Mastic sealing for building owners and managing agents in Conford, Hampshire
Mastic sealing for Conford, from a contractor working since 2005. Fully insured and CHAS accredited.
- Estate-wide sealant that is simply worn out
- Communal area joints that look neglected
- Repeated reactive repairs to the same buildings
Mastic sealing in Conford
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Mastic sealing in Conford
Treatment starts with a proper look: what has failed, what caused it and whether new sealant will actually solve it. Old mastic is removed entirely, the faces prepared, primer used where the maker specifies it and new sealant tooled in and backing rod used wherever a joint is deep. If you have damaged joints in communal entrances and corridors and occupiers reporting cold air round windows, we can help, whatever the surface. Most enquiries from Conford start with one failed joint and grow into a wider look at the building: we check the joints around it and give you an honest view of what needs doing now and what can wait.
Rural conversions near places like Conford often set modern frames into older stone, flint or brick. Perimeter mastic there has to grip an uneven face and suit the building’s character.
Work we carry out comes with a 12-month guarantee. Should something we installed fail, speak to us on 01277 525 020 or email drawings and photos and we’ll come back to it.
- Location
- Conford (GU30)
- Wider area
- Hampshire
- Cover
- A 12-month guarantee
- Quotes
- A fixed quote before we start
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Work for main contractors and building owners
Housing associations and managing agents often need work done across blocks and communal areas. Work can be phased so residents and staff keep access throughout, and each stage is agreed with your contact.
Agents, factors and owners’ representatives all follow the same route: send the details, accept a fixed quote, and we carry out and guarantee the work. Keys, access and contacts can be agreed in advance.
More services for Conford
Our process
Where the site stays busy, the work is phased so only one area is out of use at a time. Each section is protected, cleaned back and sealed, then handed back before the next one starts. Jobs in and around smaller places like Conford are normally planned as a single visit, so photos and measurements up front really help. Then the right materials arrive with us.
- We inspect the joints, building by building, and record what has failed and why.
- We send a fixed quote that sets out the joints, the products and the programme.
- The programme is fixed with you, including dates you can pass on to residents or tenants.
- We remove the old mastic completely and clean the joint faces back.
- Deep joints get backing rod, faces are primed if the manufacturer specifies it, then the joint is sealed and tooled.
- Each building is checked on completion and the work carries our 12-month guarantee.
Getting the site ready
- Let us know about inductions and permits
- Tell staff and tenants when we will be in
- Send asbestos survey details if the building is pre-2000
Get a fixed quote
Send details, get a quote, we seal, guaranteed: that’s how every job runs. To take the first step, call the office on 01277 525 020 or email us.
Related advice
Questions about Conford
Is Passfield Industrial Estate, near Conford, within your area?
Yes. Estates, retail parks and business parks around Conford, Passfield Industrial Estate among them, are all within reach. Photos and a short description are enough for a first look.
Do you work for managing agents with blocks near Liphook station?
Yes. Blocks of any size are within what we do. Send the address, photographs of the elevations and your access arrangements, and we’ll give a fixed quote.
Can you seal joints high up on a block?
Access is discussed and agreed before the quote is fixed. Tell us the number of storeys and whether scaffold or other access is planned, and we’ll tell you how we’d approach it.
What guarantee do you give on resealing?
A 12-month guarantee covers our work. It applies to our workmanship rather than damage or problems with the frames.
Can you work to our specification?
Yes. We follow the specification, along with the manufacturer’s installation guidance, and we raise anything unclear before work begins.
How many days will you need on site?
The duration is planned around your programme and the access we are given. We will give you an estimate of time on site when we quote.
Do you supply RAMS and insurance details?
Let us know your requirements: tell us what site paperwork you need (RAMS, insurance certificate, CSCS details) and we will confirm with the quote. We are CHAS accredited and a Constructionline member.
Keeping the joints sound
Cleaning and maintenance staff play a part too. Share these points with them:
- List the paperwork your organisation requires when you send details
- Protect low-level joints in entrances
- Group repairs into a planned programme
- Have the asbestos survey to hand for older buildings
Ask residents or tenants to report draughts or leaks round windows early. Early reports catch failures before damage spreads.
The longer failed joints are left, the more likely the substrate edges break up. Once that happens, repairs come before resealing.
Surface by surface
Planned maintenance
Mastic wears out like any building component; how fast comes down to movement, weather, UV and the product. Regular inspection is the best way to plan resealing.
Tenement and older buildings
Some old mastics in pre-2000 buildings contain asbestos, so we check the asbestos register or survey first. If it’s suspected, work stops until it’s tested.
What we’re called out for in Conford
Previous repairs often sealed new mastic over old. New silicone has nothing to grip on old silicone and the repair soon fails.
These are often picked up first by site or facilities staff:
- Worn sealant at communal door frames
- Draughts at frames across a block
- Complaints coming in block by block
- Patchy repairs in mismatched sealant
For owners of several units at places like Passfield Industrial Estate, which lies north of Conford, one programme can deal with frame and external mastic across the lot.
What your quote should include
- Are they CHAS accredited or on Constructionline?
- Their public liability cover
- Will RAMS and insurance details be available?
- Whether old or failed sealant will be cut out, not overlaid
What sets the cost
We price every job individually. The things that drive the figure:
- Whether the work must be split into stages
- How accessible the joints are
- The site’s rules and procedures
- Joint width, depth and condition
The specified product makes a difference, and so does the preparation. Access, phasing and site rules also count.
What to include in your enquiry
Good information means a firmer quote. When you get in touch, include:
- Any dates the work must fit around
- Drawings or a marked-up plan, if available
- The type of building and who uses it
- Asbestos survey details if the building is older
Tell us about the building, the joints and when you need the work done, and a fixed quote will follow. The easiest way is to phone 01277 525 020 or email us.
Mastic sealing around Conford: points for this area
Conford lies roughly 42 miles out from central London. Commuter-belt towns tend to have plenty of managed blocks near stations and town centres. Conford sits in one of the drier corners of the country, the South East. External mastic still waits for dry faces and the right temperature, and the sunniest, most exposed sides of a building normally need attention first.
Site managers at schools like Liphook Infant School can fit frame mastic into the summer works. Blocks of flats and mixed-use buildings often cluster around stations such as Liphook station, 1.8 miles south-east of Conford, and their window and balcony mastic tends to age at the same rate across a building.
Conford is about 2 miles south-east of Bordon, in Hampshire. We cover commercial sites throughout Conford. Across Hampshire, 723 places are covered, including Conford. Our Portsmouth page has more on work in that area, about 22 miles away.
Commercial sites across GU30 are covered. Close to Conford, our area also takes in Passfield (1 mile north-west), Weavers Down (1 mile south), Liphook (1 mile south-east), Longmoor (2 miles south-west) and Woolmer (2 miles west). Bigger towns within reach include Farnborough (14 miles north), Fleet (13 miles north), Horndean (15 miles south-west), Aldershot (11 miles north), Alton (8 miles north-west) and Petersfield (8 miles south-west).
What’s near Conford
In Conford, that means premises near Bohunt School, among other places. The nearest railway station is Liphook station, about 1.8 miles south-east. A little further out are Chase Community Hospital (1.9 miles north-west). Open spaces near Conford include Wheeler's Down and Deadwater Valley.