Red Post Bridge fire stopping
Looking for fire stopping in Red Post Bridge? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Seals disturbed by maintenance and left open
- Hidden openings found during inspections
- Fire stopping installed outside its tested range
Fire stopping across Red Post Bridge
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Signs you need fire stopping in Red Post Bridge
Some service penetrations were never sealed at all because they sat out of sight above a ceiling or inside a riser. Inspections, refurbishments and ceiling access usually bring them to light.
Site and facilities staff are often the first to spot these:
- Openings found when ceilings come down for a refit
- Service penetrations left open after M&E works
- Expanding foam used as fire stopping
- Old intumescent sealant that has split away
For a building at a site such as Plot 5 Andover Business Park, which lies north-east of Red Post Bridge, a check of penetration seals after each fit-out is good practice.
Before you book anyone
- How the existing material will be dealt with
- Will RAMS and insurance details be available?
- Do they follow the manufacturer’s priming guidance?
- Their plan for phasing and protecting the area
Fire stopping for commercial buildings in Red Post Bridge
It helps to set out our role at the start. The designer, fire engineer or building control decides which fire stopping is required; sign-off sits with them too. What we bring is careful installation of the specified sealant, to the maker’s guidance on sites in Red Post Bridge. The enquiries we see most involve seals that don’t match their tested detail and open linear gaps along the top of fire-resisting walls, on small duct penetrations where the tested detail allows, service gaps in risers and cable penetrations. Facilities teams, main contractors and managing agents in Red Post Bridge tend to want the same three things: a clear scope, tidy work and joints that don’t fail again.
A job near Red Post Bridge is usually planned around one visit, so send the specification and photos first. Design and sign-off belong to the designer or building control; we install what’s specified.
What our 12-month guarantee covers is the way we did the job: preparation, application and finish. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
- Place
- Red Post Bridge (SP11)
- Region
- Hampshire
- Cover
- 12 months on every job
- Quote
- Quoted before any work starts
- Call
- 01277 525 020
- Page updated
- 3 November 2026
Fire stopping around Red Post Bridge: points for this area
At about 65 miles from central London, Red Post Bridge is within reach of the capital. Offices around the capital are refitted often, and the cabling that follows can breach fire-resisting walls; the gaps need the specified seal. The 2 miles around Red Post Bridge include two care or nursing homes. Where new services have gone through compartment walls in a care setting, the gaps need the specified product. We install fire-rated sealant to the tested detail where it is specified.
Theatres, wards and plant rooms at sites like Andover War Memorial Hospital (2 miles north-east of Red Post Bridge) all have compartment walls crossed by services. Workshops and IT rooms at colleges like Andover College, 2.4 miles east of Red Post Bridge, are re-serviced often, leaving penetrations to seal.
Red Post Bridge is about 2 miles west of Andover, in Hampshire. Red Post Bridge sits inside our coverage, with the same fixed quotes and 12-month guarantee as everywhere else. Red Post Bridge is one of 723 places in Hampshire on our list for service penetrations. We also cover Southampton, some 21 miles away.
We take on service penetrations across the SP11 postcode area, for business premises of every kind. Streets here include Newall Road, Andover Road and Red Post Lane. Nearby places we also cover include Penton Corner (1 mile north), Weyhill (1 mile north-west), Penton Grafton (1 mile north), Penton Mewsey (2 miles north) and East Cholderton (2 miles west). Further afield, our area takes in Winchester (14 miles south-east), Romsey (15 miles south), Hyde (13 miles south-east), Tidworth (6 miles north-west), Weeke (13 miles south-east) and Stanmore (14 miles south-east).
Local landmarks in Red Post Bridge
In Red Post Bridge, that means premises near The Black Swan Public House and the streets around them. The closest station to Red Post Bridge is Andover station, roughly 1.9 miles east of the centre. Nearby you’ll also find Andover Museum (2.6 miles east) and Andover War Memorial Hospital (2 miles north-east). The countryside around Red Post Bridge includes Mill Lake and Anton Lakes.
