The Mastic Doctor team standing beside their branded vans outside an office building
Hampshire · England

Industrial and floor joint sealing in Mockbeggar, Hampshire

Looking for floor joint sealing in Mockbeggar? It’s simple: send details, get a quote, we seal, guaranteed.

  • Joint fill separating from the concrete
  • Sealant pulled out along a truck route
  • Joint edges breaking up under truck wheels
1
Send details
Send the specification, photos or a marked-up plan.
2
Get a quote
A fixed quote for the work, with the scope in writing.
3
We seal
The right sealant, to the right depth, neatly finished.
4
Guaranteed
12-month guarantee on our workmanship.
London, the South East & Scotland
CHAS accredited
Fully insured: £5m PL

Floor joint sealing in Mockbeggar

Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.

Floor joint sealing in Mockbeggar

Sometimes the concrete either side of a joint has already spalled. A filler laid against broken edges has nothing sound to grip, so if the edges need repair before any filling, we’ll say so and explain how it affects the programme. We work on retail and showroom floors, construction joints and forklift and pallet-truck routes, and the usual reasons a site gets in touch are soft sealant dragged out of trafficked joints and joint fill separating from the concrete. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: on jobs in Mockbeggar, preparation and product choice get the time they need.

For a site near Mockbeggar, measurements and photographs up front mean one trip where possible, with the right materials on hand. Note joint widths and the traffic that uses them, and we will take it from there.

We stand by our work with a 12-month guarantee. It covers how we prepared and applied the sealant.

Location
Mockbeggar (BH24)
Wider area
Hampshire
Guarantee
12 months on our workmanship
Quotes
Quoted before any work starts
Phone
01277 525 020
Last updated
3 November 2026
Mastic Doctor team members lined up next to their branded vans outside an office building

Leave it or put it right?

Every jolt over a broken joint passes into the truck, the load and the driver. Wheels and bearings wear faster and loads can shift, adding costs nobody plans for. A filled joint takes most of that out. Halls, stores and units around places like Mockbeggar may not be checked every day, so a failed joint can leak for a while before anyone sees it. Resealing early avoids that.

What a job costs comes down to the quantity of joints, how much old material needs removing and how the joints are reached. Call for a fixed quote once you have the details.

Why clients in Mockbeggar choose us

  • Workmanship guaranteed for 12 months
  • Old sealant cut out, never sealed over
  • CHAS accredited contractor
  • Specification-led, product-correct work

Take a look at how commercial sealant jobs are priced and how we’re accredited.

Doing it in-house

General builders and handymen seal joints, but it isn’t their main trade. A specialist prepares properly, controls joint depth and picks a product with the right movement class, which is what makes a joint last.

Some joints are best left to specialists: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. Getting these wrong typically costs more in the end than doing them right.

Honest limits

Before quoting, we check that sealant is the right answer. It won’t put right:

  • Broken concrete either side of the joint
  • Cracks across panels caused by settlement or overload
  • A floor that is out of level for the racking or trucks

Not sure which it is? You can give us a call on 01277 525 020 or send details through our quote form and we will tell you honestly.

What we seal

  • Loading bays
  • Construction joints
  • Saw-cut induced joints
  • Forklift and pallet-truck routes
  • Retail and showroom floors
  • Joints along racking aisles

Where floor joints take the most wear near Mockbeggar

Two named trading, business or retail sites lie within about 3 miles of Mockbeggar. Their warehouses, yards and car parks are exactly where joints take the most punishment. Mockbeggar is in the South East, one of the UK’s drier regions. Even so, yard and car park joints are only sealed when they’re dry and clean, and gritting in cold spells finds its way into open joints.

A healthcare site such as Fordingbridge Hospital, 2.9 miles to the north of Mockbeggar, depends on car parks, ramps and service yards whose joints take traffic all day. Across sites such as Carvers Industrial Estate (2.9 miles south of Mockbeggar), floor and movement joints can be sealed in phases so units keep working. Office parks like Headlands Business Park, 2.1 miles to the south of Mockbeggar, have decks, ramps and clad elevations whose joints take movement every day.

