The Mastic Doctor team standing beside their branded vans outside an office building
Buckinghamshire · England

Jordans floor joint sealing

Floor joint sealing and filling in warehouses, factories and industrial units across Jordans, carried out by CSCS-carded applicators. CHAS accredited and fully insured.

  • Joint fill separating from the concrete
  • Chipped and spalling edges along forklift routes
  • Untidy open joints in a retail unit
1
Send details
Drawings, photos, a joint schedule or a site visit.
2
Get a quote
One fixed quote covering the agreed scope.
3
We seal
Failed joints cut out, faces prepared, new sealant laid.
4
Guaranteed
Backed by a 12-month workmanship guarantee.
South East, London & Scotland
CHAS & Constructionline
£5m public liability

Floor joint sealing across Jordans

Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.

How the job changes by surface

Saw-cut induced joints

A sawn joint left open soon packs with debris and chips at the edges. Filling them early keeps them tidy and protects the edges.

Isolation joints at walls and columns

Perimeter and column joints get forgotten and fill up with dirt. We record them with the rest of the floor joints.

Floor joint sealing for commercial buildings in Jordans

Across Jordans and the rest of Buckinghamshire, it runs the same way: send details, get a fixed quote, we seal, and the work is guaranteed. Approximate joint lengths, a few photographs and a floor plan are enough for a quick quote and a visit can be arranged where that is easier. We work on loading bays, joints along racking aisles and retail and showroom floors, and the usual reasons a site gets in touch are trucks and loads jolting over damaged joints and failing joints at loading bays and dock doors. For commercial sealant work in Jordans, you deal with one contact from quote to sign-off, for single jobs and planned programmes alike.

Jobs around smaller places like Jordans are planned so the whole job is done in one visit. Tell us the joint widths if you can, and what drives or walks over them.

A 12-month guarantee applies to all our work in Buckinghamshire. Should something we installed fail, call the office on 01277 525 020 or email us and we will come back to it.

Mastic Doctor team members lined up next to their branded vans outside an office building
Where
Jordans (HP9)
Wider area
Buckinghamshire
Cover
A 12-month guarantee
Price
Quoted before any work starts
Phone
01277 525 020
Page updated
3 November 2026

What we can’t put right

We seal joints; we don’t mend everything behind them. Sealant alone won’t deal with:

  • Cracks across panels caused by settlement or overload
  • Uneven floors that need grinding or levelling
  • Spalled arrises, which need an edge repair first

Not sure which it is? You can call the office on 01277 525 020 or email us and we’ll tell you honestly.

Joints and surfaces we work on

  • Forklift and pallet-truck routes
  • Construction joints
  • Loading bays
  • Saw-cut induced joints
  • Joints along racking aisles
  • Retail and showroom floors

Traffic, movement and joints around Jordans

Central London is about 23 miles from Jordans. Warehousing clusters around the motorways that ring and radiate from London; their floors carry heavy traffic every shift. Rainfall across the South East, Jordans included, is lower than in many parts of the UK. External slab and deck joints still need a dry, clean joint to seal, and winter de-icing salt on car parks and ramps works into any open joint.

Hospitals like Chalfonts and Gerrards Cross Hospital, 1.5 miles east of Jordans, have multi-storey or surface car parks whose joints carry vehicles round the clock.

Jordans is about 2 miles east of Beaconsfield, in Buckinghamshire. We cover Jordans and the rest of Buckinghamshire, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. Jordans is one of 308 places in Buckinghamshire on our list for floor joints. For work in that direction, see our Reading page (20 miles or so).

If you need floor joint sealing in HP9, the process matches everywhere else we work: send details, get a quote, we seal, guaranteed. Streets here include Green West Road, Seer Green Lane and Crutches Lane, and sites on any of them can send details for a fixed quote. Just outside Jordans, we also work in Chalfont St Giles (2 miles north-east), Chalfont St Peter (2 miles east), Chalfont Common (2 miles east), Horn Hill (3 miles east) and Maple Cross (4 miles east). A short drive away, we cover High Wycombe (7 miles west), Chesham (7 miles north), Marlow (8 miles west), Amersham (4 miles north), Princes Risborough (13 miles north-west) and Wendover (12 miles north-west).

