Fire Stopping in Ramsey
Looking for fire stopping in Ramsey? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Expanding foam used as fire stopping
- Head-of-wall gaps with no fire seal
- Improvised or mixed-product fire seals
Fire stopping across Ramsey
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
What we’re called out for in Ramsey
Mixing products or improvising a detail breaks the link with the test evidence. Gaps beyond the tested size, shallow sealant, no backing where it was needed, or products from different systems mixed together are the usual culprits.
Things that usually lead to an enquiry:
- Old intumescent sealant that has split away
- Fire seals cut back for extra cables and never reinstated
- Openings left by services added after handover
- Seals that don’t match their tested detail
Large healthcare estates like Fryatt Hospital, 1.9 miles east of Ramsey, change their services often, so penetration seals are worth checking after M&E work.
Comparing quotes
- Health and safety accreditation such as CHAS
- Their plan for phasing and protecting the area
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
- Whether their applicators hold CSCS cards
How we handle fire stopping in Ramsey
Where pipes, cables and other services cross a compartment wall or floor, the opening around them has to be closed so fire and smoke can’t move between compartments. Our part is installing fire-rated and intumescent sealant at those openings and along linear gaps, where the specification calls for it. We work to the product’s tested detail for every seal, not a rule of thumb. We work on small duct penetrations where the tested detail allows, linear gaps at wall heads and cable penetrations, and the usual reasons a site gets in touch are builders’ foam or ordinary silicone in compartment walls and improvised or mixed-product fire seals. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: in Ramsey, that means joint design, primers and backing rod as standard.
Around smaller places like Ramsey, penetration seals come up in schools, halls, pubs with rooms, care homes and farm buildings used as offices. Any service penetration through those walls should be closed with the specified product, set out as its test evidence shows.
Whoever the client is, the cover is the same: twelve months on the work we carried out. It doesn’t extend to damage, faults in the building or work by others, and we’re upfront about that.
- Place
- Ramsey (CO12)
- Region
- Essex
- Cover
- A 12-month guarantee
- Quotes
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Updated
- 3 November 2026
Cost factors for service penetrations
These are the things that shape the price:
- The site’s rules and procedures
- Joint width, depth and condition
- How accessible the joints are
- Distance, for remote addresses
Larger quantities, tricky access or phasing all shape the price. So do site requirements such as inductions and permits.
What to include in your enquiry
Whether it’s one area or a whole building, these details speed things up:
- Whether an asbestos survey exists
- A wide shot and a close-up of the area
- The postcode of the building
- The type of building and who uses it
A handful of photographs and a postcode is the fastest way to a quote. Send them through the quote form, or call the office on 01277 525 020 or send details through our quote form to discuss it first.
Fire-rated sealing for Ramsey buildings
In England, Approved Document B covers fire stopping of openings and penetrations. The national BS 476 classes are due to drop out of it from 2 September 2029, leaving the European BS EN 13501-2 route, subject to transitional arrangements. Our part stays the same: the specified product, installed to its tested detail. Ramsey lies roughly 63 miles out from central London. Offices around the capital are refitted often, and the cabling that follows can breach fire-resisting walls.
In a building such as Parish Church of St Michael, any service penetration through a fire-resisting wall should be sealed to the specified detail. Holiday works at schools like Harwich and Dovercourt High School often leave service openings to seal before pupils return.
Ramsey is about 2 miles west of Harwich, in Essex. Looking for fire stopping in Ramsey? We can help. 644 places across Essex fall within our area, Ramsey among them. London is covered too, some 63 miles away.
Commercial sites across CO12 are covered. Buildings on The Street, Main Road and Windmill View are within our area for service penetrations. Just outside Ramsey, we also work in Little Oakley (1 mile south), Parkeston (2 miles north-east) and Harwich (2 miles east). Nearby towns on our patch include Colchester (14 miles west), Clacton-on-Sea (9 miles south), Camulodunum (15 miles west), Greenstead (12 miles west), Wivenhoe (12 miles south-west) and Brightlingsea (11 miles south-west).
What’s near Ramsey
We work on buildings around The Castle pub and the streets around them. The nearest railway station is Wrabness station, about 2.1 miles north-west. A little further out are Harwich Museum (3.2 miles east) and Landguard Fort (4.5 miles east). The countryside around Ramsey includes Copperas Wood.
Also near Ramsey
More services for Ramsey
Questions about Ramsey
Is Ramsey too small for you to travel to?
Not at all. Ramsey is within our area. Our area covers London and the South East counties. Good photos up front let us bring everything on the first visit.
Can you work on a hospital site such as Fryatt Hospital?
Yes. Healthcare sites are among the places we work. We follow the site’s permits, sign-in and infection-control procedures in every area.
Will you just go over the old sealant?
No, never. Overlaying old sealant is a frequent cause of early failure, so it all comes out first.
Are you fully insured?
Yes. We are fully insured, including public liability cover.
Will you come and look before quoting?
Many jobs can be quoted from photographs, drawings or a joint schedule. If the job needs a look first, we will arrange a visit before quoting.
Is sealant suitable for all service openings?
No. Each fire-rated sealant is tested for particular services, gap sizes and substrates. Outside that, a different product is needed.
Do you hold third-party fire-stopping installer certification?
No, and we won’t imply otherwise. Third-party schemes aren’t a legal requirement, but many clients and main contractors ask for them, so it’s worth checking what your contract says. Where it isn’t required, we install the specified sealant to the maker’s details.
When it isn’t the sealant
Not every problem is a sealant problem, and we’d rather tell you before you spend money. These need a different solution:
- Large openings beyond what any sealant detail covers
- Reviewing a building’s overall fire safety
- Gaps in walls that were never built as compartment walls
If you’re not sure, just call 01277 525 020 or send photos by email and we’ll give you a straight answer before you book.
Surfaces we seal
- Small duct penetrations where the tested detail allows
- Linear gaps at wall heads
- Cable penetrations
- Joints between fire-resisting walls and floors
- Service gaps in risers
- Pipe penetrations
From enquiry to sign-off
Where the site stays busy, the work is phased so only one area is out of use at a time. Each section is protected, cleaned back and sealed before we move to the next. For a building around Ramsey, tell us how to find it and who will meet us. Add it to your enquiry and we will build it into the plan.
- We ask for the product and detail your designer has specified.
- Openings are measured and grouped by detail.
- Old or wrong materials are cut out.
- Where the detail needs backing, it goes in at the stated depth.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- We walk the completed areas with you and confirm the records agreed at quote stage.
Before we start on site
- Share your working hours and any access restrictions
- Make sure the joints can be reached
- Let us know about inductions and permits
Ask for a quote
We quote a fixed sum against the scope you give us, so you know the figure before anyone is on site. To ask for one, ring 01277 525 020 or email drawings and photos.
Related advice
Site staff or a sealant specialist?
A short, simple internal joint is often within reach of a maintenance team. The usual problems come from preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
Paperwork matters too. Many sites expect CSCS cards, RAMS and proof of insurance, and our CSCS-carded applicators are used to working under those rules.
Surface by surface
Cables and cable bundles
Single cables and small bundles are often within a fire-rated sealant’s tested detail. The detail limits bundle size and the gaps between and around cables, so we check before sealing.
Risers and ceiling voids
Risers and ceiling voids hold most of a building’s service penetrations. Access is often tight, so we agree it with you in advance.