The Mastic Doctor team standing beside their branded vans outside an office building
Oxfordshire · England

Mastic Sealing in Fernham

Sealant work in Fernham for main contractors, managing agents and facilities managers: mastic sealing for building owners, managing agents and housing associations, quoted at a fixed price.

  • The same joint failures repeated across a portfolio
  • Worn sealant at communal door frames
  • Open joints in brickwork or panels
1
Send details
Tell us about the site, with photos if you have them.
2
Get a quote
One fixed quote covering the agreed scope.
3
We seal
Prepared joints, the specified product, a tidy finish.
4
Guaranteed
Signed off, with 12 months’ guarantee.
London, the South East & Scotland
CHAS & Constructionline
£5m PL insurance

Mastic sealing for businesses in Fernham

Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.

Common questions from Fernham clients

Do you take on block-wide or estate-wide mastic work in Fernham?

Yes, we quote for single buildings and for programmes across several blocks. Send the addresses and photos and we’ll give a fixed quote.

Is Faringdon Business Park, near Fernham, within your area?

Yes. Estates, retail parks and business parks around Fernham, Faringdon Business Park among them, are all within reach. Send details of the unit and the work through our quote form for a quick quote.

How long does a job like this take?

We plan the time on site around your programme and access. You will have an expected duration with the quote.

Can people stay in the building while you reseal?

Occupiers stay in the building throughout. We flag any areas that need internal access well before the dates so it can be arranged.

When can the area be used after sealing?

The product and site conditions decide that. Some products skin over quickly but need longer to cure fully, and we confirm it before leaving site.

Will you just go over the old sealant?

No. Failed sealant is removed and the faces cleaned back to sound, dry material first, since fresh sealant will not bond reliably to aged material.

Which sealant will you use?

The specification comes first, if there is one. Without one, the joint decides: its movement, its surfaces and what it has to cope with.

Mastic sealing in Fernham

Owners and agents usually inherit a building’s mastic rather than choose it and it slowly wears out: window perimeters, door frames, external joints and communal junctions all rely on it. Once it cracks, hardens or comes away, draughts and water find a way in, and occupiers start reporting it. If you have damaged joints in communal entrances and corridors and draughts at frames across a block, we can help. Most enquiries from Fernham start with one failed joint and grow into a wider look at the building: we check the joints around it and give you an honest view of what needs doing now and what can wait.

For owners with a single building near Fernham, we plan to finish in one visit where possible. Send photographs of the frames and joints and we will give a fixed quote.

Every job we finish is backed by a 12-month workmanship guarantee, wherever the site is. If a joint we sealed fails because of how it was installed, we come back and put it right.

Mastic Doctor team members lined up next to their branded vans outside an office building
Location
Fernham (SN7)
Region
Oxfordshire
Guarantee
12 months on our workmanship
Price
Fixed quote, scope in writing
Telephone
01277 525 020
Last updated
3 November 2026

For owners and agents in Fernham

Rainfall across the South East, Fernham included, is lower than in many parts of the UK. External mastic still waits for dry faces and the right temperature, and south- and west-facing elevations, which take the most sun and rain, often age first. Central London is about 64 miles from Fernham. Within reach of London, blocks run by agents and associations are common around stations, and window and balcony mastic on them tends to age at the same rate.

Older buildings near Fernham, from historic houses such as Buscot Park (to the north-west of Fernham) to more modest stock, need compatible products when frames are resealed. Trustees of buildings like Church of St John can bring frame and external mastic into a planned maintenance list. For owners of several units at places like Faringdon Business Park, 1.4 miles to the north-west of Fernham, one programme can deal with frame and external mastic across the lot.

Fernham is about 7 miles west of Wantage, in Oxfordshire. We send applicators to Fernham for mastic joints. Fernham is one of 423 places we cover in Oxfordshire for mastic joints. Our Oxford page has more on work in that area.

