Great Stonar coloured sealant
Coloured and colour-matched sealant for visible joints across Great Stonar, by CSCS-carded applicators. CHAS accredited and fully insured.
- Weathered sealant that no longer matches
- Untidy coloured beads with ragged edges
- Failed coloured sealant that has split or peeled
Coloured sealant across Great Stonar
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Our process
Occupied buildings need a little choreography. We sign and contain the area we’re in, keep walkways clear and work section by section so the rest of the building stays in use. For work around Great Stonar, we aim to finish in one visit, so we ask for photographs and rough sizes first. That way the right products come on the day.
- Photos or drawings show us the finishes and joints.
- We send the closest colours from the product’s range.
- The programme and access are agreed, including any phasing.
- We prepare each joint, prime where needed and fit backing.
- We seal in the approved colour and tool it smooth.
Before we start on site
- Confirm the product named in the specification
- Share the asbestos register for older buildings
- Make sure the joints can be reached
Getting a fixed quote
Send details, get a quote, we seal, guaranteed: that’s how every job runs. The first step is to ring 01277 525 020 or send details through our quote form with what you know.
Advice
About our coloured sealant in Great Stonar
A colour-matched bead still has to work as a seal. Each joint is cleaned, backed to depth and tooled firmly onto both faces, with no shortcuts because it’s decorative. Careful masking keeps the edges crisp. Site teams most often ask us about colour changes after a rebrand or refit and dirty, discoloured joints in public areas, on hotel bathrooms and public areas, shop-fit joinery and counters and office fit-out finishes. Looking for mastic applicators who cover Great Stonar? We’ve been sealing commercial buildings since 2005, CHAS accredited and a Constructionline member.
Work in smaller places such as Great Stonar tends to come one building at a time: a pub kitchen, a hall, a small office. We plan the visit so everything on the list is done in one go, with the right products and colours on hand.
Building owners and contractors get the same cover: a 12-month guarantee on our workmanship. It doesn’t extend to damage, faults in the building or work by others, and we’re upfront about that.
- Place
- Great Stonar (CT13)
- Region
- Kent
- Cover
- A 12-month guarantee
- Quote
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Questions we are asked in Great Stonar
Must a hotel around Great Stonar close while you work?
In the majority of cases no closure is needed: we work room by room or floor by floor. We agree the order of rooms and the timings with you before we start.
Do you cover business parks and estates near Great Stonar, such as Birnham Farm Business Centre?
Yes. Estates, retail parks and business parks around Great Stonar, Birnham Farm Business Centre among them, are all within reach. A few photos and the unit address let us price the work.
Can you work to our specification?
Yes. We follow the specification, along with the manufacturer’s installation guidance.
What’s the quickest route to a quote?
The quote form is the simplest route, though you can also call 01277 525 020 or send details through our quote form. Include photos or drawings if you have them.
What site paperwork can you supply?
Let us know which documents the site needs, such as RAMS, an insurance certificate or CSCS details, and we will confirm them with the quote.
How do you choose the sealant?
The specification comes first, if there is one. If there isn’t one, it comes down to the joint: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.
Can you seal to a brand colour across several sites?
Yes. We work with shop fitters, hotel groups and office fit-out contractors. Our area takes in Greater London, the South East and Scotland, so a consistent colour can run across several sites.
Common problems we fix in Great Stonar
Joints repaired piecemeal often end up in several shades. Different products and batches used over the years leave a patchwork. Doing the full run in a single colour solves it.
Site and facilities staff are often the first to spot these:
- Joints that need to match a new RAL frame colour
- Patch repairs in several different colours
- Weathered sealant that no longer matches
- Shop fits that need consistent sealant colours across sites
If you run an office at a site such as Birnham Farm Business Centre (2.9 miles south-west of Great Stonar), the sealant at reception desks, tea points and frames ages with each fit-out.
What to look for in a quote
- How the existing material will be dealt with
- Will CSCS-carded applicators be on site?
