
Floor Joint Sealing in Stonehills
Floor joint sealing and filling in warehouses, factories and industrial units in Stonehills and across Hampshire. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.
- Chipped and spalling edges along forklift routes
- A gap opening alongside old joint filler
- Brittle joint filler breaking up
Floor joint sealing across Stonehills
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Floor joint sealing in Stonehills
Concrete floors in warehouses and factories are cut into bays with saw cuts and day joints, and every one of those joints is an exposed edge under hard wheels. We fill or seal them with a product matched to the traffic and the movement so the edges are held up and debris can’t pack in. Most enquiries involve soft sealant dragged out of trafficked joints and joint edges breaking up under truck wheels, across saw-cut induced joints, loading bays and retail and showroom floors. A single leaking joint is often how a building in Stonehills first comes to us: we look at the rest while we’re there and tell you what we find.
Smaller community and commercial buildings around Stonehills have their own movement joints in walls and floors. They tend to be overlooked until something leaks or cracks.
Our workmanship is guaranteed for 12 months. If our installation lets you down in that time, we return and fix it.

- Place
- Stonehills (SO45)
- Wider area
- Hampshire
- Cover
- 12 months on our workmanship
- Quote
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Owners, agents and contractors
Whether you are a managing agent, a property factor or an owner’s representative: send the details, accept a fixed quote, and we carry out and guarantee the work. We can agree access arrangements and keyholder contacts beforehand.
When you manage a building on behalf of an owner, you need clear quotes and clear reporting. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative, plus a 12-month guarantee.
Your questions answered
Can you work at a site such as Ensign Way Business Park, by Stonehills?
Yes. Estates, retail parks and business parks around Stonehills, Ensign Way Business Park among them, are all within reach. Photos and a short description are enough for a first look.
Can you take on a job at a hospital such as Coldeast?
Yes, hospitals are one of the sectors we cover. Each area is agreed with the ward or department and the estates team in advance.
What do you need from us to quote?
A rough joint length, a few photos and a site plan are typically enough for a quick quote. We can visit where that helps, and you can call 01277 525 020 or email the details over to arrange it.
Can you phase floor joint work around operations?
Typically only the zone we are working in has to close. Traffic returns to each zone once it has cured, then we move to the next.
Will you just go over the old sealant?
No. Failed sealant is removed and the faces cleaned back to sound, dry material first, since fresh sealant will not bond reliably to aged material.
Do you repair broken joint edges?
Filling against broken edges doesn’t last. If the arrises have spalled, we’ll say they need repair before filling, so you can decide how to proceed.
Do you use semi-rigid filler or flexible sealant on floor joints?
It depends on the traffic and the movement. Trafficked joints on truck routes usually need a semi-rigid filler to support the edges, while joints that move more take a flexible sealant.
Our process
Before any cutting starts, the area is protected: tape along each joint edge and covers over finishes, stock and equipment close by. The work itself typically takes a day for smaller units, with bigger warehouse floors programmed over several visits, and our waste is bagged and taken away as we go. For work around Stonehills, we aim to finish in one visit, so photographs and measurements up front really help. That way the right products come on the day.
- First, the zones and order of work are agreed with you.
- Any joints with broken edges are flagged before work starts.
- Failed material and debris are removed and the joint cleaned.
- The chosen filler or sealant goes in flush with the slab.
- You get a time for each zone to reopen.
What we need from you
- Clear stock, furniture or equipment away from the joints
- Send asbestos survey details if the building is pre-2000
- Let building users know which areas are affected
Ask for a quote
Photos, drawings or a schedule of the joints and a fixed quote comes back to you. If the job needs a look first, we will arrange a site visit.
Advice
When to call us in Stonehills
Loading bay joints are exposed to wind, wet tyres and bigger temperature swings on top of the heaviest turning movements. They are often the first on a site to break down.
These are often picked up first by site or facilities staff:
- A gap opening alongside old joint filler
- Sealant pulled out along a truck route
- Failing joints at loading bays and dock doors
- Grimy joint lines spoiling a showroom floor
Large sites such as Coldeast, 4.1 miles north-east of Stonehills, have car parks, service roads and long elevations with movement joints in brick and panels.
What your quote should include
- Whether primer will be used where the manufacturer specifies it
- Will CSCS-carded applicators be on site?
- Can the work be phased to keep areas open?
- Whether old or failed sealant will be cut out, not overlaid
What happens if it’s left?
A floor coating laid over open joints soon cracks along the joint lines. The joints have to be filled or sealed as joints before or alongside any coating work. Around Stonehills, it’s better to renew all the failing joints at once. Photos of every joint help us quote for the whole job.
Small jobs and large programmes are priced from the same things: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote and we’ll put a fixed figure on it.
What you get with us
- One phone line for London, the South East and Scotland
- CSCS-carded applicators
- Workmanship guaranteed for 12 months
- Public liability insurance in place
Read how commercial sealant jobs are priced or our accreditations and insurance.
Floors, slabs and movement joints in Stonehills
Stonehills sits close to the coast, within about 1 mile. Coastal yards and decks give their joints salt and wet weather to deal with, not just wheels, which is why split joints are worth sealing before the edges deteriorate. The 3 miles around Stonehills take in at least three named trading estates, business parks or retail parks. Floors, loading bays and yards on sites like these are where floor and movement joints work hardest.
For buildings at a park such as Ensign Way Business Park (2.4 miles north of Stonehills), brick and panel movement joints are easy to forget until one leaks. For a school such as Fawley Infant School, playground and building joints can be done in the holidays.
Stonehills is about 4 miles south-east of Hythe, in Hampshire. Commercial clients in Stonehills use us for work on floor joints, as part of our coverage of Hampshire. Stonehills is one of 723 places we cover in Hampshire for floor joints. Sites around Southampton have their own page, about 7 miles away.
Business premises anywhere in SO45 are within our area. Buildings on Stonehills and Fawley Bypass are within our area. Sites close to Stonehills are covered too, including Ashlett (1 mile north-east), Fawley (1 mile north-west), Sprat's Down (1 mile south), Calshot (1 mile south-east) and Blackfield (1 mile south-west). Further afield, our area takes in Gosport (8 miles east), Eastleigh (10 miles north), Fareham (7 miles east), Totton (10 miles north-west), Chandler's Ford (11 miles north) and Hedge End (7 miles north).
Landmarks near Stonehills
Recent enquiries here include premises near Falcon Hotel and The New Forest Academy. The nearest railway station is Hamble station, about 3.3 miles north of the centre. Other landmarks nearby include Calshot Castle (1.6 miles east) and Coldeast (4.1 miles north-east). The countryside around Stonehills includes Mercury Marshes.
Also near Stonehills
Other services in Stonehills
Quoting for work in Stonehills
These are the things that shape the price:
- Distance, for remote addresses
- Backing rod, priming and other preparation
- The product specified
- How much there is to seal
The specified product makes a difference, as does the preparation each joint needs, such as cutting out, priming or new backing rod. Access, phasing and site requirements come into it too.
What we need to price the job
However big the job, the same details help:
- The site address and postcode
- Access details, including height
- Any specification or named product
- What the building is and how it’s used
The quickest route to a quote is a few photos and the site postcode. Send them through the quote form, or call 01277 525 020 or send details through our quote form to discuss it first.
Should maintenance staff do it?
Putting right a botched joint often costs more than sealing it well at the start, since all of it has to come out and the faces be cleaned back again. That’s why many clients bring in a specialist from the beginning.
There’s also the paperwork. Many sites expect CSCS cards, RAMS and proof of insurance, and our CSCS-carded applicators are used to working under those rules.