Coloured Sealant in Hillside
Our CSCS-carded applicators take on coloured and colour-matched sealant for visible joints in Hillside. Send photographs or drawings for a fixed quote.
- White or grey sealant that clashes with the finish
- Shop fits that need consistent sealant colours across sites
- Colour changes after a rebrand or refit
Coloured sealant near Hillside
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Coloured sealant in Hillside
Coloured sealant work ranges from a new shop fit to replacing failed joints on an existing building on sites across Angus. On resealing, matching the existing colour is often as important as the seal itself, particularly where the building’s look matters. If you are dealing with failed coloured sealant that has split or peeled and a bead that fights the cladding or frame colour, we can put it right. A single leaking joint is often how a building in Hillside first comes to us: we check the joints around it and give you an honest view of what needs doing now and what can wait.
Scottish weather decides a lot about outside work in a place like Hillside: outside joints need dry, frost-clear surfaces, so we agree a window with some give in it. Internal joints can be done whatever the day brings.
Every job is signed off with a 12-month guarantee. It’s a plain promise: if the work we did fails within twelve months, we return to fix it.
- Location
- Hillside (DD10)
- Wider area
- Angus
- Cover
- A 12-month guarantee
- Quote
- A fixed quote before we start
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Doing it in-house
A short, simple internal joint is often within reach of a maintenance team. Where it goes wrong is preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
For a quick touch-up, site staff may be fine, but anything bigger is another matter: a specialist brings efficiency, a consistent finish and a 12-month guarantee.
What happens if it’s left?
It’s far cheaper to approve a sample than to strip and redo a full run. A short trial bead costs very little compared with replacing joints in the wrong colour. Exposed buildings in Scotland take a lot of weather, so it’s worth renewing joints around Hillside before they leak.
What a job costs comes down to how many linear metres there are, what has to come out first and how the joints are reached. Call for a quote when you are ready.
Why choose Mastic Doctor in Hillside
- A fixed quote before work starts
- Constructionline member for supplier checks
- A range of standard colours, depending on the product
- Matching to RAL references, product permitting
See our cost guide or our accreditations.
Also in Hillside
After the work
After handover, a little attention goes a long way:
- Agree the sealant colour early and write it into the specification
- Keep the area clear while the sealant cures
- Keep harsh solvents away from visible joints
- Approve a sample bead on high-profile areas
Check visible joints during routine inspections. Look for splits, lifting edges and staining and deal with problems early.
Approve a sample where colour really matters. A sample in real light shows how it will look.
Different surfaces, different methods
Natural stone
Natural stone rarely has one colour, and the sealant has to work with that. A stone-compatible, neutral-cure sealant avoids staining in a colour chosen from its range.
Shop-fit and joinery finishes
Shop fits bring laminate, timber, metal and stone together, each with its own colour. We choose sealant colours that suit each junction as agreed with the designer.
When it isn’t the sealant
Being straight saves everyone time. Fresh joints won’t solve:
- Overpainting a joint that needs a non-paintable product
- Repairing damaged frames or cladding
- Custom-mixed sealant colours
If in doubt, phone 01277 525 020 or email drawings and photos and we’ll say what we think before you book.
Surfaces we seal
- Shop-fit joinery and counters
- Powder-coated and anodised frames
- Office fit-out finishes
- Cladding panels
- Hotel bathrooms and public areas
- Natural stone and brick
Working on commercial sites near Hillside
Hillside sits close to the coast, within about 2 miles. Exposed frontages near the sea are hard on sealant, so the product has to suit the weather as well as the look. Sea-facing elevations are typically where failed joints show first. Hillside is on Scotland’s drier eastern side. Frost and condensation on winter mornings can still hold up external sealing. Outside work is booked with that in mind
Sites a few miles apart, such as Forties Road Industrial Estate and Broomfield Industrial Estate, can share one programme and one point of contact. Offices and shops close to stations such as Montrose station (to the south of Hillside) tend to be busy all day, so sealant work is planned around opening hours. A unit on an estate like Forties Road Industrial Estate (to the south-east of Hillside) typically has an office front, a trade counter and staff facilities with joints of their own.
Hillside is about 2 miles north of Montrose, in Angus. Looking for coloured sealant in Hillside? We can help. Across Angus, 65 places are covered, including Hillside. Our Dundee page has more on work in that area (27 miles or so).
We cover the DD10 postcode districts. Among the streets we cover are Scott Crescent, Dickson Avenue and Cruickshank Park. Nearby places we also cover include Montrose (2 miles south), Craigo (2 miles north-west), Ferryden (3 miles south), Marykirk (3 miles north-west) and St Cyrus (3 miles north-east). A short drive away, we cover Arbroath (13 miles south), Brechin (7 miles west), Letham (14 miles south-west), Edzell (8 miles north-west) and Friockheim (10 miles south-west).
Landmarks near Hillside
For rail, the closest station is Montrose station, about 2.1 miles south of the centre. Other landmarks nearby include Montrose Castle (2.5 miles south) and Stracathro Hospital (5.7 miles north-west). Open spaces near Hillside include Duns Dish and St Cyrus National Nature Reserve.
Questions about Hillside
Will you take on work at estates like Forties Road Industrial Estate, close to Hillside?
Yes. We cover Hillside and the area around it, including industrial estates, business parks and retail parks such as Forties Road Industrial Estate. A few photographs and the unit address let us price the work.
Does the sea air around Hillside change the choice of sealant?
It can, yes: buildings near the sea take more wind-driven rain, and salt in the air nearer the shore. We check the specified product suits the exposure and pay close attention to preparation.
Can we approve the colour on site?
Yes. A trial length can be applied and approved before the full run. The colour can shift a little as it cures, so it’s worth checking in real light.
Do you work in Hillside?
Yes. We cover Hillside, and you can phone 01277 525 020 or email a schedule or drawings to get started.
Do you have public liability insurance?
Yes. Our insurance certificate can be sent alongside the quote.
How long will the new sealant last?
It depends on movement, UV and weather, cleaning, traffic and the product. Treat them as maintenance items and inspect them regularly.
Which sealant will you use?
Where there’s a specification, we use the product it names. If not, we choose for the movement, the surfaces and the conditions, in line with the manufacturer’s guidance.
Our process
A typical day starts with protection: tape along each joint edge and covers over finishes, stock and equipment close by. On site, the work normally takes a few hours or a phased programme, depending on joint lengths and how many colours are involved, and our waste is bagged and taken away as we go. For a building near Hillside, directions, keys and a contact on the day are worth sorting early. We will confirm the plan with the fixed quote.
- The sealant type is chosen for the joint first, then the colour.
- Colour references, samples or photographs of the finish are checked against the product’s range.
- A short trial length can be approved before the full run on visible work.
- We remove the existing bead, clean the faces and set the depth.
- The coloured sealant is applied and tooled with clean, masked edges.
Before we start on site
- Agree which areas must stay open
- Confirm the product named in the specification
- Clear stock, furniture or equipment away from the joints
Request a quote
We quote a fixed sum against the scope you give us, so you know the figure before anyone is on site. To ask for one, phone 01277 525 020 or use the quote form.