The Mastic Doctor team standing beside their branded vans outside an office building
Essex · England

Broad Street Green floor joint sealing

Floor joint sealing in Broad Street Green, backed by over 20 years in commercial sealing. Fully insured, with a 12-month guarantee.

  • Saw-cut joints left open and packed with grit
  • Filler that has parted from one face
  • Loading bay joints breaking down
1
Send details
Photos, drawings or a schedule, or we visit.
2
Get a quote
A fixed quote for the work, with the scope in writing.
3
We seal
Prepared joints, the specified product, a tidy finish.
4
Guaranteed
Backed by a 12-month workmanship guarantee.
London, the South East & Scotland
CHAS & Constructionline
£5m public liability

Need floor joint sealing in Broad Street Green?

Photos, a specification or a quick description of the joints is enough to start a fixed quote.

About our floor joint sealing in Broad Street Green

Few warehouses can shut a whole floor while joints are done, so we phase the work aisle by aisle or bay by bay. Share your site hours and access windows and the programme is built around them, with goods still moving in the areas we aren’t in. The enquiries we see most involve grimy joint lines spoiling a showroom floor and a gap opening alongside old joint filler, on construction joints, forklift and pallet-truck routes and retail and showroom floors. Looking for mastic applicators who cover Broad Street Green? Mastic Doctor has worked for contractors, FMs and building owners since 2005.

Halls, schools and small commercial buildings near places like Broad Street Green have movement joints in brick, block and concrete too. They’re easily forgotten until water gets in or an edge breaks.

The 12-month guarantee covers our workmanship: preparation, application and finish. It doesn’t extend to damage, other trades’ later work or movement the joint was never designed to take.

Mastic Doctor team members lined up next to their branded vans outside an office building
Location
Broad Street Green (CM9)
Region
Essex
Cover
A 12-month guarantee
Price
Fixed quote, scope in writing
Phone
01277 525 020
Page updated
3 November 2026

Keeping the joints sound

After handover, a little attention goes a long way:

  • Keep trucks off new joints until we say they’re ready
  • Treat loading bay joints first if they’re failing
  • Let us know what the floor is cleaned with
  • Keep grit out of unfilled joints in the meantime

Once cured, the joints get cleaned along with the slab. If you use strong chemicals or hot-water washing, mention it when we quote so the product suits them.

Treating joints while the arrises are sound keeps the work simple. After the edges go, repairs come into it and that takes longer and closes areas for longer.

How the job changes by surface

Semi-rigid joint fillers

Semi-rigid fillers are designed to support joint edges under hard wheels. They tolerate little movement, so they suit joints where most shrinkage has already happened.

Isolation joints at walls and columns

Joints around columns and along walls let the slab move without cracking against the structure. A flexible product suits them better than a stiff filler.

What sets the cost

These are the things that shape the price:

  • Specialist products, such as fire-rated or hygienic sealants
  • Quantities, in metres or numbers
  • Removal of failed or old sealant
  • Location, for remote and island sites

Every site prices differently: joint size, product, access and site hours all play a part. Send the details and a fixed figure follows.

What we need to price the job

We can often quote from photos and a few details. It helps to include:

  • How the joints are reached, and at what height
  • The type of building and who uses it
  • Clear photographs of the problem areas
  • Asbestos survey details if the building is older

Send us photographs, drawings or a joint schedule are often enough for a fixed quote. Where a site visit makes more sense, we will arrange one.

Our process

We schedule the visit to fit the site hours and access windows you give us. On the day, the work area is kept contained and tidy, and we check in with your contact before moving on to each new area. For a building around Broad Street Green, tell us how to find it and who will meet us. Send that with the details and we will confirm the plan with the quote.

  1. First, the zones and order of work are agreed with you.
  2. Any joints with broken edges are flagged before work starts.
  3. We clear each run back to clean concrete.
  4. We fill the joints with the agreed product, finished level.
  5. Each area is handed back when ready for traffic.

Getting the site ready

  • Agree which areas must stay open
  • Share your working hours and any access restrictions
  • Move anything stored against the joints

Getting a fixed quote

Specifications, drawings and tender packages are welcome with any enquiry, and we’ll price the work to it. For smaller jobs, photographs and a description will do.

