Industrial and floor joint sealing in Farnborough, West Berkshire
Floor joint sealing and filling in warehouses, factories and industrial units in Farnborough. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.
- Joint fill separating from the concrete
- Soft sealant dragged out of trafficked joints
- Trucks and loads jolting over damaged joints
Need floor joint sealing in Farnborough?
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Where floor joints take the most wear near Farnborough
Farnborough sits in one of the drier corners of the country, the South East. External joints still wait for dry conditions, and gritting in cold spells finds its way into open joints. At about 55 miles from central London, Farnborough is within reach of the capital. The South East has large numbers of industrial estates and warehouses along the motorway corridors, and their floor joints take forklift and pallet-truck traffic all day.
For floors and slabs around Farnborough, the product is chosen for the traffic and the movement at each joint. Around Farnborough, open joints collect water and debris, and the arrises are the next to go.
Farnborough is about 4 miles south-east of Wantage, in West Berkshire. Farnborough sits inside our coverage, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. Our West Berkshire coverage takes in 140 places. Sites around Oxford have their own page, about 16 miles away.
Commercial sites across OX12 are covered. Just outside Farnborough, we also work in Catmore (2 miles south-east), Brightwalton (2 miles south), Brightwalton Green (2 miles south), West Ilsley (3 miles east) and Stanmore (3 miles south-east). A short drive away, we cover Newbury (10 miles south), Thatcham (10 miles south-east), Speenhamland (9 miles south), Hungerford (10 miles south-west), Little Heath (15 miles east) and Calcot (15 miles south-east).
Around Farnborough
Well-known places in the area include Atlas Computer Laboratory (3.8 miles north-east). Green spaces nearby include Chain Hill and Letcombe Valley.
Floor joint sealing for commercial buildings in Farnborough
Few warehouses can shut a whole floor while joints are done, so the work is split into zones and treated one area at a time. Tell us your site hours and access windows and we’ll plan around them so the rest of the operation keeps going. We work on saw-cut induced joints, joints along racking aisles and forklift and pallet-truck routes, and the failures we are asked to look at most are filler that has parted from one face and untidy open joints in a retail unit. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: in Farnborough, that means joint design, primers and backing rod as standard.
Around smaller places such as Farnborough, floor joints are often in barns and farm buildings turned into workshops, stores and offices. Whether it’s a farm store turned workshop or a storage unit, the joints need a product that suits the traffic.
We sign every job off with a 12-month guarantee. The promise is simple: if the work we did fails within twelve months, we return to fix it.
- Where
- Farnborough (OX12)
- Region
- West Berkshire
- Guarantee
- A 12-month guarantee
- Quote
- Quoted before any work starts
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
For managing agents and facilities managers
We work for building owners and managing agents on everything from one building to a spread of sites around Farnborough. One quote can cover more than one site, so there’s one set of paperwork to deal with.
Main contractors use us as their sealant subcontractor. Programme, specification and site rules come first.
Also near Farnborough
What else we do in Farnborough
Surface by surface
Forklift and pallet-truck routes
A route joint has to take repeated wheel strikes without breaking up. Wheel type and traffic level steer the product choice.
Flexible floor sealants
A flexible sealant suits perimeter and movement joints away from the heaviest traffic. Closed-cell backing rod goes in first, keeping the bead shallow and gripping only the two faces.
Your questions answered
Is Farnborough too small for you to travel to?
No. Small places get the same service as large ones. London and every South East county are within our area. Where we can, we group nearby jobs to make the most of each trip.
Which documents can you supply for work in Farnborough?
RAMS, insurance certificate, CSCS details: list what the site needs and we will confirm it with the quote. We are CHAS accredited and a Constructionline member, with £5m public liability insurance and CSCS-carded applicators.
How do you choose the sealant?
Where there’s a specification, we use the product it names. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.
Are you fully insured?
Yes. Mastic Doctor is fully insured, public liability included.
Can the warehouse stay open while you work?
The work is phased. We work aisle by aisle or zone by zone so the rest of the floor stays in use around the site hours and access windows you give us.
Do you seal on top of existing sealant?
No, never. Overlaying old sealant is a frequent cause of early failure, so everything comes out first.
When is resealing likely to be due?
There’s no fixed lifespan: movement, exposure, cleaning, traffic and the product all play a part. Sealant joints are maintenance items, so inspect them regularly.
After the work
Regular inspection catches problems early. In particular:
- Keep trucks off new joints until we say they’re ready
- Allow for topping up joints as a new slab settles
- Ask drivers not to drag forks or pallets
- Mention any aggressive cleaning regime at quote stage
Walk the main truck routes every few months and look along the joint lines. Watch for filler pulling away from an edge, fresh chipping or grit collecting and keep photos so changes are easy to compare.
Every day an open joint stays full of grit, the edges take more punishment. Getting it filled stops the damage before it becomes a repair.
Cost factors for floor joints
A fixed quote reflects the actual work. It allows for:
- Joint width, depth and condition
- Whether the work must be split into stages
- How much existing material needs removing
- Access and working height
No two sites price the same: the joint sizes, the specified product, access and working hours each have a bearing. Send the details and a fixed figure follows.
What to include in your enquiry
Whether it’s one area or a whole building, the same details help:
- The site address and postcode
- Whether an asbestos survey exists
- Any dates the work must fit around
- The type of building and who uses it
Need a figure for a tender or a budget? Send the scope and any drawings, and we’ll return a fixed quote that you can work with. For a chat about it beforehand, call the office on 01277 525 020 or use the quote form.
When to bring in a specialist
For most general trades, sealant is a sideline. A specialist prepares properly, controls joint depth and picks a product with the right movement class.
Site maintenance staff can often handle a short internal joint. The usual problems come from preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
From enquiry to sign-off
We follow your site rules from the start: signing in, inductions and any permit to work. With the paperwork done, we take the joints in the sequence agreed with you. If others near Farnborough need work, visits can be combined, which keeps travel down. You will have a fixed quote before work starts.
- We look at joint widths, edge condition and the traffic on each route.
- You get a fixed quote with the product and the phasing set out.
- We remove failed material and packed debris until sound concrete is exposed on both faces.
- We vacuum each run and prime it if the chosen product requires a primer.
- We fill each joint to depth and finish it flush so wheels roll straight across.
- Each phase reopens when the product is ready for wheels, then we start the next.
What we need from you
- For older buildings, check the asbestos register before work
- Confirm the product named in the specification
- Tell us which areas need to stay in use
Getting a fixed quote
Quotes are fixed against the scope you send, so the cost is agreed before work starts. To start the process, phone 01277 525 020 or email drawings and photos.