Floor Joint Sealing contractors in Matchams
Sealant work in Matchams for main contractors, managing agents and facilities managers: floor joint sealing and filling in warehouses, factories and industrial units, quoted at a fixed price.
- Cracked and crumbling joint fill
- A rough ride across broken joints
- Broken arrises where pallet trucks cross
Floor joint sealing for Matchams sites
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
About our floor joint sealing in Matchams
For sites in Matchams and across Hampshire, the process is short: send details, get a fixed quote, we seal, and the work is guaranteed. A rough length of joint, photos of the worst areas and a site plan let us give a quick quote, or we can arrange a site visit. The enquiries we see most involve brittle joint filler breaking up and a rough ride across broken joints, on construction joints, loading bays and joints along racking aisles. Whoever orders the work in Matchams, the brief is typically the same: a clear scope, tidy work and joints that don’t fail again.
Smaller community and commercial buildings around Matchams have their own movement joints in walls and floors. They tend to be overlooked until something leaks or cracks.
The 12-month guarantee covers our workmanship: preparation, application and finish. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
- Location
- Matchams (BH24)
- Wider area
- Hampshire
- Guarantee
- A 12-month guarantee
- Price
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Quoting for work in Matchams
What shapes the price:
- Distance, for remote addresses
- Phasing around occupants
- The site’s rules and procedures
- How much existing material needs removing
A quote for floor joints depends on quantities, condition and access. Call for a quote.
What we need to price the job
It doesn’t need to be a full survey. A few details are enough to get going:
- Approximate linear metres or a joint schedule
- Asbestos survey details if the building is older
- The postcode of the building
- Any dates the work must fit around
For a fixed quote, call the office on 01277 525 020 or send details through our quote form. You can also send details through our quote form.
Places near Matchams
More services for Matchams
Common questions from Matchams clients
Can you work at a site such as Millstream Trading Estate, by Matchams?
Yes. We cover Matchams and the area around it, including industrial estates, business parks and retail parks such as Millstream Trading Estate. A few photographs and the unit address let us price the work.
Is Matchams off your patch?
No. Small places get the same service as large ones. We work across Greater London and the South East. Good photographs up front let us bring everything on the first visit.
Do your applicators hold CSCS cards?
Yes. Should the site need card details in advance, let us know and we’ll send them with the quote.
Can weather delay the job?
Outside, yes. The joint has to be dry and within the product’s temperature range, so damp, frosty or very cold days can stop external work. Inside work is seldom held up.
What happens if old sealant might contain asbestos?
Managing asbestos is the dutyholder’s responsibility, so we will ask for the register before work on an older building. If anything suspect turns up, we stop until it’s tested.
Do you repair broken joint edges?
Edge condition is recorded when we look at the floor. Damaged edges are flagged up front, so nothing is filled that won’t hold.
How long before trucks can use the joints?
Cure times vary with the product and the conditions. You’ll get a reopening time for each area when we agree the phasing.
Surface by surface
Forklift and pallet-truck routes
Open route joints are hard on equipment and drivers. Filling them gives a smoother run and protects the floor.
Semi-rigid joint fillers
A semi-rigid filler is stiff enough to hold the arrises up when wheels cross. They tolerate little movement so timing matters on newer slabs.
Commercial clients in Matchams
Facilities managers want contractors who arrive with the paperwork sorted. Let us know the documents you need (RAMS, insurance certificate, CSCS details) and we’ll confirm them with the quote.
If you look after buildings for someone else, clear figures and clear communication matter. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative.
How a job runs
When we get to site, we sign in, go through any site induction and check how permits are handled. Everything around the joints gets protected before any cutting starts, and the work typically takes a day or more, depending on the metres of joint and how many zones the floor is split into. Smaller jobs around Matchams can be grouped with others nearby. You will have a fixed quote before work starts.
- A floor survey records every joint, its edges and what crosses it.
- The treatment and the zones are set out in a fixed quote.
- Old fill and packed debris come out until both faces are sound.
- We extract the dust and prime the faces if the product needs it.
- Filler or sealant is placed to depth and finished flush.
- We hand each phase back when it can take traffic.
Before we start on site
- Point out any areas we must not close
- Share the asbestos register for older buildings
- Confirm the product named in the specification
Ask for a quote
Pricing a project or setting a maintenance budget? We will quote against your scope and drawings that you can work with. For a chat about it beforehand, call the office on 01277 525 020 or email drawings and photos.
Read more
Slabs, ramps and loading bays in Matchams
Matchams sits in one of the drier corners of the country, the South East. Even so, yard and car park joints are only sealed when they’re dry and clean, and where de-icing salt is spread in winter, open joints let it in. Matchams has at least three named business or industrial parks inside a 3-mile radius. Their warehouses, yards and car parks are exactly where joints take the most punishment.
For an estate such as St Leonards Hospital, 1.8 miles west of Matchams, the joints in ramps, decks and long building elevations all need attention over time. Another example is Pintail Business Park (2.1 miles north-east of Matchams), where floors and yards would be done in stages around the occupiers.
Matchams is in Hampshire. Matchams sits inside our coverage, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. 723 places across Hampshire fall within our area, Matchams among them. Sites around Southampton have their own page, roughly 20 miles from Matchams.
If you need floor joint sealing in BH24, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. Streets here include Maple Walk, Ash Tree Close and Sycamore Way. Nearby places we also cover include Avon Castle (1 mile north-east), St Ives (1 mile north), St Leonards (1 mile north-west) and Ashley Heath (2 miles north-west) for floor joints. Nearby towns on our patch include Totton (15 miles north-east), Lymington (12 miles east), New Milton (8 miles south-east), Ringwood (3 miles north-east), Barton on Sea (8 miles south-east) and Ashley (9 miles south-east).
What’s near Matchams
In Matchams, that means premises near Avon Heath Country Park. Other landmarks nearby include St Leonard's Hospital (1.7 miles west). Green spaces nearby include St Catherine's Hill and Blashford Lakes.
Common problems we fix in Matchams
An ageing filler or sealant can go brittle and split especially under daily scrubbing and traffic. At that point it neither holds the edges nor keeps debris out.
Any of the following is a good reason to get the joints checked over:
- Sealant pulled out along a truck route
- Joint edges breaking up under truck wheels
- Joint fill separating from the concrete
- Unfilled floor joints collecting dirt and grit
If you manage units on an estate such as Millstream Trading Estate, 2 miles north-east of Matchams, the floor joints under forklifts and pallet trucks and the slab joints in the yard are the ones to watch.
Questions to ask before you book
- How joint depth will be controlled
- Whether old or failed sealant will be cut out, not overlaid
- Health and safety accreditation such as CHAS
- How they handle RAMS and site documents
When to bring in a specialist
What you see is the finished bead, but most of the work is hidden. Correct depth, the right primer and a sealant matched to the movement are where general trades tend to cut corners.
Paperwork matters too. Many sites expect CSCS cards, RAMS and proof of insurance, and we’ll confirm the paperwork you need with the quote.