Floor Joint Sealing in Hundred Acres
Sealant work in Hundred Acres for main contractors, managing agents and facilities managers: floor joint sealing and filling in warehouses, factories and industrial units, quoted at a fixed price.
- Saw-cut joints left open and packed with grit
- Chipped and spalling edges along forklift routes
- Drivers complaining about joints on a route
Floor joint sealing for Hundred Acres sites
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
How we handle floor joint sealing in Hundred Acres
Some joints reach us with their edges already broken. Filling against a crumbled arris won’t hold for long, so we’ll tell you if the joint edges need repairing first and leave that decision with you. We work on construction joints, retail and showroom floors and forklift and pallet-truck routes, and what we’re called in for most is failing joints at loading bays and dock doors and a gap opening alongside old joint filler. A single leaking joint is often how a building in Hundred Acres first comes to us: we look at the rest while we’re there and tell you what we find.
Halls, schools and small commercial buildings near places like Hundred Acres have movement joints in brick, block and concrete too. They’re easily forgotten until water gets in or an edge breaks.
Building owners and contractors get the same cover: twelve months on the work we carried out. Faults in the structure, damage and other trades’ work fall outside it, and we say so plainly.
- Where
- Hundred Acres (PO17)
- Wider area
- Hampshire
- Guarantee
- A 12-month guarantee
- Price
- A fixed quote before we start
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
Our process
We schedule the visit to fit the site hours and access windows you give us. On the day, the work area is kept contained and tidy, and your contact hears from us before we move to the next area. Jobs in and around smaller places like Hundred Acres are typically planned as a single visit, so photos and measurements up front really help. That way the right products come on the day.
- We walk the floor and mark up joint widths, edge damage and traffic routes.
- You receive a fixed quote showing products and phasing.
- Old fill and packed debris come out until both faces are sound.
- Dust is vacuumed out and primer applied where specified.
- The joint is filled to its specified depth and trimmed level.
- We hand each phase back when it can take traffic.
Getting the site ready
- Make sure the joints can be reached
- Let us know about inductions and permits
- Share your working hours and any access restrictions
Get a fixed quote
To get a fixed quote, ring 01277 525 020 or email us. Our quote form is another easy route.
Advice
Places near Hundred Acres
Also in Hundred Acres
Traffic, movement and joints around Hundred Acres
Hundred Acres is in the South East, one of the UK’s drier regions. External slab and deck joints still need a dry, clean joint to seal, and gritting in cold spells finds its way into open joints. At least three named trading, business or retail sites lie within about 3 miles of Hundred Acres. Sites like these are full of saw-cut floor joints, yard slabs and car park joints.
Another example is Spurlings Industrial Estate, which lies south of Hundred Acres, where floors and yards would be done in stages around the occupiers. For a centre such as Broadcut Retail Park, 2.9 miles south of Hundred Acres, the service yard and car park joints typically need attention first.
Hundred Acres is about 4 miles north-east of Fareham, in Hampshire. We cover Hundred Acres, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. Our Hampshire coverage takes in 723 places, from busy centres to rural villages. Portsmouth is covered too, around 7 miles from Hundred Acres.
If you need floor joint sealing in PO17, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. Among the streets we cover are Hundred Acres Road and Southwick Road. If your building is just outside Hundred Acres, we cover North Boarhunt (1 mile south-east), Wickham Common (1 mile south-west), Crockerhill (2 miles south-west), Welborne (2 miles south-west) and Boarhunt (2 miles south). Bigger towns within reach include Winchester (13 miles north-west), Gosport (7 miles south), Havant (8 miles east), Eastleigh (9 miles north-west), Fareham (4 miles south-west) and Horndean (6 miles east).
What’s near Hundred Acres
For rail, the closest station is Fareham station, about 3.5 miles south-west of the centre. Nearby you will also find Fareham Shopping Centre (3.3 miles south) and Portchester Castle (4.7 miles south-east). The countryside around Hundred Acres includes St Clair's Meadow and Portsdown Hill.
FAQs: Hundred Acres
Do you cover business parks and estates near Hundred Acres, such as Knowle Village Business Park?
Yes. We cover Hundred Acres and the area around it, including industrial estates, business parks and retail parks such as Knowle Village Business Park. A few photographs and the unit address let us price the work.
Can you take on a job at a hospital such as Knowle Hospital?
Yes. We work in healthcare settings as well as offices and schools. Work is phased so departments keep running, under the site’s own rules.
Can weather delay the job?
It can, for external work. Sealant won’t bond properly to a wet or frosty joint, so external work may be moved if conditions aren’t right. Internal work is far less affected.
How long does a job like this take?
That varies with the scale of the job, though a typical visit typically takes a day for smaller units, with bigger warehouse floors programmed over several visits. Larger or phased jobs take longer, and we will give you a timescale with the quote.
Can the sealant be colour-matched?
That depends on the product specified. Some ranges offer many colours, others very few, so the available colours are confirmed with the quote.
Do you cover Hundred Acres?
Yes. We cover Hundred Acres, and the simplest way to start is to speak to us on 01277 525 020 or use the quote form.
Do your applicators hold CSCS cards?
Yes. Our applicators hold CSCS cards.
Keeping the joints sound
Sealant joints are maintenance items, and their life depends on movement, exposure, cleaning and use. We suggest:
- Mention any aggressive cleaning regime at quote stage
- Check joint lines on busy aisles regularly
- Stop forks and pallets being dragged across joints
- Start with the dock areas, where joints fail soonest
Ask drivers not to drag forks or pallets along the floor. Steel tines will mark a good joint over time.
Joint damage starts slowly and then speeds up. Each chip makes the drop deeper and the next impact harder, so it pays to act at the first signs.
Doing it in-house
Using site staff can make sense for a small touch-up, but larger jobs are different: a specialist brings efficiency, a consistent finish and a 12-month guarantee.
A short, simple internal joint is often within reach of a maintenance team. The usual problems come from preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
For managing agents and facilities managers
When you manage a building on behalf of an owner, clear figures and clear communication matter. You get a fixed quote, an agreed scope and a walk round at the end.
FMs need a contractor who is easy to get on site. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we will confirm with the quote.
Signs you need floor joint sealing in Hundred Acres
Floor joints collect dust, oil, curing compound and cleaning residue. Without cutting back to sound, clean concrete, the new material simply lifts out.
If one of these sounds familiar, it’s time for a closer look:
- Filler that has parted from one face
- Failing joints at loading bays and dock doors
- Chipped and spalling edges along forklift routes
- A rough ride across broken joints
Business parks such as Knowle Village Business Park, 2.5 miles south-west of Hundred Acres, have car parks, paved areas and long brick and panel elevations, all with movement joints.
Questions to ask before you book
- Will CSCS-carded applicators be on site?
- Their public liability cover
- Whether old or failed sealant will be cut out, not overlaid
- Which product they’ll use, and why it suits the joint
Different surfaces, different methods
Forklift and pallet-truck routes
Trucks running over open joints wear wheels and shake loads. Filling them gives a smoother run and saves the edges.
Semi-rigid joint fillers
If a joint is still opening, a semi-rigid filler may part from one face. A later top-up typically puts that right, and we will explain it when we quote.