Floor Joint Sealing in Colbury
Floor joint sealing and filling in warehouses, factories and industrial units in Colbury. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.
- Flexible sealant torn out by wheels
- A gap opening alongside old joint filler
- Trucks and loads jolting over damaged joints
Floor joint sealing across Colbury
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Floor joint sealing in Colbury, done properly
Few warehouses can shut a whole floor while joints are done, so the work is split into zones and treated one area at a time. Tell us your site hours and access windows and we will plan around them, with goods still moving in the areas we aren’t in. We work on forklift and pallet-truck routes, loading bays and joints along racking aisles, and the usual reasons a site gets in touch are drivers complaining about joints on a route and cracked and crumbling joint fill. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, the work in Colbury is the same: failed joints cut out, faces prepared and the right sealant laid to the right depth.
In and around smaller places like Colbury, the concrete floors we see are often in converted farm buildings, small workshops and storage units. Joints in those slabs take vehicles, trolleys and foot traffic, and need a filler or sealant to match.
The 12-month guarantee is for workmanship rather than wear and tear. Sealant wears with time, and movement, weather, cleaning and use decide how fast, so we spell out the cover before we begin.
- Where
- Colbury (SO40)
- Wider area
- Hampshire
- Cover
- A 12-month guarantee
- Price
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Page updated
- 3 November 2026
When something else is needed
We seal joints; we don’t mend everything behind them. Sealant alone won’t deal with:
- Slab panels that rock or move under load
- Cracks across panels caused by settlement or overload
- A floor that is out of level for the racking or trucks
If in doubt, give us a call on 01277 525 020 or email a schedule or drawings and we’ll say what we think.
Joints and surfaces we work on
- Forklift and pallet-truck routes
- Loading bays
- Retail and showroom floors
- Joints along racking aisles
- Saw-cut induced joints
- Construction joints
From enquiry to sign-off
A typical day starts with protection: masking tape along the joint edges and sheeting over anything nearby. On site, the work normally takes a day or more, depending on the metres of joint and how many zones the floor is split into, and we clear our waste as we work. For work around Colbury, we aim to finish in one visit, so we ask for photographs and rough sizes first. Then the right materials arrive with us.
- Each area is assessed for joint width, arris damage and the wheels that cross it.
- You get a fixed quote with the product and the phasing set out.
- Each joint is cleared of old fill and dirt and taken back to clean, sound edges.
- Dust is extracted from the joint and primer applied where the manufacturer specifies it.
- The chosen product is placed to its specified depth and trimmed level with the floor.
- We tell you when each zone can carry trucks again and move on to the next.
What we need from you
- Send your site hours and access windows
- Share the asbestos register for older buildings
- Confirm the product named in the specification
Getting a fixed quote
If there’s a specification, drawings or a tender package, send it with your enquiry, and we will price against exactly what is specified. For smaller jobs, photographs and a description will do.
Related advice
Why deal with it now?
Painting or coating straight over joints rarely lasts. The joints have to be filled or sealed as joints, whether or not the floor is coated. Older rural buildings around Colbury move with the seasons, and rigid or tired sealant can’t keep up. The right product, sized to the joint, copes much better.
No two sites price the same: joint size, product, access and site hours all play a part. Send the details and a fixed figure follows.
Why choose Mastic Doctor in Colbury
- Fully insured, including public liability cover
- Work carried out by CSCS-carded applicators
- 12-month guarantee on workmanship
- Failed material removed, not covered up
Read what affects the cost and our accreditations.
Floor joint sealing around Colbury: what changes locally
Colbury lies within about 2 miles of the sea. External movement joints in car parks, ramps and yards near the coast take salt and wind-driven rain on top of traffic, which is why split joints are worth sealing before the edges deteriorate. At least three named trading, business or retail sites lie within about 3 miles of Colbury. That puts plenty of warehouse floors, service yards and car parks close by, all with joints under traffic.
Campuses like Southampton Solent University, 4.6 miles east of Colbury, mix old and new buildings, with movement joints wherever they meet. Business parks such as Rushington Business Park, 0.6 miles north-east of Colbury, have car parks, paved areas and long brick and panel elevations, all with movement joints.
Colbury is about 1 mile south of Totton, in Hampshire. If you are looking for floor joint sealing in Colbury, we can help, as we do across Hampshire. Colbury is one of 723 places in Hampshire on our list.
Anyone looking for floor joint sealing in SO40 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. Close to Colbury, our area also takes in Ashurst (1 mile west), Lyndhurst (4 miles south-west), Emery Down (4 miles south-west), Balmerlawn (6 miles south-west) and Brockenhurst (6 miles south-west). Nearby towns on our patch include Winchester (14 miles north-east), Eastleigh (8 miles north-east), Fareham (14 miles east), Chandler's Ford (8 miles north-east), Hedge End (9 miles east) and Lymington (10 miles south).
Near you in Colbury
In Colbury, that means premises near Hounsdown School and The Forest Inn, among other places. Colbury’s nearest station is Ashurst New Forest station, about 1.2 miles south-west. Other landmarks nearby include Ashurst Hospital (1 mile south-west) and National Dairy Museum (under half a mile south). Green spaces nearby include Testwood Lakes.
Towns and villages near Colbury
More services for Colbury
For managing agents and facilities managers
FMs need a contractor who is easy to get on site. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we will confirm with the quote.
We take on planned maintenance as well as one-off repairs: resealing failed joints building by building, on a schedule that suits your budget. Colbury can form part of a wider programme across Hampshire.
What we’re called out for in Colbury
An ageing filler or sealant can go brittle and split, particularly where cleaning machines and traffic work it daily. At that point it neither holds the edges nor keeps debris out.
Things that usually lead to an enquiry:
- A gap opening alongside old joint filler
- Drivers complaining about joints on a route
- Chipped and spalling edges along forklift routes
- Sealant pulled out along a truck route
At places like Hounsdown Business Park, 0.7 miles east of Colbury, joints are sealed a section at a time so operations carry on.
What your quote should include
- Will failed sealant be removed rather than covered?
- Health and safety accreditation such as CHAS
- The named product and why it was chosen
- Proof of insurance
Doing it in-house
General builders and handymen seal joints, but it isn’t their main trade. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint.
Certain joints really need a specialist: for example fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. Getting these wrong usually costs more in the end than doing them right.
Colbury: questions and answers
Do you take on work at healthcare sites like Tatchbury Mount Hospital?
Yes, hospitals are one of the sectors we cover. Before anything starts, the estates team agrees permits, inductions and infection-control measures with us.
Is Colbury too small for you to travel to?
No. Places such as Colbury are covered as much as the big towns. We cover Greater London and the counties of the South East. Good photographs up front let us bring everything on the first visit.
Do you work to architects’ specifications?
Yes. Include it with the drawings when you ask for a quote, and the quote will be based on it, flagging anything that needs clarifying.
How do we get a quote for floor joints?
Use our quote form, or email photographs and a plan, with the traffic on each area. We then send a fixed quote that shows the products and zones.
Does the weather affect the work?
It can, for external work. Sealant won’t bond properly to a wet or frosty joint, so external work may be moved if conditions aren’t right. Internal work is far less affected.
Do you offer coloured sealant?
In many cases, yes. Sealants are made in a wide range of standard colours, and matching to RAL references or nearby finishes is commonly requested. We’ll confirm the colours available for the specified product.
Will you just go over the old sealant?
No, never. Overlaying old sealant is a frequent cause of early failure, so it all comes out first.