Ask for a quote

Related advice

Slabs, ramps and loading bays in Broad Street Green

Broad Street Green is within about 3 miles of the coast. Open joints in coastal car parks and yards let in salt-laden water as well as grit, and edges left open tend to break up faster. At least three named trading, business or retail sites lie within about 3 miles of Broad Street Green. That puts plenty of warehouse floors, service yards and car parks close by, all with joints under traffic.

Sites like St Peter's Hospital, 2 miles to the south-west of Broad Street Green, carry ambulances, deliveries and visitors’ cars over their road and deck joints. Schools such as Heybridge Primary School have movement joints in their walls and floors that are easy to overlook. Estates like The Causeway Industrial Estate (to the south-west of Broad Street Green) combine warehouse slabs, yards and loading bays, all with joints under wheels.

Broad Street Green is about 2 miles north of Maldon, in Essex. Any commercial site in Broad Street Green is covered, for single jobs and planned programmes alike. Broad Street Green is one of 644 places we cover in Essex for floor joints. For work in that direction, see our London page.

Anyone looking for floor joint sealing in CM9 gets the same process as the rest of our area: send details, get a quote, we seal, guaranteed. We also cover Heybridge (1 mile south), Great Totham (1 mile north), Langford (1 mile west), Wickham Bishops (2 miles north-west) and Beacon Hill (2 miles north). Bigger towns within reach include Colchester (13 miles north-east), Chelmsford (9 miles west), Braintree (10 miles north-west), Billericay (15 miles south-west), Rayleigh (12 miles south) and Witham (4 miles north-west).

Landmarks near Broad Street Green

We work on buildings around Plume Library and Plume School and the streets around them. The nearest railway station is Witham station, roughly 4.2 miles north-west of the centre. Well-known places in the area include Maldon & District Agricultural & Domestic Museum (2.8 miles east). Green spaces nearby include Chigborough Lakes.

Map of Broad Street Green © OpenStreetMap contributors

Honest limits

Before quoting, we check that sealant is the right answer. It isn’t the answer for:

  • Wide or random cracking that suggests a structural issue
  • Joint edges that have already broken away, which need repairing before filling (we will tell you if so)
  • A floor that rocks at the joints, which needs a structural fix

If in doubt, call 01277 525 020 or send photos by email and we will say what we think before you book.

What we seal

  • Loading bays
  • Construction joints
  • Joints along racking aisles
  • Forklift and pallet-truck routes
  • Retail and showroom floors
  • Saw-cut induced joints

Your questions answered

Do you cover business parks and estates near Broad Street Green, such as The Causeway Industrial Estate?

Yes, sites like The Causeway Industrial Estate are within our area, along with the rest of Broad Street Green. To start, just ring 01277 525 020 or use the quote form with the unit, the joints involved and your access times.

Does the sea air around Broad Street Green change the choice of sealant?

It can. Coastal exposure works external joints harder than inland weather. We choose the product for the exposure, prime where the manufacturer requires it and size the joint for its movement.

Who decides which product is used?

If the job is specified, we follow the specification. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.

Do you cover Broad Street Green?

Yes. Sites across Broad Street Green are covered, with one number for every area we cover.

Can you phase floor joint work around operations?

Normally only the zone we are working in has to close. Each zone reopens when the product can take traffic and the next zone follows.

Can weather delay the job?

For external joints, yes. The joint has to be dry and within the product’s temperature range, so damp, frosty or very cold days can stop external work. Inside work is seldom held up.

Are your applicators CSCS-carded?

Yes. Should the site need card details in advance, let us know and we’ll send them with the quote.

What happens if it’s left?

Open joints are where dirt collects where scrubber-driers can’t get it out. Where the floor is on show or needs to be kept clean, that is a problem. Filled joints are far simpler to keep clean. Older rural buildings around Broad Street Green move with the seasons, and rigid or tired sealant can’t keep up. A sealant with the right movement capability, correctly sized, lasts far better.

Larger quantities, tricky access or phasing all shape the price. So do site requirements such as inductions and permits.

Why appoint us

  • Constructionline member for supplier checks
  • CHAS accredited contractor
  • Old sealant cut out, never sealed over
  • A fixed quote before work starts

Read our cost guide or how we’re accredited.

Accreditations

Trusted. Accredited. Insured.