Ingatestone fire stopping
We carry out fire-rated and intumescent sealing of service penetrations and linear gaps in Ingatestone. Send details for a fixed quote.
- Open linear gaps along the top of fire-resisting walls
- Penetration schedules that need working through
- Openings left by services added after handover
Fire stopping across Ingatestone
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Fire stopping in Ingatestone
Opened ceilings and riser doors often reveal service openings nobody sealed. Where the walls and floors already have a fire-stopping specification, we can work to it using the product and detail it sets out. Where there isn’t one, the designer or fire engineer needs to set one first. If you are dealing with old intumescent sealant that has split away and service penetrations left open after M&E works, we can put it right, whatever the surface. Looking for mastic applicators who cover Ingatestone? We’ve been sealing commercial buildings since 2005, with CSCS-carded applicators.
Fire-rated sealing in a place like Ingatestone is usually a single building at a time. With the specification and photographs of the gaps, we can give a fixed quote and bring the right products.
We stand by our work with a 12-month guarantee. That covers our preparation and application.
- Where
- Ingatestone (CM4)
- Region
- Essex
- Guarantee
- A 12-month guarantee
- Price
- A fixed quote before we start
- Call
- 01277 525 020
- Page updated
- 3 November 2026
General trades versus a specialist
For most general trades, sealant is a sideline. A specialist prepares properly, controls joint depth and picks a product with the right movement class, which is what makes a joint last.
Paperwork matters too. Many sites expect CSCS cards, RAMS and proof of insurance, and our CSCS-carded applicators are used to working under those rules.
Common problems we fix in Ingatestone
Physical damage is another reason seals stop doing their job. Seals get knocked during maintenance, cut back to add a cable or pulled out when services are swapped.
It’s worth sending us details if you spot any of the following:
- Builders’ foam or ordinary silicone in compartment walls
- Unsealed penetrations discovered above suspended ceilings
- Openings left by services added after handover
- Fire stopping installed outside its tested range
In a school such as Ingatestone Infant School, fire-rated sealant goes in around service penetrations where it is specified.
What your quote should include
- Their plan for phasing and protecting the area
- What level of public liability insurance do they hold?
- Is the sealant right for the movement and the substrate?
- Their approach to joint depth and backing
Nearby places to Ingatestone
What else we do in Ingatestone
For managing agents and facilities managers
Planned maintenance programmes are welcome: working through a building or an estate in stages that fit your budget. Sites in Ingatestone can sit alongside others in a wider programme across Essex.
CHAS accredited and a Constructionline member, we are straightforward to vet for your supplier list. Our insurance certificate can be sent along with the quote.
Keeping the joints sound
To get the most from the new sealant:
- Settle who seals which penetrations at the start of a project
- Record which product was used where
- Brief every trade that openings they make must be sealed
- Keep general-purpose fillers away from compartment walls
Allow the manufacturer’s stated cure time before boxing in or decorating. Not every fire-rated product can be painted, and the data sheet says which.
The simplest way to keep compartment walls intact is to plan fire stopping into every job that crosses them. That way the opening is sealed while the trade and access are still there instead of being left for someone else.
Compartments and services around Ingatestone
Approved Document B is the English guidance that covers fire stopping around openings and penetrations. From 2 September 2029, BS 476 references are being taken out of Approved Document B, leaving BS EN 13501-2 classification as the route, subject to the Government’s transitional arrangements. Our part stays the same: the specified product, installed to its tested detail. Central London is about 24 miles from Ingatestone. Tenant changes on commuter-belt business parks mean regular fit-outs, and new services through compartment walls.
Hospital estates such as Mayflower Community Hospital (to the south of Ingatestone) are divided into fire compartments, and any service penetration through them should be sealed to the specified, tested detail. Residences at universities like Writtle University College Cow Watering Campus, 4.6 miles north of Ingatestone, have compartment walls that must be resealed whenever services change.
Ingatestone is about 3 miles north-west of Billericay, in Essex. Our applicators travel to Ingatestone for work on service penetrations, handled exactly as we handle every other area. Ingatestone is one of 644 places in Essex on our list for service penetrations. London is covered too, around 24 miles from Ingatestone.
Business premises anywhere in CM4 are within our area for service penetrations. Among the streets we cover are Market Place, High Street and The Furlongs, and sites on any of them can send details for a fixed quote. Ingatestone sits on or close to the B1002, useful when we plan access and materials. Sites close to Ingatestone are covered too, including Fryerning (1 mile north), Mill Green (1 mile north), Green Street (1 mile west), Buttsbury (1 mile south) and Beggar Hill (1 mile north-west). A short drive away, we cover Chelmsford (7 miles north-east), Basildon (8 miles south-east), Harlow (13 miles north-west), Brentwood (4 miles south-west), Maldon (14 miles east) and Canvey Island (13 miles south-east).
Landmarks near Ingatestone
We work on buildings around Anglo European School and The Bell Inn. Ingatestone has its own railway station: Ingatestone station. Well-known places in the area include Mayflower Community Hospital (3.5 miles south). For a walk, there’s Norsey Wood.
Your questions answered
Can work at a site such as Writtle University College Cow Watering Campus fit around teaching?
Yes. We plan campus work around teaching, exams and residence turnarounds. Tell us which site documents you need, such as RAMS, our insurance certificate or CSCS details, and they’re confirmed with the quote.
Is Ingatestone off your patch?
Not at all: smaller places are covered as well as towns. Our area covers London and the South East counties. We plan jobs in smaller places so return trips are kept to a minimum.
Do you hold third-party fire-stopping installer certification?
No, and we won’t imply otherwise. Some clients require third-party installer schemes even though the law doesn’t. Where it isn’t required, we install the specified sealant to the maker’s details.
Will you write the fire-stopping specification?
No, that isn’t our role. With the designer’s details in hand, we can price the sealant elements, and tell you if a detail needs another product.
Who decides which product is used?
A specification, where there is one, decides it. If there isn’t one, it comes down to the joint: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.
Do you need to see the site first?
Many jobs can be quoted from photos, drawings or a joint schedule. Where they aren’t, we arrange a site visit.
How do I request a quote?
There are four steps: send details, get a quote, we seal, guaranteed. The first step only needs photographs and a postcode.
Leave it or put it right?
An improvised seal can look finished while offering no tested performance. Correcting it means cutting it out and starting again with the specified product, so it makes sense to get it right first time. For buildings in places like Ingatestone, one well-planned visit beats several small ones, so it’s worth dealing with every failing joint at once.
No two sites price the same: the joint sizes, the specified product, access and working hours each have a bearing. Send the details and a fixed figure follows.
What you get with us
- Constructionline member for supplier checks
- Failed material removed, not covered up
- Commercial sealant work since 2005
- One phone line for London, the South East and Scotland
Take a look at what affects the cost or our accreditations.
On site: what to expect
At the end of each section, the masking comes off, the area is cleaned and every joint is checked with your site contact. If an area should be left alone while the sealant cures, we say how long and put signs out. For a site in Ingatestone, we plan so the whole job is done in one go where possible. Photos with rough sizes let us arrive with everything needed.
- First we go through the drawings, schedule or specification for the seals.
- On site, each opening is checked against the tested detail it is meant to follow.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- We fit the backing the detail asks for, to the stated depth.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
What we need from you
- Confirm the product named in the specification
- Send your site hours and access windows
- Explain the parking and delivery arrangements
Getting a fixed quote
To get a fixed quote, speak to us on 01277 525 020 or email drawings and photos. You can also send details through our quote form.