Coloured and colour-matched sealant in Colchester, Essex
Work needed on a colour-matched joint in Colchester? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Old colour-matched joints lifting at the edges
- Old sealant that has yellowed, darkened or faded
- Poorly tooled joints on visible finishes
Need coloured sealant in Colchester?
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
How we handle coloured sealant in Colchester
Colour is often written into the specification, by RAL reference or by matching a sample. Standard sealant ranges cover many colours, so we check what the specified product is made in. An exact bespoke match can’t always be promised, so we talk you through the nearest colours. If you have patch repairs in several different colours and stained or mouldy coloured joints in washrooms, we can help, on shop-fit joinery and counters, powder-coated and anodised frames and natural stone and brick alike. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, the work in Colchester is the same: failed joints cut out, faces prepared and the right sealant laid to the right depth.
Shop units in larger centres such as Colchester change hands and get refitted often, and each refit leaves joints at counters, shopfronts, floor edges and wall panels. Where the joint is on show, the sealant colour matters as much as the bead itself.
A 12-month guarantee applies to all our work in Essex. Should something we installed fail, ring 01277 525 020 or use the quote form and we’ll come back to it.
What we’re called out for in Colchester
A change of finish can leave existing sealant mismatched. New cladding colours, repainted frames or a refreshed shop fit all prompt colour changes.
Look out for the following:
- Standard-colour sealant spoiling a high-end finish
- Discoloured joints on a visible elevation
- Marked sealant in hotel bathrooms
- Old colour-matched joints lifting at the edges
A business with units at Colchester Retail Park and Cowdray Trade Park needn’t use two contractors for its sealant.
Questions to ask before you book
- Their public liability cover
- What site paperwork they can supply
- What the guarantee covers, and for how long
- How the joint faces will be prepared and primed
Coloured sealant around Colchester: what changes locally
There are plenty of hotels within about 2 miles of Colchester. Refits in hotels bring joints at vanity tops, bar counters and reception desks where the colour has to suit the scheme. Colchester is about 50 miles from central London. This part of the South East is dense with business parks and out-of-town offices. Multi-site occupiers here often want one sealant contractor across all their buildings.
If you look after units at a retail site such as Colchester Retail Park, under half a mile north-west of Colchester, shopfront perimeters and shop-fit joints are where a matched colour shows. For premises near Colchester Town station, less than half a mile south-east of Colchester, footfall is part of the plan: work is phased so shops and offices keep trading.
Colchester is in Essex. Looking for coloured sealant in Colchester? We can help. Our Essex coverage takes in 644 places, large and small. Our London page has more on work in that area, about 50 miles away.
Work on colour-matched joints is covered throughout CO4, CO3, CO2 and CO1. Streets here include High Street, North Station Road and Durham Square. Main routes into Colchester include the A12 and A120, useful when we plan access and materials. Close to Colchester, our area also takes in Camulodunum (1 mile west), Braiswick (1 mile west), Abbey Field (1 mile south), Lexden (1 mile west) and Beacon End (3 miles west). Nearby towns on our patch include Braintree (14 miles west), Clacton-on-Sea (12 miles south-east), Maldon (15 miles south-west), Witham (13 miles south-west), Halstead (12 miles west) and Heybridge (14 miles south-west). Among the larger centres in Essex is Colchester, and we take on colour-matched joints for its commercial and public buildings.
Landmarks near Colchester
Locally, jobs take us to sites close to Bull Meadow, The Bay And Say Public House and St John's Green Primary School and the streets around them. There’s a railway station in Colchester itself: Colchester Town station. Nearby you will also find Lion Walk (under half a mile south-east) and Essex County Hospital (less than half a mile south-west). For a walk, there’s Westhouse Wood.
How the job changes by surface
Brick and masonry
Movement joints in brickwork are long and visible. A well-chosen colour helps them blend in.
Office fit-outs
In offices, sealant appears at partitions, tea points, washrooms and reception desks. Colour-matched joints keep the finish consistent across floors at handover.
From enquiry to sign-off
On arrival, we sign in, go through any site induction and check how permits are handled. Floors, finishes and fittings next to the joints are covered before any cutting starts, and the work normally takes about the same time as any other sealant work, plus a little longer if a sample bead is agreed first. Bigger buildings in Colchester are typically done in phases agreed with the site or facilities manager, keeping disruption low. Send drawings or photos and we will set out a phasing plan with the quote.
- We confirm the joint type and the product it needs.
- We compare the target colour with the colours available.
- You approve the colour, on site if it’s critical.
- The existing bead comes out, then faces are cleaned and backed.
- Edges are masked and the coloured sealant applied and tooled.
- We remove the masking and walk the finished joints with you.
Before we start on site
- Explain the parking and delivery arrangements
- Tell us which areas need to stay in use
- Clear stock, furniture or equipment away from the joints
Get a fixed quote
Send us photos, drawings or a joint schedule are often enough for a fixed quote. Where a site visit makes more sense, we will arrange one.
Read more
When to bring in a specialist
Site maintenance staff can often handle a short internal joint. The usual problems come from preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
Redoing a failed joint usually costs more than getting it right at the outset, since all of it has to come out and the faces be cleaned back again. That’s why many clients bring in a specialist from the beginning.
Looking after the joints
Cleaning and maintenance staff play a part too. Pass these on to them:
- Keep the colour details for future repairs
- Clean coloured joints with mild products
- Keep the area clear while the sealant cures
- Use one colour standard across multi-site work
Keep a record of the product and colour reference used. Future repairs can then use the same colour.
Make sure every contractor knows which sealant and colour are on the building file. It stops mismatched repairs creeping in.
Towns and villages near Colchester
Other services in Colchester
Colchester: questions and answers
Do you offer colour-matched sealant for buildings in Colchester?
Yes. Colour matching to frames, cladding, stone and shop-fit finishes is a regular part of the work. Available colours for the product are confirmed with the quote.
Will our hotel in Colchester need to close for the work?
Rarely, if ever. We take a few rooms out at a time. Housekeeping and our team agree each day’s rooms.
Will your applicators have CSCS cards?
Yes. We use CSCS-carded applicators.
Can the building stay open while you work?
Yes, with some planning. We agree a sequence with your contact so just one area at a time is disrupted.
How many days will you need on site?
That varies with the scale of the job, but the work usually takes a day for a modest shop fit, and longer for a full building or several floors. Larger or phased jobs take longer, and we’ll give you a timescale with the quote.
Is it fine to apply new sealant on top of old?
No. We cut the old material out and clean the joint back before sealing, since fresh sealant will not bond reliably to aged material.
Can you fit around our working hours?
We’re in the office from 8am until 5pm, Monday to Friday. Let us know your site hours and access windows, and the work will be planned around them.
What affects the price in Colchester
There’s no standard rate for sealant work, since sites vary so much. What we take into account:
- The size and state of each joint
- Whether the work must be split into stages
- Which sealant the job calls for
- Removal of failed or old sealant
Cost follows what’s involved: removing old material, preparing the joints, the product, the access and how the work is phased. Call for a quote and we’ll explain how it’s made up.
What to include in your enquiry
For an accurate fixed quote, we need a clear picture of the site. Useful things to include:
- Clear photos of the problem areas
- Any dates the work must fit around
- The asbestos register, for older buildings
- The product your specification calls for
If there’s a specification, drawings or a tender package, send it with your enquiry, and we’ll price against exactly what is specified. For smaller jobs, photographs and a description will do.