Felsted floor joint sealing
Floor joint sealing and filling in warehouses, factories and industrial units in Felsted. CHAS accredited and fully insured, with a 12-month guarantee.
- Dock area joints that have failed first
- A gap opening alongside old joint filler
- Soft sealant dragged out of trafficked joints
Need floor joint sealing in Felsted?
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Floor joint sealing around Felsted: how the place shapes the job
Felsted has at least three named business or industrial parks inside a 3-mile radius. Floors, loading bays and yards on sites like these are where floor and movement joints work hardest. Felsted is about 34 miles from central London. Distribution warehouses and industrial estates are common around the motorway corridors that serve the capital.
Schools such as Felsted Primary School have movement joints in their walls and floors that are easy to overlook. If you manage units on an estate such as Martels Industrial Estate, 2.5 miles west of Felsted, the floor joints under forklifts and pallet trucks and the slab joints in the yard are the ones to watch.
Felsted is about 6 miles west of Braintree, in Essex. Felsted sits inside our coverage, with the same fixed quotes and 12-month guarantee as everywhere else. Felsted is one of 644 places we cover in Essex. We also cover London, around 34 miles from Felsted.
Business premises anywhere in CM6 are within our area. If your site is on Station Road, Braintree Road and Chelmsford Road or close by, send details and we will quote for floor joints. We also cover Causeway End (1 mile south), Watch House Green (1 mile north-east), Little Dunmow (1 mile west), Bannister Green (1 mile east) and Brookstreet (1 mile west) for floor joints. Further afield, our area takes in Chelmsford (9 miles south), Braintree (6 miles east), Harlow (15 miles south-west), Maldon (14 miles south-east), Witham (9 miles south-east) and Saffron Walden (14 miles north-west).
Local landmarks in Felsted
Around Felsted, our work takes us to commercial buildings near The Chequers pub. Nearby you’ll also find Little Easton Moat (4.9 miles north-west) and Braintree Community Hospital (4.6 miles east). For a walk, there’s Phyllis Currie Nature Reserve.
About our floor joint sealing in Felsted
Forklifts and pallet trucks are hard on open joints. Every pass chips at the bare concrete edge until a crisp saw cut becomes a wide, broken groove. A properly filled joint carries the wheel over and protects both arrises, which is kinder to trucks, loads and operators. If you are dealing with old filler gone hard, cracked or loose and sealant pulled out along a truck route, we can put it right, whatever the surface. A single leaking joint is often how a building in Felsted first comes to us: we look at the rest while we’re there and tell you what we find.
Halls, schools and small commercial buildings near places like Felsted have movement joints in brick, block and concrete too. They tend to be overlooked until something leaks or cracks.
A 12-month guarantee applies to all our work. If an installation problem shows up, give us a call on 01277 525 020 or email the details over and we will arrange a return visit.
- Place
- Felsted (CM6)
- Wider area
- Essex
- Cover
- 12 months on every job
- Quote
- A fixed quote before we start
- Call
- 01277 525 020
- Updated
- 3 November 2026
Places near Felsted
What else we do in Felsted
Common problems we fix in Felsted
Soft sealant in a heavily trafficked joint gives the edges little support, so the concrete still breaks beside it. It can go the other way too: a stiff filler in a joint that keeps moving splits or comes away from the sides.
Clients normally get in touch after noticing one or more of the following:
- Brittle joint filler breaking up
- Filler that has parted from one face
- Flexible sealant torn out by wheels
- Joint edges breaking up under truck wheels
Another example is Oak Industrial Estate (2.7 miles west of Felsted), where floors and yards would be done in stages around the occupiers.
Before you book anyone
- Proof of insurance
- Health and safety accreditation such as CHAS
- Do they follow the manufacturer’s priming guidance?
- Who will actually carry out the work
What the job involves on each surface
Construction joints
Where a day joint crosses a truck route, its edges take heavy punishment. We look at how much they are moving before choosing the treatment.
Flexible floor sealants
Polyurethane floor sealants are available in a range of colours, and we’ll confirm what the specified product offers.
Building owners, agents and FMs in Felsted
Agents, factors and owners’ representatives all follow the same route: send details, get a fixed quote, we seal, guaranteed. We can agree access arrangements and keyholder contacts beforehand.
We work for building owners and managing agents on everything from one building to a spread of sites. One quote can cover more than one site, so there’s one set of paperwork to deal with.
Site staff or a sealant specialist?
General builders and handymen seal joints, but it isn’t their main trade. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint, which is what makes a joint last.
Some joints are best left to specialists: for example fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. A poor seal in places like these tends to cost more to put right later.
How a job runs
We follow your site rules from the start: signing in, inductions and any permit to work. Once we’re cleared to begin, the joints are worked through in the order agreed with your site contact, and each area is checked before we leave it. If others near Felsted need work, visits can be combined. You’ll have a fixed quote before work starts.
- Each area is assessed for joint width, arris damage and the wheels that cross it.
- A fixed quote follows, listing the treatment for each area and the order of work.
- Old filler, debris and contamination are cut or routed out back to clean concrete.
- Dust is extracted from the joint and primer applied where the manufacturer specifies it.
- The chosen product is placed to its specified depth and trimmed level with the floor.
- Each phase reopens when the product is ready for wheels, then we start the next.
Preparing the site
- Tell us what induction or permit system the site runs
- For older buildings, check the asbestos register before work
- Tell us which areas need to stay in use
Request a quote
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. To take the first step, give us a call on 01277 525 020 or email drawings and photos.
Related advice
Questions we’re asked in Felsted
Is a smaller place like Felsted outside your area?
No. Small places get the same service as large ones. We work across Greater London and the South East. Send photos and a list of what needs doing, and we will plan the job to need as few trips as possible.
Can you work at a site such as Martels Industrial Estate, by Felsted?
Yes. Estates, retail parks and business parks around Felsted, Martels Industrial Estate among them, are all within reach. To start, just phone 01277 525 020 or use the quote form with the unit, the joints involved and your access times.
How soon can traffic go back on the floor?
Each product has its own cure time and cooler floors take longer. We plan the phasing so that waiting time fits your operation.
Are you insured?
Yes. Mastic Doctor is fully insured, public liability included.
Do you offer coloured sealant?
In many cases, yes. Sealants are made in a wide range of standard colours, and matching to RAL references or nearby finishes is commonly requested. We will confirm the colours available for the specified product.
Will we need to close the floor?
Normally only the zone we are working in has to close. Each zone reopens when the product can take traffic, then we move to the next.
Does the weather affect the work?
It can, when the joints are outside. Wet joints and cold, damp or frosty conditions stop the sealant bonding properly, so we watch the forecast and rearrange outside work if we have to. Indoors, the weather is rarely a problem.
What we can’t put right
Before quoting, we check that sealant is the right answer. It won’t put right:
- Damaged or worn floor coatings and screeds
- A floor that is out of level for the racking or trucks
- Spalled arrises, which need an edge repair first
If in doubt, ring 01277 525 020 or email drawings and photos and we will say what we think before you book.
Joints and surfaces we work on
- Loading bays
- Forklift and pallet-truck routes
- Saw-cut induced joints
- Retail and showroom floors
- Joints along racking aisles
- Construction joints