The Murray fire stopping
Fire stopping in The Murray, backed by over 20 years in commercial sealing. Fully insured, with a 12-month guarantee.
- Seals that don’t match their tested detail
- Hidden openings found during inspections
- Fire-stopping items raised at inspection or handover
Fire stopping for The Murray sites
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
General trades versus a specialist
Putting right a botched joint often costs more than sealing it well at the start, since all of it has to come out and the faces be cleaned back again. That’s why many clients bring in a specialist from the beginning.
Site maintenance staff can often handle a short internal joint. The usual problems come from preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
How we handle fire stopping in The Murray
No fire sealant works on its own: the evidence covers a specific product, wall or floor type, service, gap, depth and backing. We match each opening to that detail before any sealant goes in, and we say so if it doesn’t fit. We work on pipe penetrations, cable penetrations and linear gaps at wall heads, and the failures we’re asked to look at most are seals disturbed by maintenance and left open and non-fire-rated filler around services. A specialist sealant contractor works differently from a general builder: on jobs in The Murray, preparation and product choice get the time they need.
Travel to smaller places like The Murray is planned so every penetration is sealed on one trip. Photos of the gaps, the services and the wall or floor type help us bring the right products.
The 12-month guarantee covers our workmanship: the preparation, the sealing and the tooling. It doesn’t extend to damage, other trades’ later work or movement the joint was never designed to take.
- Where
- The Murray (G75, G74)
- Region
- South Lanarkshire
- Cover
- 12 months on every job
- Price
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Towns and villages near The Murray
More services for The Murray
Penetration seals near The Murray
Scotland has its own building standards: the non-domestic Technical Handbook (clause 2.1.14) says service penetrations should be fire stopped to at least the fire resistance duration of the wall or floor, and products should be tested for their end use. Our part is installing the specified fire-rated sealant to its tested detail. The Murray has two care or nursing homes no more than 2 miles away. Care settings depend on compartmentation, so service penetrations made during maintenance or refurbishment need sealing with the specified product.
Tenant changes at centres like East Kilbride Shopping Centre, under half a mile to the north-east of The Murray, often mean new services through walls between units. In a hotel such as Bruce Hotel, under half a mile to the north-east of The Murray, new pipework or cabling through bedroom and corridor walls needs sealing with the specified product.
The Murray is about 1 mile east of East Kilbride, in South Lanarkshire. We cover The Murray and the rest of South Lanarkshire, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. The Murray is one of 134 places in South Lanarkshire on our list. We also cover Glasgow, some 8 miles away.
We cover the G75 and G74 postcode districts. Buildings on Cullen Road, Darwin Road and Owen Avenue are within our area for service penetrations. The Murray sits on or close to the A726, useful when we plan access and materials. Nearby places we also cover include East Kilbride (1 mile west), West Mains (1 mile north), Greenhills (1 mile south-west), The Village (1 mile north-east) and Birniehill (1 mile east) for service penetrations. Further afield, our area takes in Hamilton (5 miles east), Cambuslang (5 miles north), Uddingston (6 miles north-east), Blantyre (4 miles north-east), Larkhall (8 miles east) and Carluke (14 miles east).
Near you in The Murray
Recent enquiries here include premises near The Hay Stook pub and Mount Cameron Primary School and the streets around them. For rail, the closest station is East Kilbride station, roughly 0.7 miles north. Other landmarks nearby include Hairmyres Hospital (1.5 miles west) and Mains Castle (1.5 miles north). The countryside around The Murray includes Cathkin Braes.
Our process
Site rules come first: sign-in, induction and whatever permit system the building uses. With the paperwork done, the joints are worked through in the order agreed with your site contact, and each area is checked before we leave it. Jobs near The Murray are often grouped with others in the same area. Let us know if your dates have any give.
- First we go through the drawings, schedule or specification for the seals.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- We fit the backing the detail asks for, to the stated depth.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
What we need from you
- Send any specification or drawings in advance
- Point out any areas we must not close
- Point out parking and an unloading spot
Get a fixed quote
For a fixed quote, give us a call on 01277 525 020 or email us, telling us the site location and the nature of the job. You can also send details through our quote form.
Read more
What sealant work can’t fix
Being straight saves everyone time. Fresh joints won’t solve:
- Walls or floors that aren’t fire-resisting to begin with
- Designing or specifying fire stopping, which sits with the designer or fire engineer
- Approving the work on behalf of building control
If in doubt, speak to us on 01277 525 020 or use the quote form and we’ll say what we think before you book.
Surfaces we seal
- Service gaps in risers
- Pipe penetrations
- Linear gaps at wall heads
- Cable penetrations
- Joints between fire-resisting walls and floors
- Small duct penetrations where the tested detail allows
What we’re called out for in The Murray
Openings in fire-resisting walls typically appear when services are added or changed. New cabling, rerouted pipework or a data route drilled through a riser leaves an opening that nobody returns to. Across several fit-outs, the openings add up.
What tends to prompt an enquiry:
- Non-fire-rated filler around services
- Seals that don’t match their tested detail
- Fire sealant pulled out of the opening
- Unsealed joints where partitions meet the slab
On a hospital site such as Hairmyres Hospital (1.5 miles west of The Murray), fire-rated sealant goes in where the specification calls for it, with the work planned around the estates team’s permits.
Questions to ask before you book
- Their pre-qualification and accreditations
- Whether their applicators hold CSCS cards
- Will failed sealant be removed rather than covered?
- Can the work be phased to keep areas open?
Looking after the joints
Cleaning and maintenance staff play a part too. Share these points with them:
- Brief every trade that openings they make must be sealed
- Keep product data and details in the fire safety file
- Settle who seals which penetrations at the start of a project
- Arrange inspection before areas are covered up
During planned inspections, look at seals in risers, cupboards and voids. Look for cracks, unsealed new cables and gaps that have been enlarged, and report them promptly.
A simple record of seal locations and products helps. It tells the next contractor exactly what to reinstate, which saves guesswork.
Surface by surface
Drylining partitions
Service holes through plasterboard are frequently oversized or ragged. An oversized hole may be outside the sealant’s range and we will tell you what the detail says instead.
Risers and ceiling voids
Risers and ceiling voids hold most of a building’s service penetrations. Access to these areas is planned with you in advance.
Common questions from The Murray clients
Do you work on fire-rated sealing in hotels in The Murray?
Yes, to the specification and the product’s tested detail. It goes in to the manufacturer’s tested detail for the wall or floor and the services passing through, and we’ll tell you if the detail calls for a collar, wrap or batt instead.
Can work at a site such as South Lanarkshire College fit around teaching?
Yes. We plan campus work around teaching, exams and residence turnarounds. We’re CHAS accredited and a Constructionline member, and paperwork such as RAMS is confirmed with the quote.
Who decides which product is used?
If the job is specified, we follow the specification. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.
Are you fully insured?
Yes. We are fully insured, and the certificate can go with your quote.
What about RAMS and site documents?
Requirements differ from site to site, so list what you need, whether RAMS, insurance or CSCS details, and we will confirm with the quote.
How do I request a quote?
There are four steps: send details, receive a fixed quote, we carry out the work, and it’s guaranteed. Step one needs little more than photos and a postcode.
Are your applicators CSCS-carded?
Yes. If you need card details for site access, tell us and we’ll confirm them with the quote.