Haslar coloured sealant
Work needed on a colour-matched joint in Haslar? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Coloured joints that have cracked with movement
- Poorly tooled joints on visible finishes
- Colour changes after a rebrand or refit
Coloured sealant across Haslar
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
What sets the cost
Sealant work doesn’t have a standard rate, because every site is different. What we look at:
- Location, for remote and island sites
- Any access equipment needed
- Whether old sealant has to be cut out first
- Induction, permit and paperwork requirements
Quantities, awkward access and phased working all shape the price. Site requirements like inductions and permits play a part as well.
Details that help us quote
Diagnosis starts before we arrive. Tell us:
- Specification clauses that apply
- Anything awkward about access or site hours
- Whether an asbestos survey exists
- Whether the building will be occupied during the work
Specifications, drawings and tender packages are welcome with any enquiry, and we’ll price the work to it. Smaller jobs need nothing more than photographs and a few notes.
Coloured sealant in Haslar
We take on colour-matched work across new fit-outs, refurbishments and resealing of existing joints on sites across Hampshire. When replacing old joints, the new colour usually has to match what’s already there, particularly where the building’s look matters. Site teams most often ask us about joints that need to match a new RAL frame colour and marked sealant in hotel bathrooms, across hotel bathrooms and public areas, natural stone and brick and office fit-out finishes. Facilities teams, main contractors and managing agents in Haslar tend to want the same three things: a clear scope, tidy work and joints that don’t fail again.
Business units in the countryside around places like Haslar are often converted barns, stables or farmyards. Their mix of old walls with new frames, partitions and floors means many joints between unlike materials.
The 12-month guarantee is for workmanship rather than wear and tear. Sealant wears with time, and movement, weather, cleaning and use decide how fast, so we spell out the cover before we begin.
- Where
- Haslar (PO12)
- Wider area
- Hampshire
- Cover
- A 12-month guarantee
- Price
- A fixed quote before we start
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Places near Haslar
Other services in Haslar
What Haslar’s businesses ask us to seal
The sea is no more than about 1 mile from Haslar. Exposed frontages near the sea are hard on sealant, so the product has to suit the weather as well as the look. We choose a product rated for the exposure, then confirm the colours available for it. The 3 miles around Haslar take in at least three named trading estates, business parks or retail parks. Tenant changes on such sites bring fit-outs, and fit-outs bring new joints.
For premises near Portsmouth Harbour station, which lies north-east of Haslar, footfall is part of the plan: work is phased so shops and offices keep trading. In hotels such as Anglesey Hotel, 0.7 miles west of Haslar, refurbishments typically mean bathroom, bar and reception joints where a matched sealant colour has to sit with the finishes. In a retail centre such as Tricorn Centre (2.3 miles north-east of Haslar), new tenants mean new shop fits, and the sealant at counters, frontages and floor edges is part of the finish.
Haslar is about 2 miles south-east of Gosport, in Hampshire. Haslar sits inside our coverage, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. 723 places across Hampshire fall within our area, Haslar among them.
Commercial sites across PO12 are covered for colour-matched joints. Buildings on Froude Road, Military Road and Monckton Road are within our area. If your building is just outside Haslar, we cover Clayhall (1 mile north-west), Alverstoke (1 mile west), Portsmouth Point (1 mile north-east), Privett (2 miles north-west) and Portsea (2 miles north-east). Nearby towns on our patch include Havant (8 miles north-east), Fareham (6 miles north-west), Horndean (10 miles north-east), Hedge End (12 miles north-west), Waterlooville (8 miles north-east) and Purbrook (7 miles north-east).
Landmarks near Haslar
Locally, jobs take us to sites close to The Fighting Cocks pub, Bay House School and St Vincent College and the streets around them. Haslar’s nearest station is Portsmouth Harbour station, about 1.5 miles north-east of the centre. Well-known places in the area include Tricorn Centre (2.3 miles north-east) and Southsea Castle (1.8 miles east). The countryside around Haslar includes West of the River Alver.
Our process
Diagnose, treat, sign off: every visit follows that pattern. We inspect the joints and confirm what’s in scope, then the work is carried out to the specified product and detail, and we finish with a walk round so the work can be signed off. Rural sites near Haslar may need directions, gate codes or a contact on site. Add it to your enquiry and we will build it into the plan.
- First we agree which sealant type the joint needs.
- We compare the target colour with the colours available.
- The nearest colour is agreed, with a sample bead where needed.
- We cut out the existing bead, clean and set the depth.
- Edges are masked and the coloured sealant applied and tooled.
- We remove the masking and walk the finished joints with you.
Preparing the site
- Make sure the joints can be reached
- Send any specification or drawings in advance
- Let us know about inductions and permits
Getting a fixed quote
Let us know the site, the scope and your timescale, and a fixed quote will follow. The easiest way is to call 01277 525 020 or send details through our quote form.
Advice
Site staff or a sealant specialist?
A short, simple internal joint is often within reach of a maintenance team. The usual problems come from preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
What you see is the finished bead, but most of the work is hidden. Correct depth, the right primer and a sealant matched to the movement are easy to get wrong without experience.
What sealant work can’t fix
A few problems need another trade or a different fix, and we point that out rather than sealing over them:
- Repairing damaged frames or cladding
- Paintable products in joints they aren’t suited to
- A guaranteed perfect match to every finish
If you are not sure, just call 01277 525 020 or send photos by email and we will give you a straight answer.
Surfaces we seal
- Natural stone and brick
- Hotel bathrooms and public areas
- Shop-fit joinery and counters
- Cladding panels
- Powder-coated and anodised frames
- Office fit-out finishes
After the work
Problems stay small when the joints are checked regularly. Specifically:
- Approve a sample bead on high-profile areas
- Avoid abrasive pads on coloured sealant
- Keep the area clear while the sealant cures
- Plan full-run reseals on visible elevations
Keep a record of the product and colour reference used. Future repairs can then use the same colour, avoiding a patchwork.
Make sure every contractor knows which sealant and colour are on the building file. That keeps new work in line with what’s there.
What the job involves on each surface
Brick and masonry
Brickwork joints normally look best in a colour close to the mortar or brick. The nearest colour in the range is agreed with you for the elevation.
Cladding panels
Panel joints form a grid on the facade, so colour matters. The colour is picked from the range of a sealant that suits the panel joint.
Your questions answered
Do you cover business parks and estates near Haslar, such as QinetiQ Haslar Marine Technology Park?
Yes, sites like QinetiQ Haslar Marine Technology Park are within our area, along with the rest of Haslar. To start, just call 01277 525 020 or email us with the unit, the joints involved and your access times.
Will our hotel in Haslar need to close for the work?
In most cases no closure is needed: we work room by room or floor by floor. Housekeeping and our team agree each day’s rooms.
Can you fit around our working hours?
We’re in the office from 8am until 5pm, Monday to Friday. Let us know your site hours and access windows, and the work will be planned around them.
Does coloured sealant change colour outdoors?
Exposed sealant can change in appearance over the years. UV and grime can soften or alter the colour, and resealing brings the look back.
What if there’s asbestos in the old mastic?
Asbestos is possible in some older mastics, particularly in buildings from before 2000. We check the asbestos register before cutting out old sealant in an older building, and work stops until any suspect material has been tested. We don’t remove asbestos-containing materials.
Does a coloured sealant perform differently from a standard one?
Colour is a choice within a product’s range, not a separate type of sealant. A properly prepared and tooled joint performs as the product intends.
Is it fine to apply new sealant on top of old?
No. Sealing over old material is one of the classic causes of early joint failure, so it all comes out first.