Longridge fire stopping
Fire-rated and intumescent sealing of service penetrations and linear gaps across Longridge, carried out by CSCS-carded applicators. CHAS accredited and fully insured.
- Snag lists that include open service penetrations
- Openings found when ceilings come down for a refit
- Improvised or mixed-product fire seals
Fire stopping for Longridge sites
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Fire stopping in Longridge
Fire-rated sealant suits many small service penetrations: copper and steel pipes, cables and some small ducts where the tested detail allows. Other openings need collars, wraps, batts, pillows or boards. If the detail calls for something other than sealant, we say so rather than force sealant into it. If you have head-of-wall gaps with no fire seal and service penetrations left open after M&E works, we can put it right. Whether you call it commercial sealant work, mastic application or joint sealing, in Longridge it comes down to the same thing: the right product in a properly prepared joint.
In smaller Scottish places like Longridge, buildings with fire-resisting walls typically include schools, care homes, hotels and health centres. Where services pass through, specified fire-rated sealant is installed following the manufacturer’s guidance for that wall or floor.
The 12-month guarantee is for workmanship rather than wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we are clear about what is covered before work starts.
- Location
- Longridge (EH47)
- Wider area
- West Lothian
- Cover
- A 12-month guarantee
- Price
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Work for main contractors and building owners
Building owners and managing agents use us on everything from one building to a spread of sites around Longridge. One quote can cover more than one site, which keeps the paperwork simple.
Whether you are a managing agent, a property factor or an owner’s representative: send the details, accept a fixed quote, and we carry out and guarantee the work. Keys, access and contacts can be agreed in advance.
Questions about Longridge
Which Scottish guidance covers penetration seals in Longridge?
Scotland’s non-domestic Technical Handbook covers it in clause 2.1.14: penetrations keep at least the element’s fire resistance duration, with products tested for their end use. Design sits with the designer and the verifier; installation to the tested detail is our part.
Can you work at a site such as Mosshall Industrial Estate, by Longridge?
Yes, sites like Mosshall Industrial Estate are within our area, along with the rest of Longridge. To start, just ring 01277 525 020 or send photos by email with the unit, the joints involved and your access times.
What about RAMS and site documents?
Each site asks for different documents, so list what you need, whether RAMS, insurance or CSCS details, and we will confirm with the quote.
Can you work to our specification?
Yes. Include it with the drawings when you ask for a quote, and the quote will be based on it.
Do you guarantee your work?
Yes, for 12 months. If a joint fails because of how we installed it, we come back and put it right.
Do you offer coloured sealant?
It depends on the product. Some ranges are wide, others limited, so the available colours are confirmed with the quote.
How many days will you need on site?
We plan the time on site around your programme and access. You’ll have an expected duration with the quote.
Also near Longridge
More services for Longridge
Diagnose, treat, sign off
Working in a building that stays open takes some planning. The work area is signed and kept contained, with routes through the building left open and move on in phases so staff and visitors can carry on around us. For work around Longridge, we aim for one trip, so photos, sizes and a full list matter. Outside work also needs a suitable weather window.
- First we go through the drawings, schedule or specification for the seals.
- On site, each opening is checked against the tested detail it is meant to follow.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- Mineral wool or other backing goes in wherever the detail asks.
- We apply the specified sealant to the depth and around the services as the detail shows.
- If an opening needs something other than sealant, we tell you instead of improvising.
Before we start on site
- Let building users know which areas are affected
- Let us know about inductions and permits
- Share your working hours and any access restrictions
Get a fixed quote
Every quote starts with the facts: what’s there, how much of it, how we reach it and what’s specified. Send what you have, and we will arrange a site visit if anything is unclear.
Advice
When it isn’t the sealant
We seal joints; we don’t mend everything behind them. Sealant alone won’t deal with:
- Issuing fire ratings or certificates for seals
- Plastic pipes whose detail calls for a collar or wrap
- Fire risk assessments, a job for a competent assessor
If you are not sure, just call the office on 01277 525 020 or email drawings and photos and we will give you a straight answer.
Where we work in Longridge
- Cable penetrations
- Linear gaps at wall heads
- Pipe penetrations
- Joints between fire-resisting walls and floors
- Service gaps in risers
- Small duct penetrations where the tested detail allows
Looking after the joints
Regular inspection catches problems early. Specifically:
- Make fire stopping part of every scope that crosses a fire-resisting wall
- Check risers and ceiling voids after each round of works
- Leave fire sealant to cure fully before covering it
- Report damaged or disturbed seals as soon as they’re spotted
Add risers, plant rooms and ceiling voids to routine fire-stopping checks. Look for cracks, unsealed new cables and gaps that have been enlarged.
Write fire stopping into the scope of any work crossing a compartment wall or floor. That way the opening is sealed while the trade and access are still there instead of being left for someone else.
Doing it in-house
There’s also the paperwork. Many sites expect CSCS cards, RAMS and proof of insurance, and we’ll confirm the paperwork you need with the quote.
Site maintenance staff can often handle a short internal joint. The usual problems come from preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
Common problems we fix in Longridge
On a busy project, programme pressure can mean fire stopping is rushed or left to whichever trade is closest. That is when untested combinations creep in and later need putting right.
Most enquiries start with something like this:
- Openings left by services added after handover
- Seals disturbed by maintenance and left open
- Fire-stopping items raised at inspection or handover
- Head-of-wall gaps with no fire seal
Where a unit on an estate such as Mosshall Industrial Estate (2.6 miles north-east of Longridge), has fire-resisting walls between offices and warehouse, any new service through them should be sealed to the tested detail.
Comparing quotes
- How joint depth will be controlled
- How the joint faces will be prepared and primed
- Proof of insurance
- Can the work be phased to keep areas open?
Fire stopping in Longridge: the local picture
Scotland has its own building standards: the non-domestic Technical Handbook (clause 2.1.14) says service penetrations should be fire stopped to at least the fire resistance duration of the wall or floor, with products tested for that end use. We install what’s specified, to the product’s tested detail.
Theatres, wards and plant rooms at sites like Tippethill Hospital (2.3 miles north of Longridge) all have compartment walls crossed by services.
Longridge is about 4 miles south of Bathgate, in West Lothian. We cover Longridge and the rest of West Lothian, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. Longridge is one of 55 places we cover in West Lothian. Sites around Edinburgh have their own page, about 20 miles away.
We cover the EH47 postcode districts. If your site is on Main Street, Kirk Brae and School Road or close by, we can quote for service penetrations. We also cover Breich (1 mile south-east), Whitburn (1 mile north), Bents (1 mile east), East Whitburn (2 miles north-east) and Stoneyburn (2 miles east) for service penetrations. A short drive away, we cover Livingston (7 miles north-east), Bathgate (4 miles north), Linlithgow (10 miles north), East Calder (9 miles north-east), Broxburn (10 miles north-east) and Armadale (4 miles north).
Local landmarks in Longridge
The closest station to Longridge is Breich station, roughly 1.2 miles south of the centre. Well-known places in the area include Bathgate Castle (3.9 miles north-east) and Whitburn Community Museum (1.6 miles north).