Coloured and colour-matched sealant in Broom Street, Kent
We carry out coloured and colour-matched sealant for visible joints in Broom Street and the surrounding area. Send details for a fixed quote.
- Fit-outs with a sealant colour in the specification
- Weathered sealant that no longer matches
- Smeared sealant on stone or joinery
Coloured sealant in Broom Street
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Commercial premises in Broom Street
The sea is no more than about 2 miles from Broom Street. For shops, hotels and offices, that means frontage and frame joints that weather faster than they would inland. A matched colour is only half the brief on an exposed frontage. Broom Street is in the South East, one of the UK’s drier regions. That helps, but frost and condensation on glass and coated frames still stop outside sealing on some winter mornings.
If you have premises on more than one site, say at Waterham Business Park and Lamberhurst Farm Industrial Estate, one contractor and one quote can cover both. For tenants and agents on sites such as Waterham Business Park, 2 miles to the east of Broom Street, office fit-outs, reception joints and window perimeters are the usual sealant work. Shops and cafés around stations like Faversham station, 2.1 miles to the south-west of Broom Street, trade from early, so work is timed around them.
Broom Street is about 2 miles east of Faversham, in Kent. Businesses, contractors and managing agents in Broom Street can call on us for colour-matched joints, as part of our coverage of Kent. Broom Street is one of 931 places in Kent on our list for colour-matched joints. London is covered too, some 46 miles away.
We take on colour-matched joints across the ME13 postcode area. Sites close to Broom Street are covered too, including Graveney (1 mile south-east), Culmers (1 mile south-east), Goodnestone (1 mile south), Slutshole (2 miles south-east) and Hernhill (2 miles south-east). A short drive away, we cover Ashford (13 miles south), Canterbury (7 miles south-east), Sittingbourne (9 miles west), Whitstable (5 miles north-east), Herne Bay (9 miles east) and Minster (9 miles north-west).
Around Broom Street
We work on buildings around South Swale and Queen Elizabeth's Grammar School, among other places. Broom Street’s nearest station is Faversham station, about 2.1 miles south-west of the centre. A little further out are Whitstable and Tankerton Hospital (5.6 miles north-east).
Coloured sealant for commercial buildings in Broom Street
Natural materials vary across a single elevation: a stone or brick facade shifts in tone from one area to the next. The aim is a sealant colour that sits comfortably against the whole surface, agreed on site where needed. We work on office fit-out finishes, powder-coated and anodised frames and natural stone and brick, and the usual reasons a site gets in touch are sealant that no longer suits recoated frames and smeared sealant on stone or joinery. Whether you call it commercial sealant work, mastic application or joint sealing, in Broom Street it comes down to the same thing: the right product in a properly prepared joint.
Commercial sealant work around smaller places like Broom Street tends to mean pubs and restaurants, halls, farm shops and offices in converted farm buildings. Kitchens, toilets and window frames in all of them need resealing sooner or later.
Our workmanship is guaranteed for 12 months, wherever the site is. If a joint we sealed fails because of how it was installed, we come back and put it right.
- Where
- Broom Street (ME13)
- Region
- Kent
- Cover
- 12 months on our workmanship
- Price
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
How the job changes by surface
Powder-coated and anodised frames
Metallic and anodised finishes are hard to match exactly with sealant. We show you the closest options in the product’s range so you can choose.
Hotel interiors
Phased resealing lets rooms go back into use quickly. We plan around your occupancy with areas kept in use.
Building owners, agents and FMs in Broom Street
When you manage a building on behalf of an owner, clear figures and clear communication matter. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative.
Building owners and managing agents use us on sealant work across single buildings or whole portfolios around Broom Street. Several sites can go on one quote, which keeps the paperwork simple.
Nearby places to Broom Street
What else we do in Broom Street
Questions we’re asked in Broom Street
Is Waterham Business Park, near Broom Street, within your area?
Yes. We cover Broom Street and the area around it, including industrial estates, business parks and retail parks such as Waterham Business Park. To start, just call the office on 01277 525 020 or send details through our quote form with the unit, the joints involved and your access times.
Does the sea air around Broom Street change the choice of sealant?
It can, yes: buildings near the sea take more wind-driven rain, and salt in the air nearer the shore. Product choice and preparation matter more, and sea-facing elevations are worth inspecting more often.
When is resealing likely to be due?
Nobody can honestly give a figure in years, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular checks let you plan resealing before leaks or damage.
How do we ask for a quote?
It works in four steps: send details, get a quote, we seal, guaranteed. Step one needs little more than photos and a postcode.
Do you take on colour-matched sealant for shop fits and multi-site roll-outs?
Yes. Send the specification or colour reference and a fixed quote follows. Tell us your site hours and access windows and we’ll plan around them.
Does the weather affect the work?
Outside, yes. Sealant needs a dry joint and a temperature within the product’s range, so damp, frosty or very cold days can stop external work. Internal work is rarely affected.
Can you fit around our working hours?
The office is staffed Monday to Friday, from 8am until 5pm. Tell us your site hours and access windows and the work will be fitted around them.
What affects the price in Broom Street
These are the things that shape the price:
- Distance, for remote addresses
- How much there is to seal
- Whether the work must be split into stages
- The site’s rules and procedures
There’s no price list, because the scope varies so much from one building to the next. Call for a quote and we will price your job on its own details.
What we need to price the job
However big the job, the same details help:
- The postcode of the building
- Access details, including height
- Specification clauses that apply
- Your programme or deadline
Photos, drawings or a schedule of the joints and a fixed quote comes back to you. If the job needs a look first, we will arrange a site visit.
Our process
Site rules come first: signing in, inductions and any permit to work. Once we’re cleared to begin, we take the joints in the sequence agreed with you, and each area is checked before we leave it. Smaller jobs around Broom Street can be grouped with others nearby, which keeps travel down. A fixed quote is given before anything starts.
- Photos or drawings show us the finishes and joints.
- Colour options from the specified product’s range are shared with you.
- Tell us your site hours and access windows and we will plan around them.
- Joints are prepared, primed where specified and backed.
- The agreed colour is installed and tooled neatly.
Before we start on site
- Explain the parking and delivery arrangements
- Make sure the joints can be reached
- Tell us which areas need to stay in use
Get a fixed quote
Quotes are fixed against the scope you send, so you know the figure before anyone is on site. To ask for one, call 01277 525 020 or send details through our quote form.
Related advice
After the work
Problems stay small when the joints are checked regularly. In particular:
- Approve a sample bead on high-profile areas
- Note which sealant colour was used where
- Protect fresh coloured sealant from dust and handling
- Keep the same sealant colour across a brand
Check visible joints during routine inspections. Look for splits, lifting edges and staining and deal with problems early.
Standardise the sealant colour on multi-site work. It keeps repairs and new sites consistent for whoever reseals next.
General trades versus a specialist
Using site staff can make sense for a small touch-up, but larger jobs are different: a specialist brings efficiency, a consistent finish and a 12-month guarantee.
Certain joints really need a specialist: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. Getting these wrong typically costs more in the end than doing them right.