Burrelton coloured sealant
We carry out coloured and colour-matched sealant for visible joints in Burrelton. Send photos or drawings for a fixed quote.
- Weathered sealant that no longer matches
- Previous reseals that don’t match the original
- Stained or mouldy coloured joints in washrooms
Coloured sealant across Burrelton
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Coloured sealant in Burrelton, done properly
We can agree a short trial length before the full run. Sealant can look slightly different once it has cured, and again in different light, so seeing it in place helps. Tell us who needs to approve the colour and we’ll plan for it. We work on natural stone and brick, cladding panels and office fit-out finishes, and the failures we’re asked to look at most are a run of joints in mismatched shades and old colour-matched joints lifting at the edges. Looking for mastic applicators who cover Burrelton? We have been sealing commercial buildings since 2005, with CSCS-carded applicators.
Scottish weather decides a lot about outside work in a place like Burrelton: sealant needs a dry joint and the right temperature, so external work has a weather window built in. Indoor work isn’t held up by rain.
Every job is signed off with a 12-month guarantee. It’s a plain promise: if our work fails within that year, we put it right.
- Place
- Burrelton (PH13)
- Region
- Perth and Kinross
- Cover
- A 12-month guarantee
- Quote
- Quoted before any work starts
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
Shops, offices and hotels in and around Burrelton
Being in the east of Scotland, Burrelton gets less rain than the west coast. Winter frost and damp frames still stop outside sealing on some days.
Colour matters on frontages and fit-outs, so the quote confirms which colours the chosen product comes in. A lasting commercial joint around Burrelton begins with the old bead fully out and the faces clean and dry.
Burrelton is about 5 miles south of Blairgowrie and Rattray, in Perth and Kinross. Businesses, contractors and managing agents in Burrelton use us for work on colour-matched joints. Our Perth and Kinross coverage takes in 114 places, large and small. Our Dundee page has more on work in that area, about 13 miles away.
Anyone looking for coloured sealant in PH13 gets the same process as the rest of our area: send details, get a quote, we seal, guaranteed. Among the streets we cover are High Street, South Street and Scott Street, and sites on any of them can send details for a fixed quote. Just outside Burrelton, we also work in Woodside (1 mile north-east), Markethill (2 miles north-east), Coupar Angus (2 miles north-east), Meikleour (3 miles north-west) and Kinrossie (3 miles south). Bigger towns within reach include Perth (10 miles south-west), Blairgowrie and Rattray (5 miles north), Letham (11 miles south-west), Scone (8 miles south-west), Tulloch (10 miles south-west) and Alyth (8 miles north).
Local landmarks in Burrelton
Well-known places in the area include Blairgowrie Community Hospital (4.9 miles north) and Castle Hill (2.6 miles west). Not far away are Gask Hill and Stormont Loch.
Common questions from Burrelton clients
Is Burrelton off your patch?
Not at all: smaller places are covered as well as towns. Our area covers all of Scotland, cities, towns and islands alike. Good photos up front let us bring everything on the first visit.
Do you offer colour-matched sealant for buildings in Burrelton?
Yes, sealants come in a wide range of standard colours, and matching to RAL references, cladding, stone or frames is a common request. Available colours for the product are confirmed with the quote.
Do you hold CHAS accreditation?
Yes. CHAS accredited, Constructionline member, and our applicators hold CSCS cards.
How soon can the area be used again?
The product and site conditions decide that. Some take light use quickly, others need longer to cure, and we confirm it before leaving site.
Can you follow the specification on our project?
Yes. Include it with the drawings when you ask for a quote, and the quote will be based on it.
How long do sealant joints last?
It depends on movement, UV and weather, cleaning, traffic and the product. Sealant joints are maintenance items, so inspect them regularly.
Is any job too small?
Single areas, one-off repairs and whole buildings are all quoted the same way: details, then a fixed price, then sealing, then a 12-month guarantee.
What sets the cost
What shapes the price:
- Backing rod, priming and other preparation
- The site’s rules and procedures
- Access and working height
- Whether old sealant has to be cut out first
Access can matter as much as the joints themselves: joints within easy reach take less time than ones that need access equipment. Tell us how the joints are reached and call for a quote.
Sending details for a quote
However big the job, these details speed things up:
- Approximate linear metres or a joint schedule
- Whether the building will be occupied during the work
- Access details, including height
- The postcode of the building
Quotes are fixed against the scope you send, so the cost is agreed before work starts. To start the process, call 01277 525 020 or send photos by email.
Honest limits
A few problems need another trade or a different fix, and we say so rather than covering them up:
- Colour variation across natural stone or brick that no single shade can match
- Restoring stained stone or masonry next to old sealant
- Custom-mixed sealant colours
If you are not sure, just call 01277 525 020 or email us and we’ll give you a straight answer before you book.
Surfaces we seal
- Shop-fit joinery and counters
- Natural stone and brick
- Hotel bathrooms and public areas
- Powder-coated and anodised frames
- Cladding panels
- Office fit-out finishes
On site: what to expect
A typical day starts with protection: tape along each joint edge and covers over finishes, stock and equipment close by. The work itself usually takes a few hours or a phased programme, depending on joint lengths and how many colours are involved, and we clear our waste as we work. Jobs near Burrelton are often grouped with others in the same area, to make the most of each trip. Let us know if your dates have any give.
- We confirm the product the joint needs before talking about colour.
- Colour references, samples or photos of the finish are checked against the product’s range.
- A short trial length can be approved before the full run on visible work.
- We take out the existing bead, clean the joints and fit backing.
- The coloured sealant is applied and tooled with clean, masked edges.
Before we start on site
- Let building users know which areas are affected
- Share the asbestos register for older buildings
- Share your working hours and any access restrictions
Get a fixed quote
A good quote starts with a clear picture: what’s there, how much of it, how we reach it and what’s specified. Share whatever details you have and we’ll fill any gaps with a visit.
Related advice
After the work
Keep the joints in good shape with a few simple steps:
- Avoid abrasive pads on coloured sealant
- Protect fresh coloured sealant from dust and handling
- Plan full-run reseals on visible elevations
- Standardise colours across a portfolio
If other trades disturb a coloured joint, ask them to tell you rather than patch it. Wrong-colour patches are obvious.
Standardise the sealant colour on multi-site work. Consistency makes future work simpler.
Doing it in-house
Site maintenance staff can often handle a short internal joint. The usual problems come from preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
Paperwork matters too. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and our CSCS-carded applicators are used to working under those rules.
Building owners, agents and FMs in Burrelton
Agents, factors and owners’ representatives all follow the same route: send details, get a fixed quote, we seal, guaranteed. We can agree access arrangements and keyholder contacts beforehand.
Blocks and communal areas make up much of the work for housing associations and agents. We phase the work so people keep access, with each stage agreed with your site contact.