The Mastic Doctor team standing beside their branded vans outside an office building
Buckinghamshire · England

Ickford floor joint sealing

We carry out floor joint sealing and filling in warehouses, factories and industrial units in Ickford. Send details for a fixed quote.

  • Filler that has parted from one face
  • Drivers complaining about joints on a route
  • Soft sealant dragged out of trafficked joints
1
Send details
Drawings, photos, a joint schedule or a site visit.
2
Get a quote
A fixed price, with what’s included set out clearly.
3
We seal
Prepared joints, the specified product, a tidy finish.
4
Guaranteed
Signed off, with 12 months’ guarantee.
South East, London & Scotland
CHAS & Constructionline
Fully insured: £5m PL

Floor joint sealing across Ickford

Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.

Floor joint sealing in Ickford, done properly

Few warehouses can shut a whole floor while joints are done, so we phase the work aisle by aisle or bay by bay. Share your site hours and access windows and the programme is built around them so the rest of the operation keeps going. If you are dealing with dock area joints that have failed first and unfilled floor joints collecting dirt and grit, we can put it right, on construction joints, retail and showroom floors and loading bays alike. Whoever orders the work in Ickford, the brief is typically the same: a fixed quote, no surprises on site and a 12-month guarantee behind the result.

Smaller community and commercial buildings around Ickford have their own movement joints in walls and floors. They tend to be overlooked until something leaks or cracks.

Every job we finish is backed by a 12-month workmanship guarantee. If a joint we sealed fails because of how it was installed, we come back and put it right.

Place
Ickford (HP18)
Wider area
Buckinghamshire
Cover
12 months on our workmanship
Price
Fixed quote, scope in writing
Call
01277 525 020
Last updated
3 November 2026
The Mastic Doctor team beside their liveried vans in front of an office building

From enquiry to sign-off

Tell us your site hours and access windows and we’ll plan around them. While we are working, the area stays contained and tidy, and your contact hears from us before we move to the next area. Rural sites near Ickford may need directions, gate codes or a contact on site. Send that with the details and we will confirm the plan with the quote.

  1. We walk the floor and mark up joint widths, edge damage and traffic routes.
  2. You receive a fixed quote showing products and phasing.
  3. Old fill and packed debris come out until both faces are sound.
  4. Dust is vacuumed out and primer applied where specified.
  5. Filler or sealant is placed to depth and finished flush.
  6. We hand each phase back when it can take traffic.

What we need from you

  • Point out parking and an unloading spot
  • Share the asbestos register for older buildings
  • Tell us your opening times and when work is allowed

Get a fixed quote

Pricing a project or setting a maintenance budget? Send the scope and any drawings, and we’ll return a fixed quote you can plan around. If you have questions first, call 01277 525 020 or send details through our quote form.

Get a quick quote

Advice

What happens if it’s left?

Not every joint needs stripping out completely. If old material is sound on one face and only a fine gap has opened, it may not all have to come out and the quote shows which approach suits each run. One visit to deal with every failing joint makes more sense than several trips to a place like Ickford, rather than one at a time. Send photos of each area and we will quote for the lot.

The price depends on the quantity of joints, what has to come out first and the access. Call for a quote when you are ready.

Why us?

  • Health and safety: CHAS accredited
  • Commercial sealant work since 2005
  • Products installed to the manufacturer’s instructions
  • 12-month guarantee on workmanship

Read our cost guide and our accreditations and insurance.

Common questions from Ickford clients

Is a smaller place like Ickford outside your area?

Not at all: smaller places are covered as well as towns. Our area covers London and the South East counties. Send photographs and a list of what needs doing, and we’ll plan the job to need as few trips as possible.

Do you cover business parks and estates near Ickford, such as Camp Industrial Estate?

Yes, sites like Camp Industrial Estate are within our area, along with the rest of Ickford. To start, just ring 01277 525 020 or use the quote form with the unit, the joints involved and your access times.

How do we get a quote for floor joints?

Send details through our quote form or by email and tell us what runs on the floor. We then send a fixed quote with the product and phasing set out.

Do you have public liability insurance?

Yes. Mastic Doctor is fully insured, public liability included.

