Coloured Sealant in Fitzrovia
Coloured sealant in Fitzrovia, backed by over 20 years in commercial sealing. Fully insured and CHAS accredited.
- Smeared sealant on stone or joinery
- White or grey sealant that clashes with the finish
- Sealant that no longer suits recoated frames
Coloured sealant for businesses in Fitzrovia
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Coloured sealant in Fitzrovia, done properly
In retail, hospitality and office fit-outs, joints are seen close up every day. A grey bead on a black shopfront or a white line against oak looks like a defect, however well it was installed. We pick a colour from the product’s range that sits with the finish. We work on shop-fit joinery and counters, powder-coated and anodised frames and hotel bathrooms and public areas, and the usual reasons a site gets in touch are a bead that fights the cladding or frame colour and coloured joints that have cracked with movement. Most enquiries from Fitzrovia start with one failed joint and grow into a wider look at the building: we look at the rest while we are there and tell you what we find.
Much of the planning for a London commercial job is about getting in and out: loading bay slots, goods lifts, permits to work and somewhere to keep materials. Once that’s settled, the colour-matched joints are resealed in sections so tenants are disturbed as little as possible.
Every job ends the same way: guaranteed. You get a 12-month guarantee on our workmanship, and we explain exactly what that covers when we quote.
- Where
- Fitzrovia (NW1W, W1T, W1G)
- Region
- Greater London
- Cover
- A 12-month guarantee
- Price
- Quoted before any work starts
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
When to call us in Fitzrovia
Sometimes the wrong colour went in at the start, or a substitute product was used. The joint may work perfectly but look out of place, so someone asks for it to be changed.
It’s worth sending us details if you spot any of the following:
- A bead that fights the cladding or frame colour
- Previous reseals that don’t match the original
- Coloured joints that have cracked with movement
- Old sealant that has yellowed, darkened or faded
Occupiers with premises at both Roman Way Industrial Estate and Regis Road Business Park could have the sealant at each handled under one quote.
What your quote should include
- How they handle RAMS and site documents
- The terms of the workmanship guarantee
- Their public liability cover
- Whether their applicators hold CSCS cards
Surface by surface
Brick and masonry
Movement joints in brickwork are long and visible. The right colour keeps them discreet without affecting the joint’s performance.
Powder-coated and anodised frames
Window, door and shopfront frames in RAL colours often need a sealant to suit. The frame colour is checked against what the product is made in, and the nearest option is agreed.
Work for main contractors and building owners
Main contractors use us as their sealant subcontractor on new-build and refurbishment projects. Programme, specification and site rules come first.
We take on planned maintenance as well as one-off repairs: working through a building or an estate in stages that fit your budget. Sites in Fitzrovia can sit alongside others in a wider programme across Greater London.
From enquiry to sign-off
We follow your site rules from the start: signing in, inductions and any permit to work. With the paperwork done, the joints are worked through in the order agreed with your site contact. In Fitzrovia, most buildings stay in use during the work, so zones and timings are agreed with whoever manages the building. Phased work keeps the rest of the building in use.
- We start with photographs, drawings or a visit to see the finishes.
- Colour options from the specified product’s range are shared with you.
- Tell us your site hours and access windows and we will plan around them.
- We prepare each joint, prime where needed and fit backing.
- We seal in the approved colour and tool it smooth.
What we need from you
- Tell us what induction or permit system the site runs
- Share the asbestos register for older buildings
- Agree which areas must stay open
Getting a fixed quote
Let us know the site, the scope and your timescale, and we will put a fixed quote together. To get it moving, phone 01277 525 020 or email the details over.
Related advice
Frontages, fit-outs and joints in Fitzrovia
A 2-mile radius around Fitzrovia takes in plenty of hotels. Refits in hotels bring joints at vanity tops, bar counters and reception desks where the colour has to suit the scheme. London premises typically come with a building manager, booked loading and house rules for contractors. We work within them, one zone at a time.
