Industrial and floor joint sealing in Broadgate, Hampshire
Our CSCS-carded applicators take on floor joint sealing and filling in warehouses, factories and industrial units in Broadgate and the surrounding area. Send photos or drawings for a fixed quote.
- Dock area joints that have failed first
- Saw-cut joints left open and packed with grit
- A rough ride across broken joints
Floor joint sealing near Broadgate
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Floor joint sealing in Broadgate
Concrete floors in warehouses and factories are cut into bays with saw cuts and day joints, and each joint line is a weak edge that wheels run over all day. Our job is to put the right filler or sealant into them for the loads and the movement they see so the edges are held up and debris can’t pack in. If you have open saw cuts full of debris and soft sealant dragged out of trafficked joints, we can put it right, on retail and showroom floors, forklift and pallet-truck routes and joints along racking aisles alike. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: in Broadgate, that means joint design, primers and backing rod as standard.
Around smaller places such as Broadgate, floor joints are often in barns and farm buildings turned into workshops, stores and offices. Joints in those slabs take vehicles, trolleys and foot traffic, and need a filler or sealant to match.
A 12-month guarantee applies to all our work. If an installation problem shows up, phone 01277 525 020 or email the details over and we will arrange a return visit.
- Where
- Broadgate (SO51)
- Wider area
- Hampshire
- Cover
- A 12-month guarantee
- Price
- A fixed quote before we start
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
On site: what to expect
On arrival, we sign in, go through any site induction and check how permits are handled. Floors, finishes and fittings next to the joints are covered before any cutting starts, and the work typically takes anything from a day for one loading bay to several days for a large floor, split into phases. If others near Broadgate need work, visits can be combined. You will have a fixed quote before work starts.
- Each area is assessed for joint width, arris damage and the wheels that cross it.
- You get a fixed quote with the product and the phasing set out.
- Each joint is cleared of old fill and dirt and taken back to clean, sound edges.
- Dust is extracted from the joint and primer applied where the manufacturer specifies it.
- Filler or sealant goes in to the right depth and is finished flush with the slab.
- We tell you when each zone can carry trucks again and move on to the next.
What we need from you
- Share your working hours and any access restrictions
- Point out parking and an unloading spot
- Send asbestos survey details if the building is pre-2000
Request a quote
Photos, drawings or a schedule of the joints and a fixed quote comes back to you. If the job needs a look first, we will arrange a site visit.
Read more
Places near Broadgate
Other services in Broadgate
Aftercare for building managers
Regular inspection catches problems early. In particular:
- Ask drivers not to drag forks or pallets
- Expect fillers on young slabs to need a top-up
- Respect the cure time before traffic returns
- Mention any aggressive cleaning regime at quote stage
If a joint we filled starts to break up within 12 months, tell us and we’ll arrange a look. Beyond that, an inspection once or twice a year catches failing joints early.
Regular inspection catches failing fills before the edges go. A phased plan, worst routes first, spreads the work out and keeps on top of the rest.
Your questions answered
Is a smaller place like Broadgate outside your area?
No. Places such as Broadgate are covered as much as the big towns. We cover Greater London and the counties of the South East. Send photos and a list of what needs doing, and we will plan the job to need as few trips as possible.
Can you work at a site such as Sleepy Hollow Business Park, by Broadgate?
Yes. We cover Broadgate and the area around it, including industrial estates, business parks and retail parks such as Sleepy Hollow Business Park. Send details of the unit and the work through our quote form for a quick quote.
Why has the filler pulled away from one side?
It can be shrinkage, contamination on the joint faces or a product unsuited to the movement. We look at which it is before recommending anything.
Will we need to close the floor?
The work is phased. Areas are taken out of use a section at a time. Tell us your site hours and access windows and we’ll plan around them.
Are you insured?
Yes. Mastic Doctor is fully insured, public liability included.
Is colour matching possible?
It depends on the product. Some ranges are wide, others limited, so the available colours are confirmed with the quote.