Towns and villages near Red Post Bridge
More services for Red Post Bridge
Aftercare for building managers
To get the most from the new sealant:
- Brief every trade that openings they make must be sealed
- File the specified details where the next contractor can find them
- Check with the data sheet before painting over fire sealant
- Don’t let anyone top up a fire seal with the wrong product
After the work, brief anyone else working in the area that the openings are now sealed. Any seal cut back for a new service needs reinstating to its tested detail using the same product.
Make reporting new openings part of every permit to work in service areas. It costs little and catches breaches early.
Your questions answered
Does your area include sites such as Plot 5 Andover Business Park, near Red Post Bridge?
Yes. Our area takes in Red Post Bridge and its surroundings, with estates and business parks such as Plot 5 Andover Business Park included. A few photos and the unit address let us price the work.
Will you plan work around the academic year at somewhere like Andover College?
Yes, holiday working periods are the norm on campus jobs. We’re CHAS accredited and a Constructionline member, and paperwork such as RAMS is confirmed with the quote.
What if there’s asbestos in the old mastic?
Some older mastics, especially in pre-2000 buildings, can contain asbestos. Before we disturb old sealant in an older building, we ask to see the asbestos register or survey, and if asbestos is suspected, work stops until it’s tested. Removing asbestos is a job for asbestos specialists, not us.
What changes on 2 September 2029?
For buildings in England, Approved Document B removes BS 476 references from 2 September 2029. Classification to BS EN 13501-2 becomes the expected evidence, subject to transitional arrangements. Scotland follows its own Technical Handbook, with clause 2.1.14 covering service penetrations.
Is any job too small?
Single areas, one-off repairs and whole buildings are all quoted the same way: details, then a fixed price, then sealing, then a 12-month guarantee.
How long does a job like this take?
It depends on the scope, but the work usually takes longer where risers, ceiling voids or occupied floors have to be worked through in sequence. For bigger or phased jobs, we will set out a timescale with the quote.
What about RAMS and site documents?
Requirements differ from site to site, so tell us what you need and we’ll confirm it when we quote.
On site: what to expect
We follow your site rules from the start: signing in, inductions and any permit to work. With the paperwork done, the joints are worked through in the order agreed with your site contact, and each area is checked before we leave it. For a building around Red Post Bridge, tell us how to find it and who will meet us. Add it to your enquiry and we will build it into the plan.
- We read the specification, drawings or penetration schedule you send and raise any questions before we price.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- We fit the backing the detail asks for, to the stated depth.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
Preparing the site
- Explain the parking and delivery arrangements
- Send your site hours and access windows
- Move anything stored against the joints
Quotes
A good quote starts with a clear picture: the joints involved, quantities, access and the product called for. Send what you have, and we’ll arrange a site visit if anything is unclear.
Read more
For managing agents and facilities managers
Facilities managers want contractors who arrive with the paperwork sorted. Let us know the documents you need (RAMS, insurance certificate, CSCS details) and we’ll confirm them with the quote.
Housing associations and managing agents often need work done across blocks and communal areas. Work can be phased so residents and staff keep access throughout, and each stage is agreed with your contact.
Why act early in Red Post Bridge
The longer openings stay, the more there tend to be: every new cable or pipe adds another. Keeping on top of it after each round of works keeps the job small. Converted and older buildings near places like Red Post Bridge tend to move, and aged sealant cracks. The right product, sized to the joint, copes much better.
The product called for affects the cost, and so does the preparation, from cutting out to priming and backing rod. Access, phasing and site requirements come into it too.
Why clients in Red Post Bridge choose us
- CHAS accredited
- 12 months’ guarantee on every job
- A Constructionline member, so easy to vet
- A fixed quote before work starts
See how commercial sealant jobs are priced or our accreditations and insurance.
What affects the price in Red Post Bridge
To price the job, we consider:
- How much existing material needs removing
- Which sealant the job calls for
- Location, for remote and island sites
- Working within restricted access windows
What a job costs comes down to how many linear metres there are, how much old material needs removing and the access. Call for a fixed quote when you are ready.
What to include in your enquiry
There’s no need for a formal survey. These details are enough to start:
- The type of building and who uses it
- Photos of the joints, close up and from further back
- How the joints are reached, and at what height
- Approximate linear metres or a joint schedule
If there’s a specification, drawings or a tender package, send it with your enquiry, and we’ll price the work to it. Smaller jobs need nothing more than photographs and a few notes.