We cover the SN7 postcode districts for mastic joints. Streets here include High Street, Church Lane and The Green, and sites on any of them can send details for a fixed quote. Sites close to Fernham are covered too, including Little Coxwell (1 mile north-west), Baulking (2 miles south-east), Uffington (2 miles south-east), Shellingford (2 miles north-east) and Faringdon (2 miles north). Nearby towns on our patch include Didcot (14 miles east), Abingdon-on-Thames (13 miles east), Witney (12 miles north), Carterton (10 miles north), Wantage (7 miles east) and Grove (7 miles east).

Landmarks near Fernham

Well-known places in the area include Faringdon Castle (2.4 miles north) and Uffington Museum (1.8 miles south). Open spaces near Fernham include Badbury Hill.

Map of Fernham © OpenStreetMap contributors

Different surfaces, different methods

Window and door perimeters on blocks

On most blocks, the frame-to-wall joint is where failure shows first. Old perimeter mastic is removed, the joint prepared and new sealant tooled in.

External movement joints

External movement joints take up expansion and contraction. Failed sealant in a movement joint lets water in.

Keeping the joints sound

Problems stay small when the joints are checked regularly. Specifically:

  • Check sealant joints during planned building inspections
  • Group repairs into a planned programme
  • Keep a record of when each building was resealed
  • Check the asbestos register before any old mastic is disturbed

Encourage occupiers to report water or draughts at frames. Early reports catch failures before damage spreads.

The longer failed joints are left, the more likely the substrate edges break up. Then the edges may need repairing first.

What we can’t put right

Before quoting, we check that sealant is the right answer. It won’t put right:

  • Roof leaks, gutters or failed flashings that aren’t sealant joints
  • Cracked or crumbling render, brick or stone at the joint edges (we’ll tell you if so)
  • Frames that are rotten, warped or broken

Not sure which it is? You can call 01277 525 020 or send photos by email and we’ll tell you honestly before you book.

Surfaces we seal

  • Communal entrances and stairwells
  • External wall and movement joints
  • Shopfronts below residential blocks
  • Balcony and threshold joints
  • Communal kitchens and washrooms
  • Window and door perimeters on blocks

Quoting for work in Fernham

What shapes the price:

  • Quantities, in metres or numbers
  • Travel to remote or island sites
  • Site requirements such as inductions and permits
  • Working within restricted access windows

The product called for affects the cost, and so does the preparation, such as cutting out, priming or new backing rod. Access, phasing and site requirements come into it too.

What to include in your enquiry

Whether it’s one area or a whole building, these details speed things up:

  • Any specification or named product
  • What the building is and how it’s used
  • The postcode of the building
  • Drawings or a marked-up plan, if available

Every quote starts with the facts: the joints involved, quantities, access and the product called for. Send what you have, and we will arrange a site visit if anything is unclear.

How a job runs

We schedule the visit to fit the site hours and access windows you give us. While we are working, the area stays contained and tidy, and your contact hears from us before we move to the next area. For work around Fernham, we aim to finish in one visit, so photos and measurements up front really help. That way the right products come on the day.

  1. A building-by-building inspection lists the failed joints.
  2. The quote is fixed and split as suits you.
  3. We agree the programme and dates with you.
  4. Failed sealant is removed and the faces prepared.
  5. New sealant goes in with backing rod and primer where needed.
  6. We check the finished work and confirm the guarantee.

Preparing the site

  • Send any specification or drawings in advance
  • Send your site hours and access windows
  • Point out any areas we must not close

Getting a fixed quote

Quotes are fixed against the scope you send, so the cost is agreed before work starts. To start the process, give us a call on 01277 525 020 or send photos by email.

Get a price

Advice

Leave it or put it right?

Resealing ahead of leaks keeps it to a maintenance task. After water has got in, there may be damp, damaged plaster or decoration to put right too and occupiers notice. Older rural buildings around Fernham move with the seasons, and rigid or tired sealant can’t keep up. A sealant with the right movement capability, correctly sized, lasts far better.

No two sites price the same: the joint sizes, the specified product, access and working hours each have a bearing. Send the details and a fixed figure follows.

What you get with us

  • Failed material removed, not covered up
  • A range of standard colours, depending on the product
  • CSCS-carded applicators
  • Colours confirmed for the specified product

Read how commercial sealant jobs are priced or our accreditations.

Accreditations

Trusted. Accredited. Insured.