Oxfordshire · England
Commercial sealant contractors in OX20
We cover every part of the OX20 postcode district, which takes in Woodstock, Wootton and Bladon. Failed sealant is always cut out completely, with a 12-month guarantee.
Need sealant work in OX20?
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Areas within OX20
Sealant work we offer in OX20
- Industrial and floor joint sealing
- Expansion and movement joint sealing
- Commercial sealant contractors
- Construction and new-build mastic
- Facade and window perimeter sealing
- Coloured and colour-matched sealant
- Fire-rated sealing and fire stopping
- Mastic sealing for building owners and managing agents
- Commercial washroom and wet-area sealing
- Every service
Tell us what needs doing and your postcode and we’ll come back with a price: call 01277 525 020 or email the details over.
Neighbouring districts
Elsewhere in Oxfordshire
Every town in Oxfordshire
Every area we cover
About commercial sealant contractors in OX20
Sealant joints are easy to overlook until one lets water in, and on a working site that normally surfaces as a leak, a stain or a complaint from occupiers. We’re commercial sealant applicators for FMs, managing agents, landlords and contractors looking after property in OX20. We find out why the sealant joints failed, take them out and seal again using a sealant that suits the joint. Most enquiries involve messy, uneven beads from earlier work that let the building down and mouldy silicone around WCs, urinals and vanity tops, on movement joints in walls and floors, kitchen worktops and splashbacks and floor and threshold joints.
In a busy building, we agree a sequence with your contact so the disruption stays in one area at once. Each area is protected, prepared and sealed before the next one starts.
- We begin with whatever information you have, whether that’s photographs, a drawing or a list of locations, or we arrange a site visit.
- Next comes a diagnosis and a fixed quote.
- Site hours, access windows and the order of areas are agreed before we start.
- Failed sealant is cut out and each joint cleaned back to sound, dry faces.
- We fit backing to the right depth, prime where specified and lay the new bead.
- Each area is inspected, signed off and backed by our 12-month guarantee.
What you will pay
No two sites price the same: joint size, product, access and site hours all play a part. A fixed quote follows once we understand the job.
Why choose Mastic Doctor
- RAL and finish matching where the product range allows
- CHAS accredited
- Over 20 years of commercial sealing
- Standard and matched colours in many product ranges
Get a fixed quote
Specifications, drawings and tender packages are welcome with any enquiry, and we will price the work to it. For smaller jobs, photographs and a description will do.
Around Woodstock
In Woodstock, that means premises near Church of St Mary Magdalene, Marlborough School and The Punchbowl Inn. The nearest railway station is Hanborough station, roughly 2 miles south-west. Other landmarks nearby include Soldiers of Oxfordshire Museum (0.5 miles west).
Commercial sealant contractors across OX20: the area picture
From Woodstock, Wootton and Bladon outwards, OX20 has a broad spread of commercial premises: shops, offices, hotels, restaurants and units. Because we cover all of it, multi-site occupiers can bring every building under one quote.
The South East has large numbers of business parks and industrial estates, especially around the motorway corridors, and OX20 is part of the area we cover.
Woodstock: If you have premises on more than one site, say at Oxford Spires Business Park and Hanborough Business Park, one contractor and one quote can cover both. For tenants and agents on sites such as Oxford Spires Business Park, 1.9 miles to the south-east of Woodstock, office fit-outs, reception joints and window perimeters are the usual sealant work.
How the job changes by surface
Facade and cladding joints
Panel joints on cladding and rendered facades open and close with the temperature. The product has to suit the movement, and the depth has to be controlled with backing. Access, such as scaffold already up, is agreed before the price is fixed.
Commercial kitchens and tea points
Gaps and ragged beads trap dirt that cleaning can’t reach, and cleanability is part of what an inspector looks at. Work is timed around the hours you give us so the kitchen isn’t out of use longer than needed.
Cost factors for sealant joints
Your fixed quote is built from the real scope. It takes account of:
- The size and state of each joint
- Removal of failed or old sealant
- Any access equipment needed
- How much there is to seal
The work involved drives the cost: stripping out, preparation, sealing, access and phasing. Call for a fixed quote and we will explain how it’s made up.
Sending details for a quote
We can often quote from photographs and a few details. It helps to include:
- Rough lengths or quantities, or drawings if you have them
- Anything awkward about access or site hours
- Where the site is, with the postcode
- Whether an asbestos survey exists
To get a fixed quote, call the office on 01277 525 020 or use the quote form with the site address and an outline of the work. You can also send details through our quote form.
What happens if it’s left?
Spot repairs have their place. If the rest of the bead is the same age and product, though, it’s normally close behind, so access and set-up end up being paid for twice. We can price both options so you can decide on the facts.
Comparing quotes
- Are they CHAS accredited or on Constructionline?
- How they handle RAMS and site documents
- Their approach to joint depth and backing
- Proof of insurance
Building owners, agents and FMs in OX20
CHAS accredited and a Constructionline member, we make supplier vetting simple. We’re fully insured, and our insurance certificate can go with the quote.
We take on planned maintenance as well as one-off repairs: working through a building or an estate in stages that fit your budget. Sites in OX20 can sit alongside others in a wider programme across Oxfordshire.
Looking after the joints
To get the most from the new sealant:
- Check sealant as part of routine building inspections
- Report cracked or peeling sealant early
- Keep abrasive pads and scrapers off resealed joints
- Check the asbestos register before anyone disturbs old sealant in an older building
Keep an eye out for other trades after we’ve gone. When fittings are moved or cabling added, the sealant nearby is easily disturbed and the joint gets left open. If that happens, speak to us on 01277 525 020 or send photos by email and we will price putting it right.
Once sealant fails in a movement joint, grit and debris get in. With nothing soft to close against, the materials either side take the load and start to break up. At that point it’s a repair job rather than a reseal.
Questions we’re asked in OX20
Who decides which product is used?
If the job is specified, we follow the specification. If not, we choose for the movement, the surfaces and the conditions, in line with the manufacturer’s guidance.
How is commercial sealant work priced?
Start with whatever information is to hand. Questions or a site visit follow where needed.
How many days will you need on site?
It depends on the scope, but the work usually takes a few hours to several days on most single sites, depending on joint lengths and access. Larger or phased jobs take longer, and we’ll give you a timescale with the quote.
Is it fine to apply new sealant on top of old?
No, never. Sealing over old material is one of the classic causes of early joint failure, so it all comes out first.
What site paperwork can you provide?
Let us know your requirements when you ask for a price, and we’ll confirm the RAMS, insurance and CSCS details with the quote. For older buildings we will ask for the asbestos register, plus your site induction rules.
How long before the joints can be used?
We’ll confirm how long the chosen product needs to cure.
Is it OK to apply fresh sealant over existing beads?
Full removal is part of every quote. A bead laid on old silicone peels away, so it isn’t something we do.