Coloured and colour-matched sealant in Addington, Kent
Commercial sealant work in Addington for contractors, FMs and building owners: coloured and colour-matched sealant for visible joints, quoted at a fixed price.
- Colour changes after a rebrand or refit
- Patch repairs in several different colours
- Fit-outs with a sealant colour in the specification
Need coloured sealant in Addington?
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Our process
Before any cutting starts, the area is protected: masking tape along the joint edges and sheeting over anything nearby. On site, the work typically takes about the same time as any other sealant work, plus a little longer if a sample bead is agreed first, and our waste is bagged and taken away as we go. Jobs in and around smaller places like Addington are typically planned as a single visit, so we ask for photographs and rough sizes first. That way the right products come on the day.
- Photos or drawings show us the finishes and joints.
- We send the closest colours from the product’s range.
- Tell us your site hours and access windows and we will plan around them.
- We prepare each joint, prime where needed and fit backing.
- The agreed colour is installed and tooled neatly.
Preparing the site
- Have the specification and drawings to hand
- Share your working hours and any access restrictions
- Tell us which areas need to stay in use
Ask for a quote
Need a figure for a tender or a budget? Send the scope and any drawings, and we’ll return a fixed quote that you can work with. For a chat about it beforehand, ring 01277 525 020 or email drawings and photos.
Read more
Coloured sealant in Addington
Shop fits, hotels and offices are where colour-matched sealant earns its place. A grey bead on a black shopfront or a white line against oak looks like a defect, however well it was installed. We pick a colour from the product’s range that sits with the finish. We work on shop-fit joinery and counters, powder-coated and anodised frames and hotel bathrooms and public areas, and the usual reasons a site gets in touch are fit-outs with a sealant colour in the specification and marked sealant in hotel bathrooms. Searching for sealant specialists in Addington? Mastic Doctor has worked for contractors, FMs and building owners since 2005, with CSCS-carded applicators.
Rural business units near smaller places such as Addington are frequently converted agricultural buildings. Old masonry beside new aluminium, timber and plasterboard gives plenty of joints between materials that move differently, and a sealant colour that suits the building’s character is often part of the brief.
Work we carry out comes with a 12-month guarantee. If an installation problem shows up, call the office on 01277 525 020 or send photos by email and we will arrange a return visit.
- Place
- Addington (ME19)
- Region
- Kent
- Guarantee
- 12 months on every job
- Quote
- A fixed quote before we start
- Call
- 01277 525 020
- Page updated
- 3 November 2026
Looking after the joints
Problems stay small when the joints are checked regularly. Specifically:
- Look at the cured colour before the full run
- Settle the colour with the designer at the start
- Record the product and colour reference on the building file
- Keep the same sealant colour across a brand
Include coloured sealant in planned building checks. Look for splits, lifting edges and staining, and plan resealing before it looks tired.
Settle the colour early in the project. When colour is left to the last minute, it is often wrong, so agree it with the designer at the start.
Commercial clients in Addington
Facilities managers want contractors who arrive with the paperwork sorted. Let us know the documents you need (RAMS, insurance certificate, CSCS details) and we’ll confirm them with the quote.
We work for building owners and managing agents on sealant work across single buildings or whole portfolios around Addington. Several sites can go on one quote, which keeps the paperwork simple.
Coloured sealant around Addington: what changes locally
Addington is in the South East, one of the UK’s drier regions. That helps, but frost and condensation on glass and coated frames still stop outside sealing on some winter mornings. A 2-mile radius around Addington takes in a number of hotels. Hotel refurbishments are where a matched sealant colour earns its place: bathroom, bar and reception joints have to sit with the finishes.
If you have premises on more than one site, say at Kings Hill Business Park and Invicta Business Park, one contractor and one quote can cover both. For tenants and agents on sites such as Kings Hill Business Park, 2.1 miles to the south of Addington, office fit-outs, reception joints and window perimeters are the usual sealant work. In hotels such as Bear Hotel, 1.4 miles to the south-east of Addington, refurbishments typically mean bathroom, bar and reception joints where a matched sealant colour has to sit with the finishes.
Addington is about 7 miles north-west of Maidstone, in Kent. We cover Addington and the rest of Kent, with the same fixed quotes and 12-month guarantee as everywhere else. Our Kent coverage takes in 931 places. London is covered too, around 25 miles from Addington.
We cover the ME19 postcode districts. Buildings on London Road, The Links and Trottiscliffe Road are within our area. Close to Addington, our area also takes in Ryarsh (1 mile north-east), Trottiscliffe (1 mile north-west), Vigo Village (2 miles north-west), Culverstone Green (3 miles north-west) and Harvel (3 miles north). Further afield, our area takes in Maidstone (7 miles south-east), Sittingbourne (15 miles east), Dartford (12 miles north-west), Sevenoaks (9 miles west), Royal Tunbridge Wells (13 miles south-west) and Gravesend (9 miles north).
Landmarks near Addington
Locally, jobs take us to sites close to The Angel Inn, The Malling School and Manor Park Country Park, among other places. The closest station to Addington is West Malling station, about 1.8 miles south-east of the centre. Well-known places in the area include Coldrum Long Barrow (1.2 miles north) and Leybourne Castle (1.7 miles east).
Common questions from Addington clients
Do you cover business parks and estates near Addington, such as Kings Hill Business Park?
Yes. Estates, retail parks and business parks around Addington, Kings Hill Business Park among them, are all within reach. Photos and a short description are enough for a first look.
Is Addington too far out for you?
Not at all: smaller places are covered as well as towns. London and every South East county are within our area. Where we can, we group nearby jobs to make the most of each trip.
What will the job cost?
That depends on the job: the volume of work, the access, the specified product and how it’s phased. Call for a quote.
Can wet areas have colour-matched sealant?
Yes, in many cases. Coloured sanitary sealant suits tiled and stone wet areas in commercial interiors.
Do you take on colour-matched sealant for shop fits and multi-site roll-outs?
Yes. Tell us the product and colour reference and we will confirm availability. We plan around trading hours where we can, within our working week.
Do you work to architects’ specifications?
Yes. Include it with the drawings when you ask for a quote, and we’ll price the work to it.
Can you work while the building is occupied?
Yes, as long as we plan it. We agree a sequence with your contact so just one area at a time is disrupted.
What we can’t put right
A few problems need another trade or a different fix, and we say so rather than covering them up:
- Restoring stained stone or masonry next to old sealant
- Preventing all fading from sunlight and weathering
- Paintable products in joints they aren’t suited to
If in doubt, speak to us on 01277 525 020 or use the quote form and we’ll say what we think before you book.
Joints and surfaces we work on
- Cladding panels
- Powder-coated and anodised frames
- Office fit-out finishes
- Natural stone and brick
- Hotel bathrooms and public areas
- Shop-fit joinery and counters
Places near Addington
What else we do in Addington
How the job changes by surface
Powder-coated and anodised frames
Metallic and anodised finishes are hard to match exactly with sealant. We’ll suggest the nearest standard colours so you can choose.
Cladding panels
Cladding joints are often seen across a whole elevation. We pick a facade-grade sealant in a shade that sits with the panels.
Should maintenance staff do it?
For most general trades, sealant is a sideline. A specialist prepares properly, controls joint depth and picks a product with the right movement class, which is what makes a joint last.
Putting right a botched joint often costs more than sealing it well at the start, since all of it has to come out and the faces be cleaned back again. That’s why many clients bring in a specialist from the beginning.