The Mastic Doctor team standing beside their branded vans outside an office building
Kent · England

Coloured and colour-matched sealant in Aldington, Kent

We carry out coloured and colour-matched sealant for visible joints in Aldington. Send details for a fixed quote.

  • Weathered sealant that no longer matches
  • Failed coloured sealant that has split or peeled
  • A bead that fights the cladding or frame colour
1
Send details
Photos, drawings or a schedule, or we visit.
2
Get a quote
One fixed quote covering the agreed scope.
3
We seal
CSCS-carded applicators, the right product for each joint.
4
Guaranteed
12-month guarantee on our workmanship.
Covering the South East & Scotland
CHAS & Constructionline
Fully insured: £5m PL

Coloured sealant near Aldington

Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.

On site: what to expect

When we get to site, we sign in, go through any site induction and check how permits are handled. Everything around the joints gets protected before anything is cut or cleaned, with the work itself usually taking about the same time as any other sealant work, plus a little longer if a sample bead is agreed first. For work around Aldington, we aim to finish in one visit, so we ask for photographs and rough sizes first. Then the right materials arrive with us.

  1. We start with photographs, drawings or a visit to see the finishes.
  2. We send the closest colours from the product’s range.
  3. The programme and access are agreed, including any phasing.
  4. We prepare each joint, prime where needed and fit backing.
  5. We seal in the approved colour and tool it smooth.

Preparing the site

  • Warn occupants and staff about the work
  • Send any specification or drawings in advance
  • Explain the parking and delivery arrangements

Quotes

Photos, drawings or a schedule of the joints and a fixed quote comes back to you. Where a site visit makes more sense, we’ll arrange one.

Get a quick quote

Read more

How we handle coloured sealant in Aldington

Stone, brick and cladding each bring their own colour challenge: sandstone, granite, brick and stained timber rarely have one flat colour. The aim is a sealant colour that sits comfortably against the whole surface. Site teams most often ask us about old colour-matched joints lifting at the edges and joints that need to match a new RAL frame colour, across cladding panels, powder-coated and anodised frames and natural stone and brick. A specialist sealant contractor works differently from a general builder: on jobs in Aldington, preparation and product choice get the time they need.

Work in smaller places such as Aldington tends to come one building at a time: a pub kitchen, a hall, a small office. We will want a full list and photos first, so the right products come on the day and nothing waits for a second trip.

We stand by our work with a 12-month guarantee. That covers our preparation and application.

Place
Aldington (TN25)
Wider area
Kent
Cover
12 months on our workmanship
Quotes
Quoted before any work starts
Telephone
01277 525 020
Last updated
3 November 2026
The Mastic Doctor team standing beside their branded vans outside an office building

Sealant on show in Aldington’s commercial buildings

Aldington lies roughly 53 miles out from central London. The commuter belt holds a great many offices, retail parks and business parks. Multi-site occupiers here often want one sealant contractor across all their buildings. Aldington sits in one of the drier corners of the country, the South East. That helps, but frost and condensation on glass and coated frames still stop outside sealing on some winter mornings.

For tenants and agents on sites such as Evegate Business Park, 1.6 miles to the north of Aldington, office fit-outs, reception joints and window perimeters are the usual sealant work. A business with units at Evegate Business Park and Bliby Business Centre needn’t use two contractors for its sealant.

Aldington is about 5 miles south-east of Ashford, in Kent. Commercial clients in Aldington can call on us for colour-matched joints. We work across 931 places in Kent, from busy centres to rural villages. Sites around Brighton have their own page, about 50 miles away.

If you need coloured sealant in TN25, the process matches everywhere else we work: send details, get a quote, we seal, guaranteed. Among the streets we cover are Earlsfield, Walnut Ridge and Badgers Close, and sites on any of them can send details for a fixed quote. Nearby places we also cover include Clap Hill (1 mile north-west), Stonestreet Green (1 mile north), Bonnington (1 mile south-west), Postling Green (1 mile south-east) and Aldington Frith (1 mile west). A short drive away, we cover Ashford (5 miles north-west), Canterbury (14 miles north-east), Folkestone (10 miles east), Hythe (6 miles east), Preston (15 miles north) and Hawkinge (10 miles east).