What happens if the joint edges are damaged?
A filler needs sound edges to grip. We will tell you if the joint edges need repairing first, so you can decide how to proceed.
Building owners, agents and FMs in Broadgate
Hotels, schools, healthcare sites, offices and retail units book us directly too. The work is planned around how the building runs, so the building keeps working while we do.
For main contractors, we work as the sealant subcontractor. Programme, specification and site rules come first, with CSCS-carded applicators on site.
Surface by surface
Saw-cut induced joints
Open saw cuts collect grit and break at the arris. Filled in good time, they stay narrow and neat.
Forklift and pallet-truck routes
Truck routes take traffic all day, so their joints wear fastest. Semi-rigid fillers are widely used on these routes to hold the edges up.
Traffic, movement and joints around Broadgate
Rainfall across the South East, Broadgate included, is lower than in many parts of the UK. Even so, yard and car park joints are only sealed when they’re dry and clean, while winter salting gets into any joint left open. Broadgate has at least three named business or industrial parks inside a 3-mile radius. Their warehouses, yards and car parks are exactly where joints take the most punishment.
At a retail site such as Chestnut Avenue Retail Park, which lies south of Broadgate, trolleys, cages and cars run over floor and slab joints all day. Large sites such as Wessex Hospital (2.3 miles east of Broadgate) have car parks, service roads and long elevations with movement joints in brick and panels.
Broadgate is about 2 miles north-west of Chandler's Ford, in Hampshire. We send applicators to Broadgate for floor joints, handled exactly as we handle every other area. Broadgate is one of 723 places we cover in Hampshire for floor joints. Our Southampton page has more on work in that area (6 miles or so).
Business premises anywhere in SO51 are within our area. For a building on Hook Road, Broadgate Farm and Woodlea Way or nearby, we can quote for floor joints. Just outside Broadgate, we also work in Knapp (1 mile north-west), Ampfield (1 mile west), Gosport (1 mile west), Crampmoor (2 miles west) and Lower Slackstead (2 miles north-west). Further afield, our area takes in Winchester (6 miles north-east), Eastleigh (4 miles south-east), Fareham (14 miles south-east), Andover (15 miles north), Totton (7 miles south-west) and Hedge End (8 miles south-east).
Landmarks near Broadgate
In Broadgate, that means premises near White Horse Public House and Thornden School. The nearest railway station is Chandlers Ford station, about 1.8 miles south-east of the centre. A little further out are Romsey Community Hospital (3.2 miles west) and Eastleigh Museum (3.5 miles south-east). The countryside around Broadgate includes Flexford Nature Reserve.
What affects the price in Broadgate
Each job is priced on its own details. The things that drive the figure:
- How accessible the joints are
- Working within restricted access windows
- The product specified
- Backing rod, priming and other preparation
We don’t publish prices, since every building and every scope is different. Call for a quote and we will price your job on its own details.
What we need to price the job
Whether it’s one area or a whole building, these details speed things up:
- Photos of the joints, close up and from further back
- Whether an asbestos survey exists
- The postcode of the building
- Whether the building will be occupied during the work
A good quote starts with a clear picture: what’s there, how much of it, how we reach it and what’s specified. Send what you have, and we will arrange a site visit if anything is unclear.
Signs you need floor joint sealing in Broadgate
Left open, joints fill with grit, wrap and wood fragments. Packed debris acts like a wedge every time a wheel crosses so the arrises break sooner.
Typical triggers for a call:
- Old filler gone hard, cracked or loose
- Untidy open joints in a retail unit
- Sealant pulled out along a truck route
- Joint fill separating from the concrete
Another example is Monks Brook Industrial Park, 1.8 miles to the south-east of Broadgate, where floors and yards would be done in stages around the occupiers.
Questions to ask before you book
- Will CSCS-carded applicators be on site?
- Do they follow the manufacturer’s priming guidance?
- Which product they’ll use, and why it suits the joint
- How they handle RAMS and site documents