Fire Stopping in Pilgrims Hatch
Our CSCS-carded applicators take on fire-rated and intumescent sealing of service penetrations and linear gaps in Pilgrims Hatch and the surrounding area. Send photos or drawings for a fixed quote.
- Snag lists that include open service penetrations
- Seals that don’t match their tested detail
- Unsealed joints where partitions meet the slab
Fire stopping for businesses in Pilgrims Hatch
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Fire stopping for commercial buildings in Pilgrims Hatch
Penetration seals are fire tested to BS EN 1366-3 and linear joint seals to BS EN 1366-4. That classification, such as EI 60 or EI 120, belongs to the product in its tested arrangement. Reproducing the tested arrangement on site is the part we take care of. Most enquiries involve open linear gaps along the top of fire-resisting walls and fire-stopping items raised at inspection or handover, across joints between fire-resisting walls and floors, small duct penetrations where the tested detail allows and service gaps in risers. One point of contact handles commercial sealant work in Pilgrims Hatch from the first photos to the final walk-round, for single jobs and planned programmes alike.
Around Pilgrims Hatch, penetration and linear seals tend to be one-building jobs. With the specification and photographs of the gaps, we can give a fixed quote and bring the right products.
Whoever the client is, the cover is the same: twelve months on the work we carried out. It doesn’t extend to damage, faults in the building or work by others, and we are upfront about that.
- Where
- Pilgrims Hatch (CM15, CM14)
- Region
- Essex
- Guarantee
- 12 months on every job
- Quote
- A fixed quote before we start
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Fire stopping around Pilgrims Hatch: what changes locally
Pilgrims Hatch lies roughly 19 miles out from central London. Office refits around the commuter belt bring new cabling through fire-resisting walls; the gaps need the specified seal. Pilgrims Hatch has a number of hotels close by, all within 2 miles. Bedroom-to-corridor walls in hotels are normally fire-resisting, so new cabling or pipework through them has to be sealed to the tested detail.
At a healthcare site like Nuffield Hospital, which lies south-east of Pilgrims Hatch, new services through compartment walls are a constant, and each needs the specified seal. In a school such as Larchwood Primary School, fire-rated sealant goes in around service penetrations where it is specified.
Pilgrims Hatch is about 1 mile north-west of Brentwood, in Essex. Any commercial site in Pilgrims Hatch is covered, for single jobs and planned programmes alike. Pilgrims Hatch is one of 644 places in Essex on our list. Our London page has more on work in that area.
Anyone looking for fire stopping in CM15 and CM14 gets the same process as the rest of our area: send details, get a quote, we seal, guaranteed. If your site is on Ongar Road, Hatch Road and Green Lane or close by, we can quote for service penetrations. If your building is just outside Pilgrims Hatch, we cover Crow Green (1 mile north), South Weald (1 mile south-west), Coxtie Green (1 mile west), Bentley (1 mile north-west) and Doddinghurst Common (2 miles north-west). Bigger towns within reach include Chelmsford (11 miles north-east), Basildon (8 miles south-east), Harlow (12 miles north-west), Canvey Island (15 miles south-east), Billericay (6 miles east) and Rayleigh (14 miles east).
Landmarks near Pilgrims Hatch
Recent enquiries here include premises near Black Horse Inn, Sawyers Hall College and Weald Country Park and the streets around them. Pilgrims Hatch’s nearest station is Brentwood station, roughly 1.6 miles south. Other landmarks nearby include Brentwood Community Hospital (1.4 miles south-east). Open spaces near Pilgrims Hatch include Thorndon Park.
Site staff or a sealant specialist?
General builders and handymen seal joints, but it isn’t their main trade. A specialist prepares properly, controls joint depth and picks a product with the right movement class.
The visible bead is only part of the job. Correct depth, the right primer and a sealant matched to the movement are easy to get wrong without experience.
On site: what to expect
The first thing on site is a walk round with your contact, to confirm the scope, the order of work and any areas we must keep clear. Then we strip out anything that has failed, prepare every joint and seal it. Work in places the size of Pilgrims Hatch is planned as a single visit where we can. Clear photographs and measurements help us bring the right products.
- We ask for the product and detail your designer has specified.
- We sort the openings by the detail each one needs.
- Old or wrong materials are cut out.