Trade counters and showrooms on estates such as Roman Way Industrial Estate (to the north-east of Fitzrovia) need neat joints where clients see them. Premises within reach of London Euston station (under half a mile north-east of Fitzrovia) often have busy frontages where joints are seen by everyone passing.
Fitzrovia is about 1 mile north-east of Marylebone, in Greater London. Commercial clients in Fitzrovia can call on us for colour-matched joints, as part of our coverage of Greater London. Our Greater London coverage takes in 764 places.
Work on colour-matched joints is covered throughout NW1W, W1T and W1G. Buildings on Euston Road, Duke's Road and Market Place are within our area. Being close to the A501 and A4200, Fitzrovia is straightforward for us to reach. If your building is just outside Fitzrovia, we cover Euston (1 mile north-east), Marylebone (1 mile south-west), Bloomsbury (1 mile east), Somers Town (1 mile north-east) and Soho (1 mile south-east). Nearby towns on our patch include Kensington (3 miles south-west), Shoreditch (3 miles east), Walthamstow (7 miles north-east), Whitechapel (3 miles east), Hampstead (3 miles north-west) and Ruislip (12 miles west).
Near you in Fitzrovia
Around Fitzrovia, our work takes us to commercial buildings near Carpenters Arms, UCL School of Slavonic and East European Studies and St Anne's Churchyard, among other places. You’ll also find Wellcome Library (under half a mile north-east) and Maria Fidelis Catholic School FCJ (less than half a mile north). There’s a railway station in Fitzrovia itself: London Euston station. Well-known places in the area include London Foot Hospital (under half a mile south-west) and Blindiana Museum (less than half a mile west). Green spaces nearby include St. James's Park Lake and Primrose Hill.
FAQs: Fitzrovia
Do you take on jobs in Fitzrovia where loading and access are tightly controlled?
Yes. Inductions, permits and timed loading are routine for us in London. The building manager’s rules go straight into our method. The ULEZ covers the whole of Greater London, which we allow for
Does a hotel in Fitzrovia need to shut while its sealant is renewed?
Rarely, if ever. We take a few rooms out at a time. Tell us your quiet periods and access windows and we will plan around them.
Is any job too small?
Whatever the size, the process is the same: details, then a fixed price, then sealing, then a 12-month guarantee.
Which sealant will you use?
Where there’s a specification, we use the product it names. If not, we choose for the movement, the surfaces and the conditions, in line with the manufacturer’s guidance.
Can you work while the building is occupied?
Yes, with some planning. Tell us your site hours and access windows and we will plan around them.
Can coloured sealant be used in washrooms and kitchens?
Yes. Wet-area sealants are made in colours as well as white. We check the colour range of the sanitary product specified before work starts.
How do you deal with asbestos in old sealant?
Asbestos is possible in some older mastics, particularly in buildings from before 2000. Before we disturb old sealant in an older building, we ask to see the asbestos register or survey, and if asbestos is suspected, work stops until it’s tested. We don’t remove asbestos-containing materials.
General trades versus a specialist
Site maintenance staff can often handle a short internal joint. The usual problems come from preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
Putting right a botched joint often costs more than sealing it well at the start, since all of it has to come out and the faces be cleaned back again. That’s why many clients bring in a specialist from the beginning.
Places near Fitzrovia
Other services in Fitzrovia
What affects the price in Fitzrovia
A fixed quote reflects the actual work. It takes account of:
- Whether old sealant has to be cut out first
- The size and state of each joint
- Working within restricted access windows
- Which sealant the job calls for
Larger quantities, tricky access or phasing all shape the price. Site requirements like inductions and permits play a part as well, along with the time of year for external work.
What we need to price the job
Diagnosis starts before we arrive. Let us know:
- Your programme or deadline
- The site address and postcode
- Anything awkward about access or site hours
- Rough lengths or quantities, or drawings if you have them
The quickest route to a quote is a few photographs and the site postcode. Send them through the quote form, or speak to us on 01277 525 020 or send details through our quote form if you’d rather talk the job through.