- The named product and why it was chosen
- Proof of insurance
When something else is needed
Honesty saves time and money. Fresh joints won’t solve:
- Materials with mixed tones that defy a single match
- Repairing damaged frames or cladding
- Stopping sealant from ever changing colour outdoors
If you are not sure, just ring 01277 525 020 or email us and we will give you a straight answer.
Surfaces we seal
- Office fit-out finishes
- Natural stone and brick
- Powder-coated and anodised frames
- Hotel bathrooms and public areas
- Shop-fit joinery and counters
- Cladding panels
Also near Great Stonar
What else we do in Great Stonar
Sealant on show in Great Stonar’s commercial buildings
Great Stonar is within about 2 miles of the coast. Shopfronts, frames and external joints on commercial buildings there take wind-driven rain and, closer to the shore, salt in the air. Where a frontage needs a particular colour, the product still has to suit that exposure. The South East is one of the drier parts of the UK. That helps, but frost and condensation on glass and coated frames still stop outside sealing on some winter mornings.
A hotel such as The Bell Hotel (to the south of Great Stonar) shows how much sealant a hospitality building has on show, from bathroom joints to the bar. Premises within reach of Sandwich station (to the south of Great Stonar) often have busy frontages where joints are seen by everyone passing.
Great Stonar is about 5 miles south-west of Ramsgate, in Kent. Businesses, contractors and managing agents in Great Stonar use us for work on colour-matched joints. Great Stonar is one of 931 places in Kent on our list. We also cover London, around 64 miles from Great Stonar.
If you need coloured sealant in CT13, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. Buildings on Kitchener Drive, Spitfire Way and Hugin Lane are within our area. Close to Great Stonar, our area also takes in Sandwich (1 mile south), Cooper Street (2 miles west), East Street (2 miles west), Marshborough (2 miles south-west) and Woodnesborough (2 miles south-west). A short drive away, we cover Canterbury (11 miles west), Margate (7 miles north), Dover (10 miles south), Ramsgate (5 miles north-east), Broadstairs (6 miles north-east) and Whitstable (14 miles west).
Local landmarks in Great Stonar
Locally, jobs take us to sites close to Prince's Beachlands, Sir Roger Manwood's School and Invicta House Ye Olde King's Arms. The closest station to Great Stonar is Sandwich station, about 1.2 miles south. A little further out are The Precinct Toy Collection (0.8 miles south) and Sandown Castle (4.3 miles south-east). Green spaces nearby include Monk's Wall nature reserve.
Work for main contractors and building owners
Planned maintenance programmes are welcome: resealing failed joints building by building, on a schedule that suits your budget. Sites in Great Stonar can sit alongside others in a wider programme.
Building owners and managing agents use us on sealant work across single buildings or whole portfolios around Great Stonar. Several sites can go on one quote, which keeps the paperwork simple.
Quoting for work in Great Stonar
Your fixed quote is built from the real scope. It allows for:
- How accessible the joints are
- Induction, permit and paperwork requirements
- Phasing around occupants
- Removal of failed or old sealant
Every site prices differently: the joint sizes, the specified product, access and working hours each have a bearing. Send the details and a fixed figure follows.
Sending details for a quote
We can often quote from photos and a few details. Please tell us:
- Clear photos of the problem areas
- Whether an asbestos survey exists
- The product your specification calls for
- Approximate linear metres or a joint schedule
Tell us about the building, the joints and when you need the work done, and a fixed quote will follow. To get it moving, speak to us on 01277 525 020 or use the quote form.
Maintenance after handover
Sealant joints are maintenance items, and how long they last depends on how they’re treated. Our advice:
- Approve a sample bead on high-profile areas
- Insist on the agreed colour for any repair
- Reseal whole runs rather than patching single joints
- Brief cleaners about newly sealed joints
Colours can soften with light and weathering. That is normal for exposed sealant, and resealing restores the look when the time comes.
Standardise the sealant colour on multi-site work. Consistency makes future work simpler.