Floor Joint Sealing in Broxted
Floor joint sealing for Broxted, from a contractor working since 2005. Fully insured and CHAS accredited.
- Failing joints at loading bays and dock doors
- Sealant pulled out along a truck route
- Open saw cuts full of debris
Need floor joint sealing in Broxted?
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Floor joint sealing for commercial buildings in Broxted
Before quoting, we look at what the floor is telling us: how wide the joints are, signs of ongoing movement, the wheel types crossing them and the state of the arrises. From that we choose between a semi-rigid filler and a more flexible sealant and the answer can differ from one zone to the next. The enquiries we see most involve saw-cut joints left open and packed with grit and joint edges breaking up under truck wheels, across joints along racking aisles, saw-cut induced joints and loading bays. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, the work in Broxted is the same: the right product in a properly prepared joint.
Halls, schools and small commercial buildings near places like Broxted have movement joints in brick, block and concrete too. They tend to be overlooked until something leaks or cracks.
Every job we finish is backed by a 12-month workmanship guarantee. If our installation lets you down in that time, we return and fix it.
- Location
- Broxted (CM6)
- Region
- Essex
- Guarantee
- 12 months on every job
- Price
- Quoted before any work starts
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Work for main contractors and building owners
Hospitality, education, healthcare, office and retail clients come to us directly as well. The work is planned around how the building runs, so the building keeps working while we do.
Blocks and communal areas make up much of the work for housing associations and agents. We phase the work so people keep access, and each stage is agreed with your contact.
Towns and villages near Broxted
More services for Broxted
Our process
The first thing on site is a walk round with your contact, to confirm the scope, the order of work and any areas we must keep clear. After that, any old or failed material is removed, each joint is prepared and the new sealant goes in. If others near Broxted need work, visits can be combined, which keeps travel down. You will have a fixed quote before work starts.
- We walk the floor and mark up joint widths, edge damage and traffic routes.
- The treatment and the zones are set out in a fixed quote.
- Each joint is cut or routed back to clean, sound concrete.
- We extract the dust and prime the faces if the product needs it.
- Filler or sealant is placed to depth and finished flush.
- We hand each phase back when it can take traffic.
What we need from you
- Point out parking and an unloading spot
- Share the asbestos register for older buildings
- Let building users know which areas are affected
Quotes
If there’s a specification, drawings or a tender package, send it with your enquiry, and we will price against exactly what is specified. For smaller jobs, photos and a description will do.
Related advice
Why it’s worth doing now in Broxted
Dirt and spillage gather in open joints, out of reach of the floor cleaner. Where the floor is on show or needs to be kept clean, that is a problem. Flush, filled joints leave nothing for cleaners to dig out. For buildings around smaller places like Broxted, water damage can go unnoticed for longer, especially where a building isn’t used daily, so a failed joint can leak for a while before anyone sees it. Resealing early avoids that.
We don’t publish prices, since every building and every scope is different. Call for a quote and we’ll price your job on its own details.
What you get with us
- Constructionline member for supplier checks
- Fully insured
- Failed material removed, not covered up
- One number for every site we cover
See what affects the cost and our accreditations and insurance.
FAQs: Broxted
Can you work at a site such as Williams Field Business Centre, by Broxted?
Yes. Estates, retail parks and business parks around Broxted, Williams Field Business Centre among them, are all within reach. A few photographs and the unit address let us price the work.
Is a smaller place like Broxted outside your area?
Not at all. Broxted is within our area. London and every South East county are within our area. Send photographs and a list of what needs doing, and we will plan the job to need as few trips as possible.
What if there’s asbestos in the old mastic?
Asbestos is possible in some older mastics, particularly in buildings from before 2000. We check the asbestos register before cutting out old sealant in an older building, and work stops until any suspect material has been tested. Removing asbestos is a job for asbestos specialists, not us.
Will your applicators have CSCS cards?
Yes. If you need card details for site access, tell us and we will confirm them with the quote.
Do you hold CHAS accreditation?
Yes. We are CHAS accredited, we’re a Constructionline member and we use CSCS-carded applicators.
When is resealing likely to be due?
It depends on movement, UV and weather, cleaning, traffic and the product. Sealant joints are maintenance items, so inspect them regularly.
Why is there a gap next to the joint filler?
Separation normally comes from slab shrinkage, poor preparation or the wrong product. We diagnose the cause before suggesting a fix.
How the job changes by surface
Flexible floor sealants
Polyurethane floor sealants are available in a range of colours so ask if the colour matters.
Loading bays and dock areas
Dock areas see tight turns, heavy loads and weather blowing in. These are often the first joints on site to break down so many programmes begin here.
Doing it in-house
Some joints are best left to specialists: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. Getting these wrong usually costs more in the end than doing them right.
A short, simple internal joint is often within reach of a maintenance team. The usual problems come from preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
Traffic, movement and joints around Broxted
The 3 miles around Broxted take in at least three named trading estates, business parks or retail parks. Sites like these are full of saw-cut floor joints, yard slabs and car park joints. The South East is one of the drier parts of the UK. External joints still wait for dry conditions, while winter salting gets into any joint left open.
On a site such as Williams Field Business Centre (0.9 miles south-west of Broxted), the movement joints are in car park slabs, paving and building elevations. At places like Mill End Business Centre, 2.7 miles to the south-west of Broxted, joints are sealed a section at a time so operations carry on.
Broxted is about 7 miles north-east of Bishop's Stortford, in Essex. Broxted sits inside our coverage, with the same fixed quotes and 12-month guarantee as everywhere else. We work across 644 places in Essex, large and small. Sites around London have their own page, about 34 miles away.
Anyone looking for floor joint sealing in CM6 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. We cover commercial and managed buildings on St Mary's Mews and Cranham Road and the roads nearby. If your building is just outside Broxted, we cover Brick End (1 mile south), Henham (2 miles west), Debden Green (3 miles north), Fuller's End (3 miles west) and Elsenham (3 miles west). Nearby towns on our patch include Chelmsford (15 miles south-east), Braintree (12 miles east), Harlow (13 miles south-west), Saffron Walden (7 miles north), Halstead (15 miles east) and Great Dunmow (4 miles south-east).
Local landmarks in Broxted
The closest station to Broxted is Stansted Airport station, about 2.7 miles south-west. A little further out are Little Easton Moat (2.9 miles south-east). Not far away are Aubrey Buxton Nature Reserve.
How the quote is worked out
Each job is priced on its own details. The main factors are:
- Backing rod, priming and other preparation
- Removal of failed or old sealant
- How much there is to seal
- How accessible the joints are
Whether it’s a single area or a whole estate, the same things set the price: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote, and you will have a fixed figure to work with.
Before you send an enquiry
There’s no need for a formal survey. A few details are enough to get going:
- Asbestos survey details if the building is older
- Any specification or named product
- Drawings or a marked-up plan, if available
- When you need the work done
Tell us about the building, the joints and when you need the work done, and a fixed quote will follow. The easiest way is to ring 01277 525 020 or use the quote form.