Industrial and floor joint sealing in Upton, Hampshire
Need floor joint sealing in Upton? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Dock area joints that have failed first
- Broken arrises where pallet trucks cross
- Sealant pulled out along a truck route
Floor joint sealing for Upton sites
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Floor joint sealing in Upton
We work on warehouse aisles, dock areas, factory floors, retail units and showrooms. Each job is priced from the metres of joint, their condition and the access windows we get and the figure is fixed before work begins. If you have joint fill separating from the concrete and trucks and loads jolting over damaged joints, we can help, on retail and showroom floors, joints along racking aisles and forklift and pallet-truck routes alike. For commercial sealant work in Upton, you deal with one contact from quote to sign-off, for single jobs and planned programmes alike.
Halls, schools and small commercial buildings near places like Upton have movement joints in brick, block and concrete too. They’re easily forgotten until water gets in or an edge breaks.
Guaranteed is the last step of every job. You get a 12-month guarantee on our workmanship, and we explain exactly what that covers when we quote.
- Location
- Upton (SO16)
- Wider area
- Hampshire
- Guarantee
- A 12-month guarantee
- Quote
- A fixed quote before we start
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
On site: what to expect
A typical day starts with protection: tape along each joint edge and covers over finishes, stock and equipment close by. The work itself typically takes a day for smaller units, with bigger warehouse floors programmed over several visits, and our waste is bagged and taken away as we go. Smaller jobs around Upton can be grouped with others nearby, which keeps travel down. A fixed quote is given before anything starts.
- A floor survey records every joint, its edges and what crosses it.
- You receive a fixed quote showing products and phasing.
- Each joint is cut or routed back to clean, sound concrete.
- We extract the dust and prime the faces if the product needs it.
- Filler or sealant is placed to depth and finished flush.
- We hand each phase back when it can take traffic.
Before we start on site
- Have the specification and drawings to hand
- Let us know about inductions and permits
- Point out parking and an unloading spot
Ask for a quote
Quotes are fixed against the scope you send, so the cost is agreed before work starts. To start the process, phone 01277 525 020 or email us.
Read more
Places near Upton
What else we do in Upton
Common questions from Upton clients
Do you take on work at healthcare sites like Princess Anne Hospital?
Yes, provided the work is planned with the site’s estates team. We follow the site’s permits, sign-in and infection-control procedures in every area.
Is Nursling Industrial Estate, near Upton, within your area?
Yes. Our area takes in Upton and its surroundings, with estates and business parks such as Nursling Industrial Estate included. Send details of the unit and the work through our quote form for a quick quote.
Is the floor joint work guaranteed?
Our workmanship carries a 12-month guarantee and the work is covered by public liability insurance.
Can you fill joints where the arrises have spalled?
A filler needs sound edges to grip. If the arrises have spalled, we’ll say they need repair before filling and set out how that affects the job.
Is colour matching possible?
Often, yes. Sealants are made in a wide range of standard colours, and matching to RAL references or nearby finishes is commonly requested. We confirm what’s available for the specified product when we quote.
How long do sealant joints last?
There’s no fixed lifespan: movement, exposure, cleaning, traffic and the product all play a part. Treat them as maintenance items and inspect them regularly.
How long does a typical visit take?
That varies with the scale of the job, but the work typically takes a day for smaller units, with bigger warehouse floors programmed over several visits. For bigger or phased jobs, we will set out a timescale with the quote.
Floor joint sealing around Upton: points for this area
With the shore within about 3 miles, Upton counts as a coastal location. Coastal yards and decks give their joints salt and wet weather to deal with, not just wheels, so it pays to keep them sealed. The 3 miles around Upton take in at least three named trading estates, business parks or retail parks. Sites like these are full of saw-cut floor joints, yard slabs and car park joints.
