Fire-rated sealing and fire stopping in Tourner Bury, Hampshire
Fire stopping in Tourner Bury, backed by over 20 years in commercial sealing. Fully insured, with a 12-month guarantee.
- Expanding foam used as fire stopping
- Openings left by services added after handover
- Fire-rated sealant that has cracked or shrunk back
Fire stopping near Tourner Bury
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
From enquiry to sign-off
At the end of each section, we remove the tape, clean down and inspect every joint. If an area should be left alone while the sealant cures, we say how long and put signs out. For a building around Tourner Bury, tell us how to find it and who will meet us. Add it to your enquiry and we will build it into the plan.
- We ask for the product and detail your designer has specified.
- We sort the openings by the detail each one needs.
- Old or wrong materials are cut out.
- Mineral wool or other backing is fitted where required.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- We walk the completed areas with you and confirm the records agreed at quote stage.
Before we start on site
- Agree which areas must stay open
- Tell us what induction or permit system the site runs
- Have the specification and drawings to hand
Request a quote
Every quote starts with the facts: the joints involved, quantities, access and the product called for. Send what you have, and we will arrange a site visit if anything is unclear.
Read more
Fire stopping in Tourner Bury
On a fit-out or refurbishment, we follow the services contractors floor by floor. To price a package, call 01277 525 020 or send photos by email with the schedule or marked-up drawings and the specified product data. Tell us what records you need and we will confirm with the quote. The enquiries we see most involve seals that don’t match their tested detail and fire seals cut back for extra cables and never reinstated, on linear gaps at wall heads, pipe penetrations and cable penetrations. Looking for mastic applicators who cover Tourner Bury? We have been sealing commercial buildings since 2005, CHAS accredited and a Constructionline member.
Smaller places such as Tourner Bury still have buildings with fire-resisting walls and floors: schools, halls, care homes and commercial conversions. Any service penetration through those walls should be closed with the specified product, set out as its test evidence shows.
Our 12-month guarantee is about workmanship, not wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we spell out the cover before we begin.
- Place
- Tourner Bury (PO11)
- Wider area
- Hampshire
- Cover
- A 12-month guarantee
- Price
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Commercial clients in Tourner Bury
As a CHAS accredited contractor and Constructionline member, we make supplier vetting simple. Our insurance certificate can be sent along with the quote.
Hospitality, education, healthcare, office and retail clients come to us directly as well. We plan around the way the building is used, so the building keeps working while we do.
Why deal with it now?
A seal that doesn’t match its tested detail gives false comfort. Correcting it means cutting it out and starting again with the specified product. Converted and older buildings near places like Tourner Bury tend to move, and aged sealant cracks. A sealant with the right movement capability, correctly sized, lasts far better.
Small jobs and large programmes are priced from the same things: scope, access, product and programme. Call for a quote, and you will have a fixed figure to work with.
Why us?
- Products installed to the manufacturer’s instructions
- Work carried out by CSCS-carded applicators
- One number for every site we cover
- 12 months’ guarantee on every job
Read how commercial sealant jobs are priced and our accreditations and insurance.
Quoting for work in Tourner Bury
We price every job individually. The things that drive the figure:
- Travel to remote or island sites
- How much there is to seal
- How accessible the joints are
- Site requirements such as inductions and permits
The price depends on the quantity of joints, what has to come out first and how the joints are reached. Call for a fixed quote when you’re ready.
What we need to price the job
A good diagnosis starts with the right details. Let us know:
- Whether the building will be occupied during the work
- The postcode of the building
- Specification clauses that apply
- Access details, including height
We quote a fixed sum against the scope you give us, so the cost is agreed before work starts. To start the process, call 01277 525 020 or email a schedule or drawings.
Questions about Tourner Bury
What happens to BS 476 references for fire stopping in Tourner Bury?
From 2 September 2029, Approved Document B drops its BS 476 references in favour of BS EN 13501-2 classification, with transitional arrangements. The designer or fire engineer sets the specification, and we install the product to the manufacturer’s tested detail.
