Commercial washroom and wet-area sealing in Street End, West Sussex
Our CSCS-carded applicators take on sealing in commercial washrooms, showers, kitchens and wet areas in Street End. Send photographs or drawings for a fixed quote.
- Split or peeling sealant at shower trays
- Kitchen worktop joints that can’t be kept clean
- Open joints along basins and vanity units
Washroom sealing across Street End
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
What we are called out for in Street End
Panels and vanity units move slightly in use, and shower trays shift under foot. A bead that can’t cope with the movement splits along one edge.
Things that normally lead to an enquiry:
- Sealant lifting along a tray edge
- Kitchen worktop joints that can’t be kept clean
- Open joints along basins and vanity units
- Open joints at the base of cubicle panels
Staff changing rooms and patient toilets at places like St Richard's Hospital (to the north of Street End) need cleanable, sound silicone.
Comparing quotes
- Their pre-qualification and accreditations
- Whether primer will be used where the manufacturer specifies it
- Will RAMS and insurance details be available?
- Whether their applicators hold CSCS cards
How we handle washroom sealing in Street End
In a commercial washroom, sealant is normally the first thing to wear out. Basin tops, urinal backs, panel joints and shower trays put it under water, chemicals and daily cleaning and mould that roots into it can’t be cleaned away. We strip it out and lay new anti-mould sanitary silicone. If you are dealing with washrooms that look worn because of the sealant and mould spotting along silicone joints, we can help. Whoever orders the work in Street End, the brief is usually the same: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
In and around smaller places like Street End, washroom work is often in halls, pubs, primary schools, care homes and holiday accommodation. Sealant that has gone black with mould normally can’t be cleaned, so it is cut out and replaced.
Every job is signed off with a 12-month guarantee. It’s a plain promise: if our work fails within that year, we put it right.
- Place
- Street End (PO20)
- Region
- West Sussex
- Guarantee
- 12 months on every job
- Price
- A fixed quote before we start
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
What sealant work can’t fix
Being straight saves everyone time. New sealant won’t cure:
- Fittings that move too much to hold a bead
- Failed tanking beneath a wet-room floor or behind tiles
- Leaking pipes, traps, wastes or cisterns, which need a plumber
If in doubt, call the office on 01277 525 020 or email a schedule or drawings and we’ll say what we think before you book.
What we seal
- Urinals and WCs
- Kitchens and tea points
- Showers, trays and wet room floors
- IPS panels and cubicles
- Vanity units and basins
- Accessible toilets and changing rooms
Surface by surface
Healthcare and care settings
Assisted bathrooms and accessible toilets get heavy use so their sealant tends to fail sooner.
Wet-room floors and floor-to-wall joints
Changing rooms and accessible showers often have wet floors, so their perimeter joints get close attention.
Commercial washrooms in Street End
The sea is no more than about 2 miles from Street End, and coastal hotels, guest houses and holiday sites tend to fill up in the busy months. Washrooms used guest after guest wear their sanitary silicone faster, and the quieter months are the natural time to reseal. A 2-mile radius around Street End takes in several hotels. Behind every hotel door there’s a bathroom whose sealant will need renewing sooner or later. Rooms are done in turn so most stay available.
At a university such as University of Chichester, which lies north-east of Street End, summer is the usual window for resealing residence bathrooms. Office toilets at parks like Enborne Business Park, 1.5 miles to the south of Street End, take steady weekday use, and mouldy silicone soon shows.
Street End is about 4 miles north of Selsey, in West Sussex. Businesses, contractors and managing agents in Street End can call on us for washrooms and wet areas. Street End is one of 373 places we cover in West Sussex. For work in that direction, see our Portsmouth page, about 13 miles away.
Anyone looking for washroom sealing in PO20 gets the same process as the rest of our area: send details, get a quote, we seal, guaranteed. We cover commercial and managed buildings on Church Lane, Selsey Road and Chalder Lane. We also cover Sidlesham Common (1 mile north-west), Sidlesham (1 mile south), Keynor Estate (1 mile south), Fisher (1 mile north-east) and South Mundham (2 miles north-east) for washrooms and wet areas. Nearby towns on our patch include Bognor Regis (5 miles east), Chichester (4 miles north), Selsey (4 miles south), Littlehampton (11 miles east), Rustington (12 miles east) and Angmering (14 miles east).
Landmarks near Street End
The nearest railway station is Chichester station, about 3.2 miles north. Nearby you will also find Chichester Castle (3.8 miles north) and Chichester Cathedral Treasury (3.4 miles north).
On site: what to expect
Before any cutting starts, the area is protected: masking tape along the joint edges and sheeting over anything nearby. The work itself normally takes a morning or so for a small washroom, longer where showers and changing rooms are included, and we clear our waste as we work. Jobs in and around smaller places like Street End are typically planned as a single visit, so photographs and measurements up front really help. Then the right materials arrive with us.
- Every washroom is checked joint by joint, with loose panels, leaks or damp noted for the right trade.
- We agree which rooms close and when, so users always have somewhere to go.
- The failed silicone is stripped and every face scraped clean of residue.
- We clean and dry every surface so the new sealant can grip.
- A bead of anti-mould sanitary silicone goes in and is tooled to a smooth, cleanable profile.
- You get a reopening time for every room, with signage left up until then.
What we need from you
- Send your site hours and access windows
- Let building users know which areas are affected
- Send asbestos survey details if the building is pre-2000
Ask for a quote
A good quote starts with a clear picture: the joints involved, quantities, access and the product called for. Send what you have, and we’ll arrange a site visit if anything is unclear.
Related advice
Common questions from Street End clients
Is Street End too far out for you?
Not at all. Street End is within our area. We work across Greater London and the South East. Where we can, we group nearby jobs to make the most of each trip.
Do hotels near Street End have to close for sealant work?
In most cases no closure is needed: we work room by room or floor by floor. We agree the order of rooms and the timings with you before we start.
Are you CHAS accredited?
Yes. CHAS accredited, Constructionline member, and our applicators hold CSCS cards.
How do you deal with asbestos in old sealant?
Managing asbestos is the dutyholder’s responsibility, so we’ll ask for the register before work on an older building. If anything suspect turns up, we stop until it’s tested.
Is colour matching possible?
It depends on the product specified. Some ranges are wide, others limited, so we’ll confirm the colours available for the specified product with the quote.
When can showers be used after new sealant?
Each sealant has a cure time before it should get wet. We plan the phasing around that so there are always rooms open.
Can weather delay the job?
Outside, yes. Sealant needs a dry joint and a temperature within the product’s range, so frost, rain or cold mornings can delay outside work. Internal work is rarely affected.
For managing agents and facilities managers
Facilities managers want contractors who arrive with the paperwork sorted. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we’ll confirm with the quote.
Building owners and managing agents use us on everything from one building to a spread of sites. One quote can cover more than one site, so there’s one set of paperwork to deal with.
Doing it in-house
Site maintenance staff can often handle a short internal joint. The usual problems come from preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
For most general trades, sealant is a sideline. A specialist prepares properly, controls joint depth and picks a product with the right movement class, which is what makes a joint last.