Estates like Nursling Industrial Estate, 0.8 miles south-west of Upton, combine warehouse slabs, yards and loading bays, all with joints under wheels. Campuses like University of Southampton (to the south-east of Upton) mix old and new buildings, with movement joints wherever they meet. Another example is Crescent Industrial Estate, 0.8 miles to the south-west of Upton, where floors and yards would be done in stages around the occupiers.
Upton is about 2 miles north-west of Regents Park, in Hampshire. Anywhere in SO16, it works the same way: details in, fixed quote out, then sealing and a 12-month guarantee. Upton is one of 723 places in Hampshire on our list.
If you need floor joint sealing in SO16, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. We cover commercial and managed buildings on Upton Lane, Romsey Road and Greenwood Avenue. Sites close to Upton are covered too, including Nursling (1 mile south), Rownhams (1 mile east), Ashfield (1 mile north-west), Toothill (1 mile north) and Hillyfields (1 mile south). A short drive away, we cover Winchester (10 miles north-east), Eastleigh (6 miles east), Fareham (14 miles south-east), Totton (3 miles south-west), Chandler's Ford (4 miles north-east) and Hedge End (8 miles east).
Near you in Upton
In Upton, that means premises near Oaklands Community School and Oasis Academy Lord's Hill. The closest station to Upton is Redbridge station, roughly 2.1 miles south of the centre. Other landmarks nearby include Eling Experience (2.2 miles south) and Princess Anne Hospital (1.8 miles south-east). Open spaces near Upton include Testwood Lakes.
Work for main contractors and building owners
Blocks and communal areas make up much of the work for housing associations and agents. Work can be phased so residents and staff keep access throughout, and each stage is agreed with your contact.
Main contractors use us as their sealant subcontractor, on new build and refurbishment alike. We work to your programme, your specification and your site rules, with CSCS-carded applicators on site.
What sets the cost
Each job is priced on its own details. The things that drive the figure:
- Site requirements such as inductions and permits
- The total length or number of joints
- How much existing material needs removing
- Backing rod, priming and other preparation
Larger quantities, tricky access or phasing all shape the price. So do site requirements such as inductions and permits.
Details that help us quote
However big the job, these details speed things up:
- Whether the building will be occupied during the work
- Approximate linear metres or a joint schedule
- Anything awkward about access or site hours
- Photos of the joints, close up and from further back
Need a figure for a tender or a budget? We will quote against your scope and drawings that you can work with. If you have questions first, call 01277 525 020 or send photos by email.
Why deal with it now?
Tape, or whatever sealant is in the stores cupboard, may look like a fix for a while. None of it is designed for wheel loads, and it normally ends up dragged across the floor. A product chosen for the traffic and movement does the job once. For buildings around smaller places like Upton, water damage can go unnoticed for longer, especially where a building isn’t used daily, which gives a failed joint time to do damage. Resealing early avoids that.
Access often affects the price as much as the sealing: easy-to-reach joints are quicker than those that need equipment to get to. Tell us how the joints are reached and call for a quote.
Why us?
- Joints cleaned back to sound surfaces
- Sealing commercial buildings since 2005
- Our applicators hold CSCS cards
- Clear, fixed quotes
Read what affects the cost or our accreditations.
Site staff or a sealant specialist?
Certain joints really need a specialist: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. A poor seal in places like these tends to cost more to put right later.
Redoing a failed joint typically costs more than getting it right at the outset, because the whole bead must be removed and the faces cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
After the work
Keep the joints in good shape with a few simple steps:
- Remind operators to lift rather than drag
- Tell us about strong cleaning chemicals before we quote
- Walk the main routes and inspect joint lines on a regular cycle
- Expect fillers on young slabs to need a top-up
Walk the main truck routes every few months and look along the joint lines. Watch for filler pulling away from an edge, fresh chipping or grit collecting, and photograph anything that changes.
Treating joints while the arrises are sound keeps the work simple. After the edges go, repairs come into it and that takes longer and closes areas for longer.