Streatley fire stopping
Need fire stopping in Streatley? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Service penetrations left open after M&E works
- Snag lists that include open service penetrations
- Fire sealant pulled out of the opening
Fire stopping near Streatley
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Fire stopping in Streatley
Sealant is the specified answer for plenty of openings, such as metal pipes, cables and some small ducts where the detail covers them. Larger openings and some plastic pipes call for collars, wraps, batts or boards instead. If the detail calls for something other than sealant, we say so rather than force sealant into it. Site teams most often ask us about service penetrations left open after M&E works and improvised or mixed-product fire seals, across cable penetrations, service gaps in risers and joints between fire-resisting walls and floors. A single leaking joint is often how a building in Streatley first comes to us: we check the joints around it and give you an honest view of what needs doing now and what can wait.
Around smaller places like Streatley, penetration seals come up in schools, halls, pubs with rooms, care homes and farm buildings used as offices. Any service penetration through those walls should be closed with the specified product, set out as its test evidence shows.
Every job ends the same way: guaranteed. You get a 12-month guarantee on our workmanship, and the quote explains what it covers.
- Place
- Streatley (RG8)
- Wider area
- West Berkshire
- Guarantee
- 12 months on every job
- Price
- A fixed quote before we start
- Call
- 01277 525 020
- Updated
- 3 November 2026
When it isn’t the sealant
Part of a good diagnosis is knowing where sealant stops. We’ll tell you if the real problem is any of the following:
- Deciding what a wall or floor needs, which belongs to the designer
- Approving the work on behalf of building control
- Fire doors, dampers or other fire safety equipment
If you are not sure, just call 01277 525 020 or email the details over and we will give you a straight answer.
Joints and surfaces we work on
- Joints between fire-resisting walls and floors
- Service gaps in risers
- Cable penetrations
- Small duct penetrations where the tested detail allows
- Pipe penetrations
- Linear gaps at wall heads
Our process
We schedule the visit to fit the site hours and access windows you give us. On the day, the work area is kept contained and tidy, and your contact hears from us before we move to the next area. For work around Streatley, we aim to finish in one visit, so we ask for photos and rough sizes first. That way the right products come on the day.
- The specification and schedule come first, so we know which details apply.
- Access, permits and the order of areas are agreed with the site team.
- Each opening is checked for wall or floor type, service, gap and depth.
- Unsuitable material is removed and the opening cleaned first.
- The specified backing and sealant go in to depth and are finished neatly.
- Anything outside the detail is reported to you rather than sealed.
Before we start on site
- Send any specification or drawings in advance
- Clear stock, furniture or equipment away from the joints
- Flag any permit to work we will need
Get a fixed quote
A good quote starts with a clear picture: the joints involved, quantities, access and the product called for. Send what you have, and we will arrange a site visit if anything is unclear.
Related advice
After the work
Once the work is signed off, these steps help:
- Have penetrations checked while they can still be seen
- Record which product was used where
- Ask which product is in place before decorating
- Settle who seals which penetrations at the start of a project
Add risers, plant rooms and ceiling voids to routine fire-stopping checks. Watch for cracked sealant, new services with no seal and openings that have grown, and report them promptly.
Write fire stopping into the scope of any work crossing a compartment wall or floor. Then the seal goes in while the area is open.
Nearby places to Streatley
More services for Streatley
Different surfaces, different methods
Small ducts
Small ductwork can sometimes be sealed with sealant where the tested detail includes it. Bigger ducts and fire-resisting ductwork are normally handled with other products and we flag that rather than guess.
Drylining partitions
Holes in board are often cut larger than needed. If the gap exceeds the tested range, sealant alone won’t do.
For managing agents and facilities managers
Blocks and communal areas make up much of the work for housing associations and agents. We phase the work so people keep access, with each stage agreed with your site contact.
Hotels, schools, healthcare sites, offices and retail units come to us directly as well. The work is planned around how the building runs, so the building keeps working while we do.
Fire-rated sealing for Streatley buildings
Streatley lies roughly 45 miles out from central London. Office refits around the commuter belt bring new cabling through fire-resisting walls, and the gaps need sealing with the specified product. Streatley has a number of hotels close by, all within 2 miles. A hotel refit often runs new services through compartment walls between bedrooms and corridors, and each opening needs the specified seal.
Older community buildings such as Church of St Mary that have been rewired or given new heating can have service gaps through walls worth checking against the specification. Hotels such as The Bull Hotel (under half a mile south-east of Streatley) rely on fire-resisting walls between bedrooms and corridors, and refits that add services leave penetrations to seal where fire-rated sealant is specified. For a school such as Streatley C.E. Voluntary Controlled School, penetration sealing fits best at the end of the summer works.
Streatley is about 7 miles south-east of Didcot, in West Berkshire. Looking for fire stopping in Streatley? We can help. Across West Berkshire, 140 places are covered, including Streatley. Reading is covered too, around 9 miles from Streatley.
Work on service penetrations is covered throughout RG8, for business premises of every kind. We cover commercial and managed buildings on High Street, Streatley Hill and The Bull Meadow. Nearby places we also cover include Goring (1 mile east), Lower Basildon (2 miles south-east), South Stoke (2 miles north), Moulsford (2 miles north) and Elvendon (2 miles east). A short drive away, we cover Newbury (11 miles south-west), Thatcham (9 miles south-west), Burghfield Common (9 miles south-east), Speenhamland (11 miles south-west), Fords Farm (8 miles south-east) and Little Heath (6 miles south-east).
Local landmarks in Streatley
In Streatley, that means premises near The Bull Hotel. For rail, the closest station is Goring & Streatley station, about 0.8 miles east. Well-known places in the area include Yattendon Castle (4.5 miles south-west). Open spaces near Streatley include Withymead Nature Reserve and Churn Hill.
Leave it or put it right?
It is cheaper to seal service penetrations as each services package finishes than to come back for them later. While the area is still open, every opening is easy to see and reach and each detail can be checked as we go. Converted and older buildings near places like Streatley tend to move, and aged sealant cracks. A sealant with the right movement capability, correctly sized, lasts far better.
Access can matter as much as the joints themselves: joints within easy reach take less time than ones that need access equipment. Tell us how the joints are reached and call for a quote.
Why clients in Streatley choose us
- Over 20 years of commercial sealing
- Public liability insurance in place
- One contact handling all your sites
- A fixed quote before work starts
FAQs: Streatley
Is Streatley off your patch?
No. Places such as Streatley are covered as much as the big towns. We cover Greater London and the counties of the South East. Good photographs up front let us bring everything on the first visit.
What happens to BS 476 references for fire stopping in Streatley?
References to BS 476 classes are being removed from Approved Document B from 2 September 2029, after which BS EN 13501-2 classification is the route, subject to transitional arrangements. The designer or fire engineer sets the specification, and we install the product to the manufacturer’s tested detail.
How long will the new sealant last?
There’s no fixed lifespan: movement, exposure, cleaning, traffic and the product all play a part. Sealant joints are maintenance items, so inspect them regularly.
Can the sealant be colour-matched?
Often, yes. Sealants are made in a wide range of standard colours, and matching to RAL references or nearby finishes is commonly requested. We confirm what’s available for the specified product when we quote.
Are you fully insured?
Yes. We are fully insured, and the certificate can go with your quote.
Are your applicators CSCS-carded?
Yes. Should the site need card details in advance, let us know and we’ll send them with the quote.
Can you fit around our working hours?
Mention the site’s hours and access windows in your enquiry, and we will plan around them. Our office runs Monday to Friday, 8am until 5pm.