Stratford St Mary fire stopping
Our CSCS-carded applicators take on fire-rated and intumescent sealing of service penetrations and linear gaps in Stratford St Mary. Send photographs or drawings for a fixed quote.
- Penetration schedules that need working through
- Openings left by services added after handover
- Openings found when ceilings come down for a refit
Fire stopping across Stratford St Mary
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Fire stopping in Stratford St Mary
Most of our fire stopping work happens after the building is up. New cable runs, replaced pipework and extra data routes all punch holes in compartment walls. We close the openings listed on your schedule, using the specified sealant and detail. We work on service gaps in risers, small duct penetrations where the tested detail allows and joints between fire-resisting walls and floors, and the failures we’re asked to look at most are penetration schedules that need working through and fire stopping installed outside its tested range. For commercial sealant work in Stratford St Mary, you deal with one contact from quote to sign-off, whether it’s one building or several.
Rural conversions around Stratford St Mary can put new fire-resisting partitions inside older structures. A penetration seal only performs as tested if product, substrate, service, gap and depth all match the detail.
We stand behind the joints we seal with a 12-month guarantee. It covers how we prepared and applied the sealant, and we come back if anything isn’t right.
- Location
- Stratford St Mary (CO7)
- Region
- Essex
- Guarantee
- 12 months on every job
- Price
- A fixed quote before we start
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
When to bring in a specialist
There’s also the paperwork. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and our CSCS-carded applicators are used to working under those rules.
Putting right a botched joint often costs more than sealing it well at the start, because the whole bead must be removed and the faces cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
Stratford St Mary: questions and answers
Is hospital work, at somewhere like Severalls Hospital, something you do?
Yes, healthcare and care buildings are part of our work. We follow the site’s permits, sign-in and infection-control procedures in every area.
Is a smaller place like Stratford St Mary outside your area?
Not at all: smaller places are covered as well as towns. Our area covers London and the South East counties. Good photographs up front let us bring everything on the first visit.
Can you seal any opening with fire-rated sealant?
No. Sealant is the right product only where the tested detail says so. Large openings, many plastic pipes and some ducts need collars, wraps, batts or boards, and we flag those rather than improvise.
What do you charge?
Every job gets its own fixed quote. To get one, speak to us on 01277 525 020 or send details through our quote form.
Can you fire stop behind the services contractors?
Yes. Send the schedule or marked-up drawings and the specified product details for a fixed quote. Work can run area by area behind the M&E trades keeping pace with the programme.
Will you sign off the seals for us?
No. Approval sits with the designer, principal designer or building control. We will confirm the products and details used and agree any further records when we quote.
Is fire stopping in Scotland covered by different guidance?
Our work covers Greater London, the South East and every Scottish council area. Scotland’s non-domestic Technical Handbook, clause 2.1.14, expects service penetrations to be fire stopped to at least the wall or floor’s fire resistance, using products tested for their end use.
Looking after the joints
After handover, a little attention goes a long way:
- Foam or ordinary sealant is never a fire-seal repair
- Put resealing into every M&E and fit-out package
- Look above ceilings when tiles are lifted for other jobs
- Report damaged or disturbed seals as soon as they’re spotted
Add risers, plant rooms and ceiling voids to routine fire-stopping checks. Look for cracks, unsealed new cables and gaps that have been enlarged.
Make reporting new openings part of every permit to work in service areas. It costs little and catches breaches early.
What the job involves on each surface
Cables and cable bundles
Single cables and small bundles are often within a fire-rated sealant’s tested detail. The detail limits bundle size and the gaps between and around cables, so we check before sealing.
Plastic pipes
Plastic pipes soften and collapse in a fire. Some intumescent sealants are tested on smaller plastic pipes. We check the pipe material and diameter against the detail before we start.
