East Lothian · Scotland
Commercial sealant contractors in EH31
Commercial sealant, construction mastic and joint sealing across EH31, covering Gullane, with a fixed quote before we start.
Mastic and sealant across EH31
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Places in EH31
Sealant work we offer in EH31
- Commercial washroom and wet-area sealing
- Coloured and colour-matched sealant
- Mastic sealing for building owners and managing agents
- Fire-rated sealing and fire stopping
- Commercial sealant contractors
- Facade and window perimeter sealing
- Industrial and floor joint sealing
- Construction and new-build mastic
- Expansion and movement joint sealing
- Every service
Tell us what needs doing and your postcode for a fixed quote: phone 01277 525 020 or email a schedule or drawings.
Postcodes nearby
Elsewhere in East Lothian
All places in East Lothian
Areas we cover
About commercial sealant contractors in EH31
A reseal stands or falls on the preparation underneath it. Silicone has no grip on cured silicone, so the failed bead is cut out completely. Where the sealant maker specifies a primer for that substrate, it goes on before the new bead. Most enquiries involve a top-up bead over failed sealant, now lifting and frame mastic that has hardened and come away from the wall, on movement joints in walls and floors, floor and threshold joints and washrooms and tea points.
Diagnose, treat, sign off: every visit follows that pattern. We inspect the joints and confirm what’s in scope, then the work is carried out to the specified product and detail, and the job ends with a walk round and sign-off.
- We begin with whatever information you have, whether that’s photos, a drawing or a list of locations.
- Next comes a diagnosis and a fixed quote.
- We plan around your site hours and access windows, phasing the work where areas have to stay in use.
- The failed bead is removed and the joint faces cleaned until they’re sound and dry.
- We fit backing to the right depth, prime where specified and lay the new bead.
- We walk the completed areas with you and sign them off under the 12-month guarantee.
What affects the price in EH31
We don’t publish prices, since every building and every scope is different. For a fixed figure, call for a quote.
Why clients in EH31 choose us
- Colour agreed before work starts
- Workmanship guaranteed for 12 months
- One number for every site we cover
- Specification-led, product-correct work
Get a fixed quote
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. To take the first step, give us a call on 01277 525 020 or email drawings and photos.
Around Gullane
Around Gullane, our work takes us to commercial buildings near St Peter’s Church. Gullane’s nearest station is Drem station, about 2.6 miles south-east. Well-known places in the area include Edington Cottage Hospital (4.3 miles east) and Heritage Of Golf Museum (0.5 miles west). Green spaces nearby include Skid Hill and Marl Loch.
Shops, offices and hotels in EH31
Shop fits, office refurbishments and hotel refits in towns such as Gullane all leave joints that need sealing. Where the joint is on show, a colour that suits the finish is part of the job.
The west of Scotland is wetter than the east, but external sealing anywhere in Scotland needs a dry joint and the right temperature, so we keep some flexibility in the dates.
Gullane: Shops and cafés around stations like Drem station, 2.6 miles to the south-east of Gullane, trade from early, so work is timed around them. A hotel such as Golf Hotel (to the west of Gullane) shows how much sealant a hospitality building has on show, from bathroom joints to the bar.
What sealant work can’t fix
Sealant solves a lot, but not everything, and we’d rather tell you before you spend money. These need a different solution:
- A failed roof covering or waterproofing membrane
- Suspect materials that need testing and specialist removal
- Cracking that needs a structural engineer to look at it
Site staff or a sealant specialist?
Redoing a failed joint normally costs more than getting it right at the outset, because the whole bead must be removed and the faces cleaned back again. That’s why many clients bring in a specialist from the beginning.
Some joints are best left to specialists: for instance fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. Getting these wrong normally costs more in the end than doing them right.
Cost factors for sealant joints
Your fixed quote is built from the real scope. It takes account of:
- The total length or number of joints
- Site requirements such as inductions and permits
- How much existing material needs removing
- Any access equipment needed
The price depends on how many linear metres there are, how much old material needs removing and the access. Call for a quote once you have the details.
Before you send an enquiry
Whether it’s one area or a whole building, the same details help:
- Any dates the work must fit around
- Access details, including height
- A wide shot and a close-up of the area
- The site address and postcode
Every quote starts with the facts: the joints involved, quantities, access and the product called for. Send what you have, and we’ll arrange a site visit if anything is unclear.
Aftercare for building managers
Regular inspection catches problems early. Specifically:
- Act on the first lifting edges rather than waiting
- Keep barriers up until the new sealant has cured
- Brief cleaning contractors to avoid scourers and blades on sealant
- Ask fit-out and M&E contractors to report any sealant they disturb
Let your cleaning contractor know what’s new. Abrasive pads, scrapers and some strong chemicals damage sealant surfaces, while a neutral cleaner and a soft cloth do no harm.
Movement joints that fill with debris stop working. With nothing soft to close against, the materials either side take the load and start to break up. At that point it’s a repair job rather than a reseal.
Different surfaces, different methods
Shop fronts and retail fit-outs
In retail, sealant is on show. Counters, display units, shopfront frames and floor trims all need a neat line. Colour options are confirmed with the quote.
Movement joints in walls and floors
Floor joints that take trolleys or forklifts need a tougher filler or sealant. The choice comes down to how much the joint moves and what runs over it, and tell you if the edges need repairing first.
FAQs: EH31
Is the old sealant taken out first?
The old bead is stripped out first. After that come cleaning, primer where needed, backing and the new sealant.
Do you take on multi-site sealant work?
Yes. We take on runs of jobs across portfolios as well as single sites, quoted per building or as a package.
Is EH31 in your area?
Yes. Sites across EH31 are covered, and the same phone number covers every area.
Can weather delay the job?
Outside, yes. The joint has to be dry and within the product’s temperature range, so damp, frosty or very cold days can stop external work. Inside work is seldom held up.
What site paperwork can you provide?
Let us know your requirements when you ask for a price, and we will confirm the RAMS, insurance and CSCS details with the quote. For older buildings we’ll ask for the asbestos register, plus your site induction rules.
Could the old sealant in an older building contain asbestos?
It can, on some older buildings. That’s why we ask for the asbestos information first, and stop if a material is suspect until it’s tested.
What do you need from us to quote?
Send photos, drawings or a list of locations through the quote form on this site. If a visit is needed we’ll book one, and a fixed quote follows.