Local landmarks in Jordans

Recent enquiries here include premises near British Defence Film Library, The Chalfonts Community College and Jolly Cricketers pub and the streets around them. The nearest railway station is Seer Green & Jordans station, about 0.6 miles south-west. Well-known places in the area include Chalfonts and Gerrards Cross Hospital (1.5 miles east) and Chiltern Open Air Museum (2.8 miles north-east). Open spaces near Jordans include Long Grove Wood and Pynesfield Lake.

Map of Jordans © OpenStreetMap contributors

Questions about Jordans

Is Jordans too small for you to travel to?

No. Small places get the same service as large ones. London and every South East county are within our area. Good photographs up front let us bring everything on the first visit.

Can you work on a hospital site such as Chalfonts and Gerrards Cross Hospital?

Yes. Healthcare sites are among the places we work. Each area is agreed with the ward or department and the estates team in advance.

Are you CHAS accredited?

Yes. We are CHAS accredited and a Constructionline member.

Which sealant will you use?

A specification, where there is one, decides it. Without one, the joint decides: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.

Are you fully insured?

Yes. We are fully insured, including public liability cover.

Is it normal for joint filler to separate?

Young concrete carries on shrinking for a long time and a stiff filler can separate down one side. It is usually dealt with by topping up.

Do you use semi-rigid filler or flexible sealant on floor joints?

It depends on the traffic and the movement. Trafficked joints on truck routes normally need a semi-rigid filler to support the edges, while joints that move more take a flexible sealant.

On site: what to expect

In a busy building, we agree a sequence with your contact so the disruption stays in one area at once. Each area is protected, prepared and sealed before the next one starts. For work around Jordans, we aim to finish in one visit, so we ask for photographs and rough sizes first. Then the right materials arrive with us.

  1. A floor survey records every joint, its edges and what crosses it.
  2. The treatment and the zones are set out in a fixed quote.
  3. Old fill and packed debris come out until both faces are sound.
  4. We extract the dust and prime the faces if the product needs it.
  5. Filler or sealant is placed to depth and finished flush.
  6. Zones reopen once cured and the work moves on.

What we need from you

  • Point out any areas we must not close
  • Tell staff and tenants when we will be in
  • Tell us what induction or permit system the site runs

Getting a fixed quote

Send us photographs, drawings or a joint schedule and a fixed quote comes back to you. Where a site visit makes more sense, we’ll arrange one.

Get a quick quote

Advice

Doing it in-house

Paperwork matters too. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and we will confirm the paperwork you need with the quote.

Some joints are best left to specialists: for example fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. A poor seal in places like these tends to cost more to put right later.

What we’re called out for in Jordans

Unfilled joints soon pack with grit, shrink-wrap scraps and pallet splinters. Packed debris acts like a wedge every time a wheel crosses, speeding up the damage.

Any of the following is a good reason to get the joints checked over:

  • Filler that has parted from one face
  • Saw-cut joints left open and packed with grit
  • Scruffy, dirty joint lines on a shop or showroom floor
  • Chipped and spalling edges along forklift routes

Schools like Jordans School often have long brick elevations with movement joints that age quietly.

What your quote should include

  • Which product they’ll use, and why it suits the joint
  • What site paperwork they can supply
  • Health and safety accreditation such as CHAS
  • What the guarantee covers, and for how long

How to choose a sealant contractor

For managing agents and facilities managers

Hospitality, education, healthcare, office and retail clients book us directly too. The work is planned around how the building runs, so guests, pupils, patients or staff are disturbed as little as possible.

For main contractors, we work as the sealant subcontractor. Programme, specification and site rules come first.

Accreditations

Trusted. Accredited. Insured.