Fire stopping in Little Tey
We carry out fire-rated and intumescent sealing of service penetrations and linear gaps in Little Tey and the surrounding area. Send photos or drawings for a fixed quote.
- Penetration schedules that need working through
- Seals that don’t match their tested detail
- Unsealed penetrations discovered above suspended ceilings
Fire stopping for Little Tey sites
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Commercial clients in Little Tey
We work for building owners and managing agents on sealant work across single buildings or whole portfolios around Little Tey. One quote can cover more than one site, so there’s one set of paperwork to deal with.
When you manage a building on behalf of an owner, you need clear quotes and clear reporting. You get a fixed quote, an agreed scope and a walk round at the end, plus a 12-month guarantee.
About our fire stopping in Little Tey
Our applicators are CSCS-carded, and we are CHAS accredited and a Constructionline member. We hold no third-party fire-stopping installer certificate. What we offer is careful installation of the specified sealant to its tested detail, with a 12-month guarantee on our workmanship. Most enquiries involve fire seals cut back for extra cables and never reinstated and unsealed joints where partitions meet the slab, on cable penetrations, small duct penetrations where the tested detail allows and linear gaps at wall heads. For commercial sealant work in Little Tey, you deal with one contact from quote to sign-off, whether it’s one building or several.
For a smaller site near Little Tey, we plan to do all the penetrations in one go, so send the specification and photos first. We install to the specification and the manufacturer’s guidance, leaving design and sign-off with the designer and building control.
Every job is signed off with a 12-month guarantee. It’s a plain promise: if our work fails within that year, we put it right.
- Location
- Little Tey (CO6)
- Region
- Essex
- Cover
- 12 months on our workmanship
- Price
- A fixed quote before we start
- Phone
- 01277 525 020
- Updated
- 3 November 2026
From enquiry to sign-off
The first thing on site is a walk round with your contact, agreeing which joints are in scope, where to start and what must stay open. Then we strip out anything that has failed, prepare every joint and seal it. If others near Little Tey need work, visits can be combined, which keeps travel down. A fixed quote is given before anything starts.
- First we go through the drawings, schedule or specification for the seals and raise any questions before we price.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- We fit the backing the detail asks for, to the stated depth.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- If an opening needs something other than sealant, we tell you instead of improvising.
What we need from you
- Clear stock, furniture or equipment away from the joints
- Point out parking and an unloading spot
- Send asbestos survey details if the building is pre-2000
Request a quote
Pricing a project or setting a maintenance budget? Send the scope and any drawings, and we will return a fixed quote you can plan around. If you have questions first, speak to us on 01277 525 020 or email drawings and photos.
Read more
Your questions answered
What does the BS 476 change mean for fire-rated sealant in Little Tey?
From 2 September 2029, Approved Document B drops its BS 476 references in favour of BS EN 13501-2 classification, with transitional arrangements. Whichever applies, we install the specified product to its tested detail; the specification is for the designer to set.
Is Little Tey too small for you to travel to?
No. Places such as Little Tey are covered as much as the big towns. Our area covers London and the South East counties. Send photos and a list of what needs doing, and we will plan the job to need as few trips as possible.
What if there’s asbestos in the old mastic?
Managing asbestos is the dutyholder’s responsibility, so we’ll ask for the register before work on an older building. If anything suspect turns up, we stop until it’s tested.
Do your applicators hold CSCS cards?
Yes. Should the site need card details in advance, let us know and we will send them with the quote.
What’s the quickest route to a quote?
You can use the quote form on this site; alternatively, call 01277 525 020 or email drawings and photos. Include photos or drawings if you have them.
Do you work to architects’ specifications?
Yes. We follow the specification, along with the manufacturer’s installation guidance, and any queries are raised before we start.
Can weather delay the job?
Outside, yes. The joint has to be dry and within the product’s temperature range, so frost, rain or cold mornings can delay outside work. Internal work is rarely affected.
Places near Little Tey
Other services in Little Tey
When to bring in a specialist
Paperwork matters too. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and our CSCS-carded applicators are used to working under those rules.
What you see is the finished bead, but most of the work is hidden. Correct depth, the right primer and a sealant matched to the movement are easy to get wrong without experience.
Aftercare for building managers
Problems stay small when the joints are checked regularly. Specifically:
- Look above ceilings when tiles are lifted for other jobs
- Agree the fire-stopping specification before services go in
- Make fire stopping part of every scope that crosses a fire-resisting wall
- File the specified details where the next contractor can find them
Add risers, plant rooms and ceiling voids to routine fire-stopping checks. Look for cracks, unsealed new cables and gaps that have been enlarged.
Specify fire stopping early on refits, not as an afterthought. Details can then be picked to suit the actual pipes, cables and ducts, and installation follows the programme.
Common problems we fix in Little Tey
Physical damage is another reason seals stop doing their job. Maintenance work can knock a seal, cut it back for an extra cable or remove it with an old pipe, and the repair is often skipped.
What tends to prompt an enquiry:
- Fire-rated sealant that has cracked or shrunk back
- Open linear gaps along the top of fire-resisting walls
- Fire-stopping items raised at inspection or handover
- Openings found when ceilings come down for a refit
Halls and meeting rooms at places like Church of St James sometimes gain new services, and any compartment wall crossed needs the specified seal.
Before you book anyone
- Do they follow the manufacturer’s priming guidance?
- Their pre-qualification and accreditations
- What site paperwork they can supply
- How the existing material will be dealt with
What the job involves on each surface
Small ducts
Ducts are only sealed with sealant where the detail allows it. Dampers and ductwork systems themselves are outside our work.
Linear joints
Head-of-wall joints often have to absorb slab deflection. The specified product and backing for that movement are what goes in, with no gaps along the run.
Fire stopping around Little Tey: what changes locally
Approved Document B is the English guidance that covers fire stopping around openings and penetrations. From 2 September 2029, BS 476 references are being taken out of Approved Document B, leaving BS EN 13501-2 classification as the route, subject to the Government’s transitional arrangements. Our part stays the same: the specified product, installed to its tested detail. Central London is about 45 miles from Little Tey. Tenant changes on commuter-belt business parks mean regular fit-outs, and new services through compartment walls; the gaps need the specified seal.
In a school such as Honywood Community Science School, fire-rated sealant goes in around service penetrations where it is specified. Tenant changes at parks like Threshelfords Business Park (to the south-west of Little Tey) bring new data and services, and openings through fire-resisting walls need the specified seal.
Little Tey is about 6 miles south-east of Halstead, in Essex. Anywhere in CO6, it works the same way: details in, fixed quote out, then sealing and a 12-month guarantee. Across Essex, 644 places are covered, including Little Tey. Our London page has more on work in that area (45 miles or so).
We take on service penetrations across the CO6 postcode area, for business premises of every kind. If your site is on Church Lane, Coggeshall Road and Great Tey Road or close by, we can quote for service penetrations. Sites close to Little Tey are covered too, including Broad Green (1 mile west), Marks Tey (1 mile east), Skye Green (1 mile south-west), Surrex (1 mile west) and Stocks Green (2 miles south-west). Further afield, our area takes in Colchester (6 miles east), Chelmsford (15 miles south-west), Braintree (8 miles west), Maldon (11 miles south), Witham (7 miles south-west) and Camulodunum (5 miles east).
Around Little Tey
In Little Tey, that means premises near The Red Lion Public House. Little Tey’s nearest station is Marks Tey station, about 1.5 miles east of the centre. Nearby you will also find Birch Castle (3.9 miles south-east) and Laundry & Mangle Museum (3.3 miles west). The countryside around Little Tey includes Iron Latch.