Fire stopping around Stratford St Mary: how the place shapes the job
Stratford St Mary lies roughly 56 miles out from central London. Office refits around the commuter belt bring new cabling through fire-resisting walls, and the gaps need sealing with the specified product. For England, the fire stopping of penetrations is dealt with in Approved Document B. References to the older BS 476 classes are being removed from it from 2 September 2029, after which the European classification, BS EN 13501-2, is the route, subject to transitional arrangements. We install whatever has been specified, to the product’s tested detail.
Office fit-outs on sites such as Langham Barns Business Centre, 2.8 miles south-west of Stratford St Mary, add cabling and pipework through fire-resisting walls, and fire-rated sealant goes in where the specification calls for it. In a building such as Church of St Mary, any service penetration through a fire-resisting wall should be sealed to the specified detail.
Stratford St Mary is about 6 miles north-east of Colchester, in Essex. Anywhere in CO7, the process is the same: send details, get a fixed quote, we seal, and the work is guaranteed. Stratford St Mary is one of 644 places in Essex on our list. London is covered too, around 56 miles from Stratford St Mary.
Anyone looking for fire stopping in CO7 gets the same process as the rest of our area: send details, get a quote, we seal, guaranteed. Streets here include The Street, Kenyon Close and Strickmere. Just outside Stratford St Mary, we also work in Higham (1 mile north-west), Dedham (1 mile south-east), Lamb Corner (2 miles south), Holton St Mary (2 miles north-east) and Hornestreet (2 miles south-west). Nearby towns on our patch include Colchester (6 miles south-west), Clacton-on-Sea (14 miles south-east), Harwich (13 miles east), Camulodunum (7 miles south-west), Halstead (15 miles west) and Greenstead (6 miles south).
Landmarks near Stratford St Mary
In Stratford St Mary, that means premises near East Bergholt High School and The Anchor pub and the streets around them. The closest station to Stratford St Mary is Manningtree station, about 3.3 miles south-east of the centre. Well-known places in the area include Severalls Hospital (5 miles south-west) and The Munnings Museum (1.7 miles south-east). For a walk, there’s Cattawade Marshes.
From enquiry to sign-off
Site rules come first: signing in, inductions and any permit to work. Once we’re cleared to begin, the joints are worked through in the order agreed with your site contact, and each area is checked before we leave it. Smaller jobs around Stratford St Mary can be grouped with others nearby. You will have a fixed quote before work starts.
- We read the specification, drawings or penetration schedule you send and ask about anything unclear.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- Mineral wool or other backing goes in wherever the detail asks.
- We apply the specified sealant to the depth and around the services as the detail shows.
- If an opening needs something other than sealant, we tell you instead of improvising.
Before we start on site
- Clear stock, furniture or equipment away from the joints
- Let us know about inductions and permits
- Tell us your opening times and when work is allowed
Request a quote
A handful of photos and a postcode is the fastest way to a quote. Upload them with the quote form, or give us a call on 01277 525 020 or email the details over if you’d rather talk the job through.
Related advice
When to call us in Stratford St Mary
Most open service penetrations are left by later work. A new cable pulled by an electrician, a pipe rerouted by a plumber or a data run drilled through a riser can leave the hole behind. Across several fit-outs, the openings add up.
These are often picked up first by site or facilities staff:
- Service penetrations left open after M&E works
- Builders’ foam or ordinary silicone in compartment walls
- Fire-stopping items raised at inspection or handover
- Unsealed joints where partitions meet the slab
Schools such as Stratford St Mary Primary School often have new data and services installed during holidays, and penetrations through fire-resisting walls should be checked afterwards.
Comparing quotes
- Do they follow the manufacturer’s priming guidance?
- Their plan for phasing and protecting the area
- Will RAMS and insurance details be available?
- How joint depth will be controlled
Nearby places to Stratford St Mary
More services for Stratford St Mary
Owners, agents and contractors
Main contractors use us as their sealant subcontractor on new-build and refurbishment projects. We work to your programme, your specification and your site rules, and our applicators hold CSCS cards.
Facilities managers want contractors who arrive with the paperwork sorted. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we will confirm with the quote.