Fire stopping in Singleton
Fire-rated and intumescent sealing of service penetrations and linear gaps throughout Singleton and nearby, by CSCS-carded applicators. CHAS accredited and fully insured.
- Openings left by services added after handover
- Old intumescent sealant that has split away
- Builders’ foam or ordinary silicone in compartment walls
Fire stopping across Singleton
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Fire stopping for commercial buildings in Singleton
Sealant is the specified answer for plenty of openings, such as metal pipes, cables and some small ducts where the detail covers them. Other openings need collars, wraps, batts, pillows or boards. If the detail calls for something other than sealant, we say so rather than force sealant into it. Site teams most often ask us about seals that don’t match their tested detail and expanding foam used as fire stopping, on linear gaps at wall heads, pipe penetrations and small duct penetrations where the tested detail allows. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, the work in Singleton is the same: failed joints cut out, faces prepared and the right sealant laid to the right depth.
Smaller places such as Singleton still have buildings with fire-resisting walls and floors: schools, halls, care homes and commercial conversions. Any service penetration through those walls should be closed with the specified product, set out as its test evidence shows.
What our 12-month guarantee covers is the way we did the job: the preparation, the sealing and the tooling. It doesn’t extend to damage, other trades’ later work or movement the joint was never designed to take.
- Where
- Singleton (PO18)
- Region
- West Sussex
- Cover
- 12 months on every job
- Quote
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Updated
- 3 November 2026
Do you need fire stopping in Singleton?
Plenty of openings were simply never closed, often hidden above suspended ceilings or behind boxing. Inspections, refurbishments and ceiling access usually bring them to light.
These are often picked up first by site or facilities staff:
- Hidden openings found during inspections
- Old intumescent sealant that has split away
- Penetration schedules that need working through
- Expanding foam used as fire stopping
Campus buildings at universities such as University of Chichester, 4.6 miles to the south of Singleton, see constant changes to data and services, and fire-rated sealant goes in around new penetrations where it is specified.
Comparing quotes
- How the joint faces will be prepared and primed
- Their approach to joint depth and backing
- Health and safety accreditation such as CHAS
- The named product and why it was chosen
What affects the price in Singleton
These are the things that shape the price:
- Any access equipment needed
- The site’s rules and procedures
- Joint width, depth and condition
- Quantities, in metres or numbers
What a job costs comes down to the quantity of joints, what has to come out first and how the joints are reached. Call for a quote when you’re ready.
What we need to price the job
For an accurate fixed quote, we need a clear picture of the site. Useful things to include:
- Access details, including height
- Any dates the work must fit around
- What the building is and how it’s used
- A wide shot and a close-up of the area
The quickest route to a quote is a few photos and the site postcode. Send them through the quote form, or phone 01277 525 020 or use the quote form if you’d rather talk the job through.
On site: what to expect
When we get to site, we report to your site contact and complete whatever induction the building runs. Floors, finishes and fittings next to the joints are covered before any cutting starts, and the work normally takes a single visit for a short list of penetrations, or a phased programme for a whole building. Rural sites near Singleton may need directions, gate codes or a contact on site. Add it to your enquiry and we will build it into the plan.
- We read the specification, drawings or penetration schedule you send and raise any questions before we price.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Unsuitable fillers and loose debris are taken out of each opening.
- Mineral wool or other backing goes in wherever the detail asks.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- If an opening needs something other than sealant, we tell you instead of improvising.
Getting the site ready
- Clear stock, furniture or equipment away from the joints
- Explain the parking and delivery arrangements
- Have the specification and drawings to hand
Quotes
Tell us about the building, the joints and when you need the work done, and we’ll put a fixed quote together. To get it moving, speak to us on 01277 525 020 or email drawings and photos.
Read more
What else we do in Singleton
Singleton: questions and answers
Will you plan work around the academic year at somewhere like University of Chichester?
Yes, holiday working periods are the norm on campus jobs. Any paperwork you need, from RAMS to our insurance certificate and CSCS details, is confirmed with the quote.
Would you work within a site like Chichester Centre?