Will you work in a care home in Tourner Bury without moving residents out?
Yes. We agree rooms and times with the manager and work a few areas at a time. Any site rules, from signing in to infection control, are agreed before we start.
Can you handle several sites?
Yes. A group of buildings can go on one quote, with one point of contact.
How long before the joints can be used?
We will confirm how long the chosen product needs to cure.
What do you charge?
Each job is quoted on its own details. For yours, call the office on 01277 525 020 or send details through our quote form with a description of the work.
Will you quote for a small job?
Whatever the size, the process is the same: details, then a fixed price, then sealing, then a 12-month guarantee.
Do you need to see the site first?
It depends on the job. Straightforward work can often be priced from photographs and measurements, and bigger or more complex jobs normally get a visit.
Fire-rated sealing for Tourner Bury buildings
Tourner Bury is about 62 miles from central London. Business park offices in the commuter belt are refitted as tenants change, and each fit-out adds services through compartment walls. There are four care or nursing homes within about 2 miles of Tourner Bury. Care settings depend on compartmentation, so service penetrations made during maintenance or refurbishment need sealing with the specified product. Where that’s fire-rated sealant, we install it to the manufacturer’s tested detail.
At a university such as University of Portsmouth - Langstone Campus, which lies west of Tourner Bury, labs, lecture blocks and residences are re-serviced often, so penetration seals are best checked after M&E work. Halls and meeting rooms at places like St Mary's Church sometimes gain new services, and any compartment wall crossed needs the specified seal.
Tourner Bury is about 1 mile north-east of South Hayling, in Hampshire. Commercial clients in Tourner Bury use us for work on service penetrations, as part of our coverage of Hampshire. We work across 723 places in Hampshire, large and small.
We cover the PO11 postcode districts. Buildings on Tournerbury Lane, St Benedict Road and Beech Grove are within our area for service penetrations. Sites close to Tourner Bury are covered too, including South Hayling (1 mile south-west), West Town (1 mile west), Tye (2 miles north), Stoke (2 miles north) and North Hayling (2 miles north). Bigger towns within reach include Gosport (8 miles west), Havant (5 miles north), Fareham (11 miles west), Horndean (8 miles north), Waterlooville (7 miles north-west) and Petersfield (15 miles north).
Around Tourner Bury
In Tourner Bury, that means premises near The Hayling College and The Hayling College, among other places. The nearest railway station is Warblington station, about 4.1 miles north. Nearby you’ll also find Eastney Beam Engine House (3.6 miles west) and St James Hospital (3.8 miles west). Not far away are Hayling Billy.
What sealant work can’t fix
Part of a good diagnosis is knowing where sealant stops. You will hear from us if the cause turns out to be one of these:
- Fire risk assessments, a job for a competent assessor
- Plastic pipes whose detail calls for a collar or wrap
- Gaps in walls that were never built as compartment walls
If in doubt, ring 01277 525 020 or email drawings and photos and we will say what we think.
Surfaces we seal
- Small duct penetrations where the tested detail allows
- Pipe penetrations
- Joints between fire-resisting walls and floors
- Cable penetrations
- Linear gaps at wall heads
- Service gaps in risers
Common problems we fix in Tourner Bury
Physical damage is another reason seals stop doing their job. Maintenance work can knock a seal, cut it back for an extra cable or remove it with an old pipe.
Any of the following is a good reason to get the joints checked over:
- Penetration schedules that need working through
- Service penetrations left open after M&E works
- Improvised or mixed-product fire seals
- Fire-rated sealant that has cracked or shrunk back
For a hospital such as St James Hospital, which lies west of Tourner Bury, penetration sealing is normally phased ward by ward, with infection-control rules agreed first.
What to look for in a quote
- The named product and why it was chosen
- Whether their applicators hold CSCS cards
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
- Their pre-qualification and accreditations