Industrial and floor joint sealing in Curbridge, Hampshire
Sealant work in Curbridge for main contractors, managing agents and facilities managers: floor joint sealing and filling in warehouses, factories and industrial units, quoted at a fixed price.
- Unfilled floor joints collecting dirt and grit
- A gap opening alongside old joint filler
- Untidy open joints in a retail unit
Floor joint sealing for businesses in Curbridge
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
About our floor joint sealing in Curbridge
Floor joint sealing for us covers warehouse aisles, loading bays, production halls, retail floors and showroom slabs. Each job is priced from the metres of joint, their condition and the access windows we get, and the quote is fixed before we mobilise. We work on retail and showroom floors, saw-cut induced joints and loading bays, and the usual reasons a site gets in touch are soft sealant dragged out of trafficked joints and chipped and spalling edges along forklift routes. A single leaking joint is often how a building in Curbridge first comes to us: we check the joints around it and give you an honest view of what needs doing now and what can wait.
Rural business units around smaller places such as Curbridge often have new slabs laid inside older buildings. Saw-cut and construction joints in those floors need the right filler or sealant for the forklifts and trolleys that use them.
We sign every job off with a 12-month guarantee. The promise is simple: if our work fails within that year, we put it right.
- Where
- Curbridge (SO30)
- Wider area
- Hampshire
- Cover
- A 12-month guarantee
- Price
- A fixed quote before we start
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
What affects the price in Curbridge
There’s no standard rate for sealant work, because every site is different. What we look at:
- The total length or number of joints
- Which sealant the job calls for
- How accessible the joints are
- Whether old sealant has to be cut out first
The price depends on how many linear metres there are, how much old material needs removing and the access. Call for a fixed quote once you have the details.
Sending details for a quote
Diagnosis starts before we arrive. Tell us:
- The type of building and who uses it
- The postcode of the building
- The product your specification calls for
- Drawings or a marked-up plan, if available
Send details, get a quote, we seal, guaranteed: that’s how every job runs. To take the first step, speak to us on 01277 525 020 or email drawings and photos.
Nearby places to Curbridge
Other services in Curbridge
Common questions from Curbridge clients
Is Curbridge too small for you to travel to?
Not at all. Curbridge is within our area. London and every South East county are within our area. Good photographs up front let us bring everything on the first visit.
Do you take on work at healthcare sites like Fareham Community Hospital?
Yes. We work in healthcare settings as well as offices and schools. We follow the site’s permits, sign-in and infection-control procedures in every area.
How long do sealant joints last?
It depends on movement, UV and weather, cleaning, traffic and the product. Sealant joints are maintenance items, so inspect them regularly.
Can weather delay the job?
For external joints, yes. Sealant needs a dry joint and a temperature within the product’s range, so damp, frosty or very cold days can stop external work. Inside work is seldom held up.
What site paperwork can you supply?
Each site asks for different documents, so tell us what you need and we will confirm it when we quote.
How do you deal with asbestos in old sealant?
Asbestos is possible in some older mastics, particularly in buildings from before 2000. We check the asbestos register before cutting out old sealant in an older building, and work stops until any suspect material has been tested. Removing asbestos is a job for asbestos specialists, not us.
Can the sealant be colour-matched?
Often, yes. Sealants are made in a wide range of standard colours, and matching to RAL references or nearby finishes is commonly requested. We confirm what’s available for the specified product when we quote.
Aftercare for building managers
Sealant joints are maintenance items, and their life depends on movement, exposure, cleaning and use. We suggest:
- Let us know what the floor is cleaned with
- Make joint checks part of your floor inspections
- Allow for topping up joints as a new slab settles
- Hold traffic back until the product has cured
Dragged forks and pallets gouge joints and edges alike. Steel tines will mark a good joint over time.
Joint damage starts slowly and then speeds up. Once the first piece is out, wheels drop further and hit harder so early treatment saves a lot of trouble.