What’s near Aldington

Locally, jobs take us to sites close to Walnut Tree Inn and Poulton Wood, among other places. The closest station to Aldington is Ham Street station, roughly 4.1 miles south-west of the centre. Nearby you will also find Lympne Castle (3.8 miles east) and William Harvey Hospital (3.6 miles north). Open spaces near Aldington include Hatch Park.

Map of Aldington © OpenStreetMap contributors

Should maintenance staff do it?

There’s also the paperwork. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and our CSCS-carded applicators are used to working under those rules.

Site maintenance staff can often handle a short internal joint. The usual problems come from preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.

Aldington: questions and answers

Is a smaller place like Aldington outside your area?

No. Small places get the same service as large ones. We work across Greater London and the South East. Send photos and a list of what needs doing, and we will plan the job to need as few trips as possible.

Do you offer colour-matched sealant for buildings in Aldington?

Yes, sealants come in a wide range of standard colours, and matching to RAL references, cladding, stone or frames is a common request. Available colours for the product are confirmed with the quote.

What will the job cost?

That depends on the job: the volume of work, the access, the specified product and how it’s phased. Call for a fixed quote and we will price it properly.

What’s the quickest route to a quote?

There are four steps: send details, receive a fixed quote, we carry out the work, and it’s guaranteed. Step one needs little more than photographs and a postcode.

Are your applicators CSCS-carded?

Yes. Our applicators hold CSCS cards.

Can you work while the building is occupied?

In the majority of cases, yes. Phased work can be planned so areas stay in use.

How do you deal with asbestos in old sealant?

Some older mastics, especially in pre-2000 buildings, can contain asbestos. Before we disturb old sealant in an older building, we ask to see the asbestos register or survey, and if asbestos is suspected, work stops until it’s tested. Removing asbestos is a job for asbestos specialists, not us.

Surface by surface

Hotel interiors

Phased resealing lets rooms go back into use quickly. We plan around your occupancy so rooms return to service in stages.

Natural stone

Stone has variation, so the aim is a colour that sits naturally against it. A stone-safe neutral-cure product is used in a colour chosen from its range.

How the quote is worked out

There’s no standard rate for sealant work, since sites vary so much. What we look at:

  • Site requirements such as inductions and permits
  • The total length or number of joints
  • Specialist products, such as fire-rated or hygienic sealants
  • Any access equipment needed

There’s no price list, since every building and every scope is different. Call for a quote.

Before you send an enquiry

For an accurate fixed quote, we need a clear picture of the site. Send us:

  • Any dates the work must fit around
  • The type of building and who uses it
  • The postcode of the building
  • Drawings or a marked-up plan, if available

A handful of photographs and a postcode is the fastest way to a quote. Send them through the quote form, or give us a call on 01277 525 020 or send photos by email if you’d rather talk the job through.

Common problems we fix in Aldington

Sometimes the wrong colour went in at the start, or a substitute product was used. The joint may work perfectly but look out of place.

Clients usually get in touch after noticing something like this:

  • Old sealant that has yellowed, darkened or faded
  • Patch repairs in several different colours
  • Smeared sealant on stone or joinery
  • White or grey sealant that clashes with the finish

Offices and shops close to stations such as Ham Street station, 4.1 miles to the south-west of Aldington, tend to be busy all day, so sealant work is planned around opening hours.

What to look for in a quote

  • Their plan for phasing and protecting the area
  • Whether old or failed sealant will be cut out, not overlaid
  • Is the sealant right for the movement and the substrate?
  • How they handle RAMS and site documents

Questions to ask before you appoint anyone

What happens if it’s left?

Leaving a failed coloured joint risks more than appearance. Behind the bead, moisture can damage substrates and finishes. For buildings around smaller places like Aldington, water damage can go unnoticed for longer, especially where a building isn’t used daily, so a failed joint can leak for a while before anyone sees it. Renewing joints in good time avoids the problem.

Larger quantities, tricky access or phasing all shape the price. So do site requirements such as inductions and permits.

Why appoint us

  • Colour agreed before work starts
  • Matching to RAL references, product permitting
  • 12 months’ guarantee on every job
  • Standard and matched colours in many product ranges

See how commercial sealant jobs are priced and how we’re accredited.

Accreditations

Trusted. Accredited. Insured.