Fire stopping in Shiskine
Need fire stopping in Shiskine? It’s simple: send details, get a quote, we seal, guaranteed.
- Damaged fire seals in risers and voids
- Unsealed joints where partitions meet the slab
- Fire-rated sealant that has cracked or shrunk back
Fire stopping in Shiskine
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
About our fire stopping in Shiskine
A lot of fire-stopping work comes after M&E installation, a refit or a tenant fit-out. New cable runs, replaced pipework and extra data routes all punch holes in compartment walls, often unnoticed. We close the openings listed on your schedule, using the specified sealant and detail. The enquiries we see most involve seals that don’t match their tested detail and unsealed joints where partitions meet the slab, across linear gaps at wall heads, joints between fire-resisting walls and floors and cable penetrations. A single leaking joint is often how a building in Shiskine first comes to us: we check the joints around it and give you an honest view of what needs doing now and what can wait.
Travel to smaller places like Shiskine is planned so every penetration is sealed on one trip. Send the specification and photographs of the openings, with sizes if you have them.
The 12-month guarantee covers our workmanship: the preparation, the sealing and the tooling. It doesn’t extend to damage, other trades’ later work or movement the joint was never designed to take.
- Where
- Shiskine (KA27)
- Wider area
- North Ayrshire
- Guarantee
- 12 months on every job
- Price
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Surface by surface
Cables and cable bundles
New data and power cables are the most common breach we see. We reseal around them to the specified detail.
Drylining partitions
Drylined fire walls are tested in a particular build-up. The sealant detail has to be tested in that wall type, with the stated board layers before sealing.
Compartment walls and floors in Shiskine
Scottish guidance (non-domestic Technical Handbook, clause 2.1.14) asks that penetrations match at least the fire resistance period of the element they pass through, with products tested for that end use. Where fire-rated sealant is specified, that’s what we install, to the tested detail.
Buildings near Shiskine get the fire-rated product that’s specified, installed to its tested detail.
Shiskine is about 22 miles west of Saltcoats, in North Ayrshire. We cover Shiskine, with the same fixed quotes and 12-month guarantee as everywhere else. 54 places across North Ayrshire fall within our area, including Shiskine. For work in that direction, see our Glasgow page (46 miles or so).
We take on service penetrations across the KA27 postcode area, for business premises of every kind. For a building on Ladeside Terrace, The String and Ladeside Place or nearby, we can quote for service penetrations. Just outside Shiskine, we also work in Birchburn (1 mile south-west), Pien (1 mile north-east), Torbeg (1 mile south-west), North Feorline (1 mile south-west) and Blackwaterfoot (2 miles south-west). Island and remote sites need extra planning, with travel, ferry crossings where needed and weather to allow for, so mention the location when you speak to us on 01277 525 020 or send details through our quote form.
What’s near Shiskine
Open spaces near Shiskine include Àrd Bheinn and Loch Iorsa.
FAQs: Shiskine
Will you design a fire-stopping scheme for our building in Shiskine?
No. The designer or fire engineer sets the detail and building control accepts it. Our part is installing the specified product to its tested detail, and telling you if the detail calls for something other than sealant.
How do Scotland’s building standards affect fire-rated sealant in Shiskine?
The non-domestic Technical Handbook, clause 2.1.14, expects a penetration to keep at least the wall or floor’s fire resistance period, with proprietary products tested for the use they’re put to. We install what has been specified, to the manufacturer’s tested detail, while design and approval sit with the designer and the verifier.
Is Shiskine in your area?
Yes. We cover Shiskine. To discuss a job, ring 01277 525 020 or email drawings and photos.
Which sealant will you use?
If the job is specified, we follow the specification. If not, we choose for the movement, the surfaces and the conditions, in line with the manufacturer’s guidance.
Can staff carry on working while you’re here?
Yes, as long as we plan it. We agree a sequence with your contact so just one area at a time is disrupted.
Will you quote for a small job?
Small jobs are welcome alongside larger packages. Send details for a fixed quote.
Can you work to our specification?
Yes. We follow the specification, along with the manufacturer’s installation guidance, and any queries are raised before we start.
What sets the cost
Quotes vary with the job. It mainly depends on:
- Backing rod, priming and other preparation
- Travel to remote or island sites
- Which sealant the job calls for
- Removal of failed or old sealant
The price depends on the quantity of joints, how much old material needs removing and the access. Call for a fixed quote when you are ready.
Details that help us quote
To price the job accurately, we need to understand the site. Useful things to include:
- Approximate linear metres or a joint schedule
- Any specification or named product
- The type of building and who uses it
- The postcode of the building
Every quote starts with the facts: the joints involved, quantities, access and the product called for. Send what you have, and we’ll arrange a site visit if anything is unclear.
When it isn’t the sealant
Some faults sit outside our scope, and we say so rather than covering them up:
- Reviewing a building’s overall fire safety
- Walls or floors that aren’t fire-resisting to begin with
- Approving the work on behalf of building control
If you’re not sure, just call 01277 525 020 or send photos by email and we will give you a straight answer.
What we seal
- Pipe penetrations
- Small duct penetrations where the tested detail allows
- Linear gaps at wall heads
- Joints between fire-resisting walls and floors
- Cable penetrations
- Service gaps in risers
Leave it or put it right?
It is cheaper to seal service penetrations as each services package finishes than to come back for them later. While the area is still open, every opening is easy to see and reach. Exposed buildings in Scotland take a lot of weather, so it’s worth renewing joints around Shiskine before they leak.
Small jobs and large programmes are priced from the same things: scope, access, product and programme. Call for a quote, and you’ll have a fixed figure to work with.
Why choose Mastic Doctor in Shiskine
- Old sealant cut out, never sealed over
- Work carried out by CSCS-carded applicators
- CHAS accredited
- Sealing commercial buildings since 2005
Take a look at what affects the cost or our accreditations.
Also near Shiskine
Other services in Shiskine
On site: what to expect
When we get to site, we sign in, go through any site induction and check how permits are handled. Floors, finishes and fittings next to the joints are covered before any cutting starts, with the work itself typically taking longer where risers, ceiling voids or occupied floors have to be worked through in sequence. For a building near Shiskine, directions, keys and a contact on the day are worth sorting early. We’ll confirm the plan with the fixed quote.
- First we go through the drawings, schedule or specification for the seals.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- Mineral wool or other backing goes in wherever the detail asks.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
What we need from you
- Have the specification and drawings to hand
- Share your working hours and any access restrictions
- Arrange parking or a loading space
Request a quote
For a fixed quote, phone 01277 525 020 or email the details over. You can also send details through our quote form.
Related advice
When to call us in Shiskine
Fire stopping can get squeezed at the end of a programme, or done by whoever is on site. That is when untested combinations creep in, which then have to be put right.
Common reasons buildings call us in:
- Openings left by services added after handover
- Openings found when ceilings come down for a refit
- Fire-stopping items raised at inspection or handover
- Unsealed joints where partitions meet the slab
For a building such as St Molios Church, new heating or data runs are the usual reason penetrations need sealing.
Comparing quotes
- Their plan for phasing and protecting the area
- Proof of insurance
- How the existing material will be dealt with
- How joint depth will be controlled