What guarantee do you give on joint filling?

There is a 12-month guarantee on our workmanship, and we hold public liability insurance.

Can you send site paperwork?

Let us know which documents the site needs, such as RAMS, an insurance certificate or CSCS details, and we’ll confirm them with the quote.

Can you work to our specification?

Yes. The specification and the manufacturer’s installation guidance are what we work to, and we raise anything unclear before work begins.

Warehouse floors and decks around Ickford

Two named trading, business or retail sites lie within about 3 miles of Ickford. Floors, loading bays and yards on sites like these are where floor and movement joints work hardest. Ickford lies roughly 45 miles out from central London. Distribution warehouses and industrial estates are common around the motorway corridors that serve the capital.

Phasing is what makes joint work possible on busy sites such as Christmas Hill Business Park (2.7 miles south-east of Ickford): one bay, aisle or car park row at a time. Large sites such as Thame Community Hospital (to the east of Ickford) have car parks, service roads and long elevations with movement joints in brick and panels.

Ickford is about 4 miles west of Thame, in Buckinghamshire. Anywhere in HP18, it works the same way: send details, get a fixed quote, we seal, and the work is guaranteed. Our Buckinghamshire coverage takes in 308 places, from busy centres to rural villages. Sites around Oxford have their own page, about 7 miles away.

Commercial sites across HP18 are covered. We cover commercial and managed buildings on Church Road, Golder's Close and Sheldon Road and the roads nearby. Nearby places we also cover include Little Ickford (1 mile south-east), Worminghall (1 mile north-west), Draycott (1 mile south), Shabbington (1 mile east) and Tiddington (1 mile south). A short drive away, we cover Aylesbury (11 miles east), Elmhurst (12 miles north-east), Southcourt (11 miles east), Princes Risborough (10 miles east), Haydon Hill (10 miles north-east) and Turnfurlong (12 miles east).

Local landmarks in Ickford

Around Ickford, our work takes us to commercial buildings near The Royal Oak pub and the streets around them. Well-known places in the area include Thame Community Hospital (4 miles east) and Waterperry Gardens Rural Museum (1.4 miles south-west). The countryside around Ickford includes Bernwood Meadows.

Map of Ickford © OpenStreetMap contributors

What the job involves on each surface

Retail and showroom floors

Polished and coated concrete floors in shops and showrooms show every joint. We aim for a tidy, flush finish that suits the floor and confirm which colours the product comes in.

Flexible floor sealants

Where joints move more, a flexible polyurethane floor sealant is often used. They give less edge support than semi-rigid fillers so they are used where movement matters more than wheel load.

Site staff or a sealant specialist?

For most general trades, sealant is a sideline. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint, which is what makes a joint last.

A short, simple internal joint is often within reach of a maintenance team. The usual problems come from preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.

What affects the price in Ickford

Before we quote, we look at:

  • Access and working height
  • Travel to remote or island sites
  • Specialist products, such as fire-rated or hygienic sealants
  • Removal of failed or old sealant

The specified product makes a difference, and so does the preparation. Access, phasing and site requirements come into it too.

What to include in your enquiry

However big the job, these details speed things up:

  • The postcode of the building
  • The product your specification calls for
  • The type of building and who uses it
  • Your programme or deadline

Let us know the site, the scope and your timescale, and a fixed quote will follow. To get it moving, ring 01277 525 020 or email the details over.

When to call us in Ickford

A soft, flexible sealant on a forklift route can’t hold the arrises up and the edges fail regardless. The opposite mistake happens as well: a stiff filler in a joint that keeps moving splits or comes away from the sides.

Clients normally get in touch after noticing one or more of the following:

  • Chipped and spalling edges along forklift routes
  • Brittle joint filler breaking up
  • Unfilled floor joints collecting dirt and grit
  • Joint fill separating from the concrete

Schools such as Ickford School have movement joints in their walls and floors that are easy to overlook.

Before you book anyone

  • What the guarantee covers, and for how long
  • Health and safety accreditation such as CHAS
  • What level of public liability insurance do they hold?
  • Can the work be phased to keep areas open?

Our contractor checklist

Accreditations

Trusted. Accredited. Insured.