Fire-rated sealing and fire stopping in Hurst Green, Surrey
Planning work on a service penetration in Hurst Green? We assess it, carry out the work and guarantee our workmanship for 12 months.
- Unsealed penetrations discovered above suspended ceilings
- Non-fire-rated filler around services
- Old intumescent sealant that has split away
Fire stopping across Hurst Green
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Compartment walls and floors in Hurst Green
Hurst Green is about 18 miles from central London. Office refits around the commuter belt bring new cabling through fire-resisting walls. Hurst Green has two care or nursing homes no more than 2 miles away. In a care home, any new pipe or cable through a fire-resisting wall should be sealed to the specified detail.
In a school such as Hurst Green Infant School, fire-rated sealant goes in around service penetrations where it is specified. On a hospital site such as Foetal Alcohol Spectrum Disorders Clinic, 0.9 miles north of Hurst Green, fire-rated sealant goes in where the specification calls for it, with the work planned around the estates team’s permits.
Hurst Green is about 1 mile south of Oxted, in Surrey. Looking for fire stopping in Hurst Green? We can help, as we do across Surrey. Across Surrey, 379 places are covered, including Hurst Green. Sites around London have their own page, about 18 miles away.
Business premises anywhere in RH8 are within our area for service penetrations. Streets here include Oast Road, Spring Lane and Quarry Road, and sites on any of them can send details for a fixed quote. Nearby places we also cover include Oxted (1 mile north), Limpsfield (1 mile north-east), Pains-Hill (1 mile east), Tandridge (2 miles west) and Merle Common (2 miles south-east). Nearby towns on our patch include Epsom (13 miles north-west), Horley (9 miles south-west), Redhill (7 miles west), Ewell (13 miles north-west), Reigate (9 miles west) and Caterham (5 miles north-west).
Around Hurst Green
Locally, jobs take us to sites close to Hazelwood School and Oxted School and the streets around them. There’s a railway station in Hurst Green itself: Hurst Green station. Other landmarks nearby include Haxted Watermill Museum (4 miles south) and Bletchingley Castle (4.6 miles west). Green spaces nearby include Bay Pond and Botley Hill.
Fire stopping in Hurst Green, done properly
Every service that crosses a compartment wall or floor leaves an opening, and that opening needs sealing to hold back fire and smoke. Our part is installing fire-rated and intumescent sealant at those openings and along linear gaps, where the specification calls for it. Each seal follows the manufacturer’s tested detail rather than guesswork. Most enquiries involve seals that don’t match their tested detail and openings left by services added after handover, on linear gaps at wall heads, small duct penetrations where the tested detail allows and joints between fire-resisting walls and floors. For commercial sealant work in Hurst Green, you deal with one contact from quote to sign-off, whether it’s one building or several.
Rural conversions around Hurst Green can put new fire-resisting partitions inside older structures. Where a pipe or cable passes through a fire-resisting wall, the seal must match the tested detail: product, substrate, gap and depth.
Our 12-month guarantee is about workmanship, not wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we spell out the cover before we begin.
- Location
- Hurst Green (RH8)
- Wider area
- Surrey
- Guarantee
- 12 months on every job
- Price
- A fixed quote before we start
- Call
- 01277 525 020
- Page updated
- 3 November 2026
Nearby places to Hurst Green
Also in Hurst Green
Cost factors for service penetrations
What shapes the price:
- How much existing material needs removing
- Which sealant the job calls for
- Distance, for remote addresses
- Induction, permit and paperwork requirements
The product called for affects the cost, as does the preparation each joint needs, from cutting out to priming and backing rod. Access, phasing and site rules also count.
Details that help us quote
A few photographs plus some basic facts will normally do. It helps to include:
- Drawings or a marked-up plan, if available
- Any dates the work must fit around
- The site address and postcode
- Clear photos of the problem areas
Tell us about the building, the joints and when you need the work done, and we will put a fixed quote together. The easiest way is to phone 01277 525 020 or email the details over.
Looking after the joints
After handover, these steps help:
- Foam or ordinary sealant is never a fire-seal repair
- Brief every trade that openings they make must be sealed
- Leave fire sealant to cure fully before covering it
- Check risers and ceiling voids after each round of works
Add risers, plant rooms and ceiling voids to routine fire-stopping checks. Look for cracks, unsealed new cables and gaps that have been enlarged.
Ask every contractor who works in risers or voids to report openings they create. Small habits like this stop openings building up.
What we are called out for in Hurst Green
Fire stopping can get squeezed at the end of a programme, or done by whoever is on site. That is how unsuitable products and improvised details end up in compartment walls.
Common reasons buildings call us in:
- Builders’ foam or ordinary silicone in compartment walls
- Hidden openings found during inspections
- Open linear gaps along the top of fire-resisting walls
- Fire sealant pulled out of the opening
For a building such as St Agatha's Hall, new heating or data runs are the usual reason penetrations need sealing.
What to look for in a quote
- Their approach to joint depth and backing
- Will RAMS and insurance details be available?
- The terms of the workmanship guarantee
- Whether old or failed sealant will be cut out, not overlaid
How the job changes by surface
Small ducts
Some fire-rated sealant details cover small ducts. Bigger ducts and fire-resisting ductwork are normally handled with other products and we flag that rather than guess.
Linear joints
Head-of-wall joints often have to absorb slab deflection. We use the product and backing the detail names for that movement.
Doing it in-house
The visible bead is only part of the job. Correct depth, the right primer and a sealant matched to the movement are easy to get wrong without experience.
Paperwork matters too. Many sites expect CSCS cards, RAMS and proof of insurance, and we’ll confirm the paperwork you need with the quote.
Diagnose, treat, sign off
At the end of each section, we remove the tape, clean down and inspect every joint with your site contact. Where the sealant needs time to cure before use, we tell you and sign the area. Smaller jobs around Hurst Green can be grouped with others nearby, which keeps travel down. A fixed quote is given before anything starts.
- We read the specification, drawings or penetration schedule you send and ask about anything unclear.
- On site, each opening is checked against the tested detail it is meant to follow.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- Mineral wool or other backing goes in wherever the detail asks.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
What we need from you
- Share your working hours and any access restrictions
- Tell staff and tenants when we’ll be in
- Send any specification or drawings in advance
Ask for a quote
Send us photographs, drawings or a joint schedule are often enough for a fixed quote. Where a site visit makes more sense, we will arrange one.
Read more
Your questions answered
What happens to BS 476 references for fire stopping in Hurst Green?
From 2 September 2029, Approved Document B drops its BS 476 references in favour of BS EN 13501-2 classification, with transitional arrangements. The designer or fire engineer sets the specification, and we install the product to the manufacturer’s tested detail.
Is Hurst Green too far out for you?
Not at all. Hurst Green is within our area. We cover Greater London and the counties of the South East. Where we can, we group nearby jobs to make the most of each trip.
Can you quote from photos?
Photos, drawings or a schedule are often enough to quote. If the job needs a look first, we will arrange a visit before quoting.
Are you CHAS accredited and on Constructionline?
Yes. We’re CHAS accredited, we are a Constructionline member and we use CSCS-carded applicators.
Are you fully insured?
Yes. We are fully insured, and the certificate can go with your quote.
Can you handle several sites?
Yes. Multi-site work and planned programmes are a core part of the service, with each site phased to suit its occupants.
How do you deal with asbestos in old sealant?
Asbestos is possible in some older mastics, particularly in buildings from before 2000. We check the asbestos register before cutting out old sealant in an older building, and if asbestos is suspected, work stops until it’s tested. We don’t remove asbestos-containing materials.