Latchingdon fire stopping
Work needed on a service penetration in Latchingdon? We assess it, carry out the work and guarantee our workmanship for 12 months.
- Unsealed joints where partitions meet the slab
- Damaged fire seals in risers and voids
- Penetration schedules that need working through
Fire stopping in Latchingdon
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Common problems we fix in Latchingdon
A common fault is a product that was never fire-rated in the first place: expanding foam or a general-purpose sealant pushed into a gap to tidy it. It may look closed, but it has no tested fire performance in that position.
Look out for the following:
- Seals disturbed by maintenance and left open
- Old intumescent sealant that has split away
- Unsealed openings around new pipes and cables
- Open linear gaps along the top of fire-resisting walls
Halls and meeting rooms at places like Christ Church sometimes gain new services, and any compartment wall crossed needs the specified seal.
Before you book anyone
- What the guarantee covers, and for how long
- How they’ll work around occupants
- Will RAMS and insurance details be available?
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
Fire stopping for commercial buildings in Latchingdon
We are commercial sealant applicators, CHAS accredited and a Constructionline member, with CSCS-carded applicators on site. We don’t hold a third-party fire-stopping installer certificate. We install the specified fire-rated sealant to its tested detail, and our workmanship carries a 12-month guarantee. Most enquiries involve seals that don’t match their tested detail and non-fire-rated filler around services, across cable penetrations, pipe penetrations and service gaps in risers. Whoever orders the work in Latchingdon, the brief is usually the same: a clear scope, tidy work and joints that don’t fail again.
Rural conversions around Latchingdon can put new fire-resisting partitions inside older structures. A penetration seal only performs as tested if product, substrate, service, gap and depth all match the detail.
We stand by our work with a 12-month guarantee. It covers how we prepared and applied the sealant.
- Place
- Latchingdon (CM3)
- Region
- Essex
- Cover
- 12 months on every job
- Quote
- Quoted before any work starts
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
What we can’t put right
Our job is the joint, not everything around it. On its own, sealant can’t deal with:
- Issuing fire ratings or certificates for seals
- Reviewing a building’s overall fire safety
- Designing or specifying fire stopping, which sits with the designer or fire engineer
If you are not sure, just phone 01277 525 020 or email drawings and photos and we’ll give you a straight answer.
Joints and surfaces we work on
- Joints between fire-resisting walls and floors
- Cable penetrations
- Linear gaps at wall heads
- Pipe penetrations
- Small duct penetrations where the tested detail allows
- Service gaps in risers
Where services cross fire walls in Latchingdon
In England, Approved Document B covers fire stopping of openings and penetrations. Its BS 476 references are being withdrawn from 2 September 2029, with BS EN 13501-2 classification taking over, subject to transitional arrangements. We install whatever has been specified, to the product’s tested detail. Latchingdon is about 37 miles from central London. Offices around the capital are refitted often, and the cabling that follows can breach fire-resisting walls.
Office fit-outs on sites such as Red Lions Business Centre, under half a mile south-east of Latchingdon, add cabling and pipework through fire-resisting walls, and fire-rated sealant goes in where the specification calls for it.
Latchingdon is about 4 miles south-east of Maldon, in Essex. Across the CM3 postcode area, it works the same way: send details, get a fixed quote, we seal, and the work is guaranteed. We work across 644 places in Essex, large and small. There’s a separate page for London, roughly 37 miles from Latchingdon.
If you need fire stopping in CM3, the process matches everywhere else we work: send details, get a quote, we seal, guaranteed. If your site is on The Street, Buchanan Way and Snoreham Gardens or close by, send details and we will quote for service penetrations. Just outside Latchingdon, we also work in Mundon (2 miles north-west), Althorne (2 miles south-east), Maylandsea (2 miles north-east), Mayland (2 miles north-east) and Ostend (4 miles south-east). A short drive away, we cover Chelmsford (11 miles north-west), Basildon (13 miles south-west), Maldon (4 miles north-west), Canvey Island (12 miles south-west), Billericay (13 miles west) and Rayleigh (8 miles south-west).
Around Latchingdon
Locally, jobs take us to sites close to The Lion Public House, among other places. The closest station to Latchingdon is Althorne station, about 1.9 miles south-east. Open spaces near Latchingdon include Blue House Farm.
FAQs: Latchingdon
How does the removal of BS 476 from Approved Document B affect fire-rated sealing in Latchingdon?
References to BS 476 classes are being removed from Approved Document B from 2 September 2029, after which BS EN 13501-2 classification is the route, subject to transitional arrangements. The designer or fire engineer sets the specification, and we install the product to the manufacturer’s tested detail.
Is Red Lions Business Centre, near Latchingdon, within your area?
Yes. We cover Latchingdon and the area around it, including industrial estates, business parks and retail parks such as Red Lions Business Centre. A few photos and the unit address let us price the work.
What’s the quickest route to a quote?
It works in four steps: send details, receive a fixed quote, we carry out the work, and it’s guaranteed. The first step only needs photographs and a postcode.
What do you charge?
Each job is quoted on its own details. To get one, call 01277 525 020 or email a schedule or drawings with a description of the work.
Can one quote cover more than one building?
Yes. A group of buildings can go on one quote, with one point of contact across South East England, Greater London and Scotland.
Is Latchingdon in your area?
Yes. We cover Latchingdon and the rest of Essex. To discuss a job, ring 01277 525 020 or email the details over.
When is resealing likely to be due?
There’s no fixed lifespan: movement, exposure, cleaning, traffic and the product all play a part. Treat them as maintenance items and inspect them regularly.
Quoting for work in Latchingdon
We price every job individually. The main factors are:
- Any access equipment needed
- Backing rod, priming and other preparation
- Phasing around occupants
- How much existing material needs removing
We don’t publish prices, since every building and every scope is different. For a fixed figure, call for a quote.
Before you send an enquiry
Good information means a firmer quote. When you get in touch, include:
- What the building is and how it’s used
- When you need the work done
- Any specification or named product
- Clear photographs of the problem areas
Quotes are fixed against the scope you send, so the cost is agreed before work starts. To ask for one, speak to us on 01277 525 020 or send details through our quote form.
Surface by surface
Linear joints
Joints at the top of partitions may need to move as the slab above deflects. The specified product and backing for that movement are what goes in.
Drylining partitions
Service holes through plasterboard are frequently oversized or ragged. An oversized hole may be outside the sealant’s range and we’ll tell you what the detail says instead.
More services for Latchingdon
For managing agents and facilities managers
For main contractors, we work as the sealant subcontractor on new-build and refurbishment projects. We work to your programme, your specification and your site rules, with CSCS-carded applicators on site.
When you manage a building on behalf of an owner, clear figures and clear communication matter. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative, plus a 12-month guarantee.
Diagnose, treat, sign off
At the end of each section, we remove the tape, clean down and inspect every joint. Where the sealant needs time to cure before use, we tell you and sign the area. Rural sites near Latchingdon may need directions, gate codes or a contact on site. Add it to your enquiry and we’ll build it into the plan.
- We start with your penetration schedule, drawings or specification.
- We plan the sequence of floors, risers and voids with you.
- Each opening is checked for wall or floor type, service, gap and depth.
- Unsuitable material is removed and the opening cleaned so the seal starts clean.
- The specified backing and sealant go in to depth and are finished neatly.
- Anything outside the detail is reported to you rather than sealed.
Before we start on site
- Send your site hours and access windows
- Flag any permit to work we’ll need
- Send any specification or drawings in advance
Getting a fixed quote
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. To take the first step, ring 01277 525 020 or use the quote form.