Mockbeggar is in Hampshire. Across the BH24 postcode area, the process is the same: send details, get a fixed quote, we seal, and the work is guaranteed. Mockbeggar is one of 723 places we cover in Hampshire. There’s a separate page for Southampton, roughly 17 miles from Mockbeggar.

We cover the BH24 postcode districts. Among the streets we cover are Gorley Road and New Road, and sites on any of them can send details for a fixed quote. Close to Mockbeggar, our area also takes in South Gorley (1 mile north), Ibsley (1 mile west), Rockford (1 mile south), Harbridge (1 mile west) and Ellingham (1 mile south-west). Bigger towns within reach include Totton (12 miles east), Lymington (13 miles south-east), Romsey (15 miles north-east), New Milton (10 miles south-east), Ringwood (3 miles south) and Barton on Sea (11 miles south-east).

Local landmarks in Mockbeggar

Locally, jobs take us to sites close to The Old Beams Inn. Nearby you’ll also find Godshill Castle Hill (3.9 miles north) and Fordingbridge Doll Museum (2.8 miles north). The countryside around Mockbeggar includes Linbrook Lake and Blashford Lakes.

Map of Mockbeggar © OpenStreetMap contributors

Cost factors for floor joints

There’s no standard rate for sealant work, since sites vary so much. What we take into account:

  • Joint width, depth and condition
  • The total length or number of joints
  • Site requirements such as inductions and permits
  • Travel to remote or island sites

There’s no price list, since every building and every scope is different. Call for a quote and we’ll price your job on its own details.

What to include in your enquiry

A few photographs plus some basic facts will normally do. It helps to include:

  • Approximate linear metres or a joint schedule
  • Any dates the work must fit around
  • A wide shot and a close-up of the area
  • Whether the building will be occupied during the work

Specifications, drawings and tender packages are welcome with any enquiry, and we will price the work to it. For smaller jobs, photos and a description will do.

Work for main contractors and building owners

CHAS accredited and a Constructionline member, we are straightforward to vet for your supplier list. We are fully insured, and our insurance certificate can go with the quote.

Facilities managers want contractors who arrive with the paperwork sorted. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we’ll confirm with the quote.

From enquiry to sign-off

Our CSCS-carded applicators arrive with the sealants, primers and backing rod the job calls for. Any old material is cut back to clean, sound faces, the manufacturer’s primer is applied where it’s called for, and each bead is tooled to a neat concave finish. Smaller jobs around Mockbeggar can be grouped with others nearby, which keeps travel down. You’ll have a fixed quote before work starts.

  1. A floor survey records every joint, its edges and what crosses it.
  2. You receive a fixed quote showing products and phasing.
  3. Each joint is cut or routed back to clean, sound concrete.
  4. We extract the dust and prime the faces if the product needs it.
  5. Filler or sealant is placed to depth and finished flush.
  6. Zones reopen once cured and the work moves on.

Before we start on site

  • Let us know about inductions and permits
  • Explain the parking and delivery arrangements
  • Tell staff and tenants when we will be in

Getting a fixed quote

Every job follows the same four steps: send details, get a quote, we seal, guaranteed. To take the first step, phone 01277 525 020 or email the details over.

Get a quick quote

Advice

Questions about Mockbeggar

Does your area include sites such as Headlands Business Park, near Mockbeggar?

Yes. Our area takes in Mockbeggar and its surroundings, with estates and business parks such as Headlands Business Park included. Send details of the unit and the work through our quote form for a quick quote.

Is a hospital such as Fordingbridge Hospital somewhere you can work?

Yes. We work in healthcare settings as well as offices and schools. We follow the site’s permits, sign-in and infection-control procedures in every area.

How many days will you need on site?

The duration is planned around your programme and the access we are given. You will have an expected duration with the quote.

When is resealing likely to be due?

Nobody can honestly give a figure in years, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular inspection is the best way to catch problems early.

Is the floor joint work guaranteed?

Our workmanship carries a 12-month guarantee and the work is covered by public liability insurance.

Do you work to architects’ specifications?

Yes. The specification and the manufacturer’s installation guidance are what we work to, and any queries are raised before we start.

Is Mockbeggar in your area?

Yes. Mockbeggar falls within our area, and you can call 01277 525 020 or email us to get started.

Accreditations

Trusted. Accredited. Insured.