What the job involves on each surface
Forklift and pallet-truck routes
A route joint has to take repeated wheel strikes without breaking up. We match the product to the wheel types and the traffic.
Semi-rigid joint fillers
For trafficked warehouse joints, semi-rigid fillers are common. We place them to depth and trim them level with the slab.
When something else is needed
Part of a good diagnosis is knowing where sealant stops. We’ll tell you if the real problem is any of the following:
- Broken concrete either side of the joint
- A failing floor coating, which is a flooring contractor’s job
- A floor that rocks at the joints, which needs a structural fix
Not sure which it is? You can give us a call on 01277 525 020 or email us and we’ll tell you honestly.
Joints and surfaces we work on
- Saw-cut induced joints
- Loading bays
- Forklift and pallet-truck routes
- Joints along racking aisles
- Construction joints
- Retail and showroom floors
Diagnose, treat, sign off
Working in a building that stays open takes some planning. We sign and contain the area we’re in, keep walkways clear and work section by section so the rest of the building stays in use. For a site in Curbridge, we plan so the whole job is done in one go where possible. Photos with rough sizes let us arrive with everything needed.
- We agree the traffic routes and phasing with your site team.
- Any joints with broken edges are flagged before work starts.
- We clear each run back to clean concrete.
- We fill the joints with the agreed product, finished level.
- Each area is handed back when ready for traffic.
Before we start on site
- Point out parking and an unloading spot
- For older buildings, check the asbestos register before work
- Share your working hours and any access restrictions
Ask for a quote
A good quote starts with a clear picture: what’s there, how much of it, how we reach it and what’s specified. Share whatever details you have and we will fill any gaps with a visit.
Read more
For managing agents and facilities managers
When you manage a building on behalf of an owner, you need clear quotes and clear reporting. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative.
For main contractors, we work as the sealant subcontractor. We work to your programme, your specification and your site rules.
Slabs, ramps and loading bays in Curbridge
At about 65 miles from central London, Curbridge is within reach of the capital. Distribution warehouses and industrial estates are common around the motorway corridors that serve the capital; their floors carry heavy traffic every shift. Rainfall across the South East, Curbridge included, is lower than in many parts of the UK. Even so, yard and car park joints are only sealed when they’re dry and clean, and where de-icing salt is spread in winter, open joints let it in.
Across sites such as Solent Business Park, 1.5 miles south of Curbridge, floor and movement joints can be sealed in phases so units keep working. Estates like Bottings Industrial Estate (to the north-west of Curbridge) combine warehouse slabs, yards and loading bays, all with joints under wheels. Hospital campuses such as Fareham Community Hospital, 2.5 miles south-west of Curbridge, grow in stages, leaving movement joints wherever new blocks meet old.
Curbridge is about 3 miles east of Hedge End, in Hampshire. If you’re looking for floor joint sealing in Curbridge, we can help, as we do across Hampshire. Curbridge is one of 723 places in Hampshire on our list. Our Southampton page has more on work in that area, about 7 miles away.
Business premises anywhere in SO30 are within our area. Streets here include Tanners Brook Close, Loddon Close and Oakhanger Close. We also cover Curdridge (1 mile north), Botley (2 miles north-west), Boorley Green (3 miles north-west), Waltham Chase (3 miles north-east) and Durley (3 miles north). Further afield, our area takes in Winchester (11 miles north), Gosport (8 miles south-east), Havant (12 miles east), Eastleigh (6 miles north-west), Fareham (4 miles south-east) and Horndean (10 miles east).
Landmarks near Curbridge
Around Curbridge, our work takes us to commercial buildings near Horse and Jockey pub and the streets around them. The nearest railway station is Botley station, about 1.2 miles north-west of the centre. Nearby you’ll also find St Andrew's Castle (4.6 miles south-west) and Knowle Hospital (2.3 miles south-east). Green spaces nearby include Swanwick Lakes.