- Where the detail needs backing, it goes in at the stated depth.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- Completed areas are checked with you, with the records agreed when we quoted.
Getting the site ready
- Send asbestos survey details if the building is pre-2000
- Confirm the product named in the specification
- Let building users know which areas are affected
Quotes
To get a fixed quote, speak to us on 01277 525 020 or send details through our quote form with the site address and an outline of the work. You can also send details through our quote form.
Advice
Do you need fire stopping in Pilgrims Hatch?
Physical damage is another reason seals stop doing their job. Maintenance work can knock a seal, cut it back for an extra cable or remove it with an old pipe.
Look out for the following:
- Open linear gaps along the top of fire-resisting walls
- Damaged fire seals in risers and voids
- Service penetrations left open after M&E works
- Fire stopping installed outside its tested range
Office fit-outs on sites such as Warley Hill Business Park, 2.2 miles south of Pilgrims Hatch, add cabling and pipework through fire-resisting walls, and fire-rated sealant goes in where the specification calls for it.
Questions to ask before you book
- The named product and why it was chosen
- Whether primer will be used where the manufacturer specifies it
- How the existing material will be dealt with
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
Questions about Pilgrims Hatch
Can you work at a site such as Warley Hill Business Park, by Pilgrims Hatch?
Yes. Estates, retail parks and business parks around Pilgrims Hatch, Warley Hill Business Park among them, are all within reach. Send details of the unit and the work through our quote form for a quick quote.
Is Pilgrims Hatch off your patch?
No. Small places get the same service as large ones. We cover Greater London and the counties of the South East. Good photos up front let us bring everything on the first visit.
Will you write the fire-stopping specification?
No, that isn’t our role. Once you have a specification, we can price and install the sealant elements of it.
Does weather matter for sealant work?
For external joints, yes. The joint has to be dry and within the product’s temperature range, so damp, frosty or very cold days can stop external work. Internal work is rarely affected.
Do you approve fire stopping for building control?
No. Approval sits with the designer, principal designer or building control. We will confirm the product and detail installed and agree any further records when we quote.
Is fire stopping in Scotland covered by different guidance?
Our area runs from Greater London and the South East to every part of Scotland. Scotland’s non-domestic Technical Handbook, clause 2.1.14, expects service penetrations to be fire stopped to at least the wall or floor’s fire resistance, using products tested for their end use.
How long does a job like this take?
It depends on the scope, though a typical visit normally takes longer where risers, ceiling voids or occupied floors have to be worked through in sequence. Larger or phased jobs take longer, and we will give you a timescale with the quote.
Building owners, agents and FMs in Pilgrims Hatch
Planned maintenance programmes are welcome: resealing failed joints building by building, on a schedule that suits your budget. Sites in Pilgrims Hatch can sit alongside others in a wider programme.
Blocks and communal areas make up much of the work for housing associations and agents. Work can be phased so residents and staff keep access throughout, with each stage agreed with your site contact.
Towns and villages near Pilgrims Hatch
What else we do in Pilgrims Hatch
Why act early in Pilgrims Hatch
A seal that doesn’t match its tested detail gives false comfort. The fix is to remove it and reinstall to the detail, so it makes sense to get it right first time. Over time, UV, weather and movement wear any sealant out. Renewing it in good time keeps the building weathertight.
Access often affects the price as much as the sealing: easy-to-reach joints are quicker than those that need equipment to get to. Tell us how the joints are reached and call for a quote.
What you get with us
- Old sealant cut out, never sealed over
- One number for every site we cover
- Sealing commercial buildings since 2005
- Clear, fixed quotes
See what affects the cost and our accreditations and insurance.
Cost factors for service penetrations
We price every job individually. The main factors are:
- The total length or number of joints
- Removal of failed or old sealant
- The product specified
- Site requirements such as inductions and permits
What a job costs comes down to how many linear metres there are, how much old material needs removing and how the joints are reached. Call for a quote when you’re ready.
Before you send an enquiry
Good information means a firmer quote. Helpful details to send:
- A wide shot and a close-up of the area
- Your programme or deadline
- How the joints are reached, and at what height
- The product your specification calls for
We quote a fixed sum against the scope you give us, so the cost is agreed before work starts. To ask for one, ring 01277 525 020 or email the details over.