Yes, hospitals are one of the sectors we cover. Before anything starts, the estates team agrees permits, inductions and infection-control measures with us.
Can weather delay the job?
Outside, yes. The joint has to be dry and within the product’s temperature range, so damp, frosty or very cold days can stop external work. Internal work is rarely affected.
What if there’s asbestos in the old mastic?
Some older mastics, especially in pre-2000 buildings, can contain asbestos. Before we disturb old sealant in an older building, we ask to see the asbestos register or survey, and if asbestos is suspected, work stops until it’s tested. We don’t remove asbestos-containing materials.
Is the BS 476 change in 2029 relevant to fire stopping?
For buildings in England, Approved Document B removes BS 476 references from 2 September 2029. Classification to BS EN 13501-2 becomes the expected evidence. Scotland follows its own Technical Handbook, with clause 2.1.14 covering service penetrations.
Will you write the fire-stopping specification?
No, that isn’t our role. With the designer’s details in hand, we can price the sealant elements.
Do you work in Singleton?
Yes. Singleton falls within our area, and the simplest way to start is to phone 01277 525 020 or send photos by email.
When something else is needed
Before quoting, we check that sealant is the right answer. It won’t put right:
- Fire risk assessments, a job for a competent assessor
- Designing or specifying fire stopping, which sits with the designer or fire engineer
- Approving the work on behalf of building control
If in doubt, phone 01277 525 020 or email us and we will say what we think.
Joints and surfaces we work on
- Cable penetrations
- Joints between fire-resisting walls and floors
- Service gaps in risers
- Linear gaps at wall heads
- Pipe penetrations
- Small duct penetrations where the tested detail allows
Fire stopping around Singleton: how the place shapes the job
Approved Document B is the English guidance that covers fire stopping around openings and penetrations. Its BS 476 references are being withdrawn from 2 September 2029, with BS EN 13501-2 classification taking over, subject to transitional arrangements. Either way, we install the specified product to its tested detail. At about 50 miles from central London, Singleton is within reach of the capital. Offices around the capital are refitted often, and the cabling that follows can breach fire-resisting walls.
For a hotel such as Woodstock House Hotel, 0.5 miles east of Singleton, penetration seals are worth checking after any refit or services upgrade. Theatres, wards and plant rooms at sites like Chichester Centre (4.5 miles south of Singleton) all have compartment walls crossed by services.
Singleton is about 5 miles north of Chichester, in West Sussex. Anywhere in PO18, the process is the same: send details, get a fixed quote, we seal, and the work is guaranteed. Our West Sussex coverage takes in 373 places, large and small. Sites around Portsmouth have their own page, about 16 miles away.
We take on service penetrations across the PO18 postcode area, whatever the building. Streets here include Downley Close, The Leys and Charlton Road. We also cover Charlton (1 mile east), West Dean (1 mile west), East Dean (2 miles east), Cocking (3 miles north) and Heyshott (3 miles north-east) for service penetrations. Bigger towns within reach include Bognor Regis (9 miles south), Chichester (5 miles south), Selsey (12 miles south), Littlehampton (12 miles south-east), Rustington (13 miles south-east) and Storrington (13 miles east).
What’s near Singleton
We work on buildings around The Partridge Inn. Well-known places in the area include Weald and Downland Gridshell (less than half a mile south-west) and Chichester Centre (4.5 miles south). Open spaces near Singleton include Levin Down and Kingley Vale National Nature Reserve.
Owners, agents and contractors
If you look after buildings for someone else, you need clear quotes and clear reporting. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative, plus a 12-month guarantee.
Housing associations and managing agents often need work done across blocks and communal areas. Work can be phased so residents and staff keep access throughout, with each stage agreed with your site contact.
Different surfaces, different methods
Metal pipes
Sealant details often cover copper and steel pipework. The tested detail sets the pipe size range, gap, depth and whether insulation can stay on, so we check each one.
Small ducts
Ducts are only sealed with sealant where the detail allows it. The ductwork, its supports and any dampers are for the ductwork contractor.