Hatfield Peverel fire stopping
Our CSCS-carded applicators take on fire-rated and intumescent sealing of service penetrations and linear gaps in Hatfield Peverel and the surrounding area. Send photos or drawings for a fixed quote.
- Openings left by services added after handover
- Openings found when ceilings come down for a refit
- Fire-rated sealant that has cracked or shrunk back
Fire stopping for Hatfield Peverel sites
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
About our fire stopping in Hatfield Peverel
No fire sealant works on its own: the evidence covers a specific product, wall or floor type, service, gap, depth and backing. We match each opening to that detail before any sealant goes in, and we say so if it doesn’t fit. We work on joints between fire-resisting walls and floors, small duct penetrations where the tested detail allows and service gaps in risers, and the usual reasons a site gets in touch are fire-stopping items raised at inspection or handover and improvised or mixed-product fire seals. One point of contact handles commercial sealant work in Hatfield Peverel from the first photos to the final walk-round, whether it’s one building or several.
Buildings in a smaller place such as Hatfield Peverel that need fire-rated sealing are typically schools, care homes, surgeries, small offices and flats over shops. Specified fire-rated sealant goes around new services there, built to match the manufacturer’s detail.
We sign every job off with a 12-month guarantee. The promise is simple: if the work we did fails within twelve months, we return to fix it.
- Location
- Hatfield Peverel (CM3)
- Region
- Essex
- Cover
- A 12-month guarantee
- Quotes
- A fixed quote before we start
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Questions about Hatfield Peverel
Is a smaller place like Hatfield Peverel outside your area?
Not at all. Hatfield Peverel is within our area. We cover Greater London and the counties of the South East. Send photos and a list of what needs doing, and we will plan the job to need as few trips as possible.
Can you take on a job at a hospital such as Priory Hospital?
Yes, hospitals are one of the sectors we cover. Work is phased so departments keep running, under the site’s own rules.
What do BS EN 1366-3 and BS EN 13501-2 mean?
In short, BS EN 1366-3 and 1366-4 are the fire tests and BS EN 13501-2 is how results are classified. An EI 60 seal kept its integrity and insulation for 60 minutes as tested.
Do you design or specify fire stopping?
No. Deciding what is needed sits with the designer, fire engineer and building control. Our role is fitting the specified fire-rated sealant, following the maker’s tested details.
What about RAMS and site documents?
Each site asks for different documents, so tell us what you need and we will confirm it when we quote.
Do you work in Scotland as well as England?
Building standards in Scotland are separate from England’s. Either way, we install the specified sealant to its tested detail.
Will you come and look before quoting?
Photos, drawings or a schedule are often enough to quote. Where they aren’t, we arrange a site visit before quoting.
General trades versus a specialist
What you see is the finished bead, but most of the work is hidden. Backing rod, primer where specified and a joint designed to move with the building are where general trades tend to cut corners.
Redoing a failed joint typically costs more than getting it right at the outset, because the whole bead must be removed and the faces cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
Quoting for work in Hatfield Peverel
Quotes vary with the job. It mainly depends on:
- Quantities, in metres or numbers
- Access and working height
- Joint width, depth and condition
- Induction, permit and paperwork requirements
Quantities, awkward access and phased working all shape the price. So do site requirements such as inductions and permits, along with the time of year for external work.
Before you send an enquiry
Diagnosis starts before we arrive. Tell us:
- Access details, including height
- Whether the building will be occupied during the work
- Clear photos of the problem areas
- The asbestos register, for older buildings
Tell us about the building, the joints and when you need the work done, and a fixed quote will follow. The easiest way is to call 01277 525 020 or email drawings and photos.
Nearby places to Hatfield Peverel
More services for Hatfield Peverel
Signs you need fire stopping in Hatfield Peverel
Physical damage is another reason seals stop doing their job. Seals get knocked during maintenance, cut back to add a cable or pulled out when services are swapped, and the repair is often skipped.
These are often picked up first by site or facilities staff:
- Hidden openings found during inspections
- Improvised or mixed-product fire seals
- Expanding foam used as fire stopping
- Penetration schedules that need working through
For a school such as Hatfield Peverel St Andrew's Junior School, penetration sealing fits best at the end of the summer works.
Before you book anyone
- How long is the guarantee, and what does it include?
- How joint depth will be controlled
- How the existing material will be dealt with
- Do they follow the manufacturer’s priming guidance?
On site: what to expect
Tell us your site hours and access windows and we will plan around them. On the day, the work area is kept contained and tidy, and your contact hears from us before we move to the next area. For a job in Hatfield Peverel, the main thing is a clear picture of the work, so send photos of each area. You will then get a fixed price for the work.
- First we go through the drawings, schedule or specification for the seals and raise any questions before we price.
- On site, each opening is checked against the tested detail it is meant to follow.
- Unsuitable fillers and loose debris are taken out of each opening.
- Mineral wool or other backing goes in wherever the detail asks.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
Getting the site ready
- Tell staff and tenants when we will be in
- Confirm the product named in the specification
- For older buildings, check the asbestos register before work
Get a fixed quote
Send us photographs, drawings or a joint schedule are often enough for a fixed quote. If the job needs a look first, we will arrange a site visit.
Read more
What sealant work can’t fix
Honesty saves time and money. New sealant won’t cure:
- Reviewing a building’s overall fire safety
- Plastic pipes whose detail calls for a collar or wrap
- Approving the work on behalf of building control
If you’re not sure, just phone 01277 525 020 or email a schedule or drawings and we’ll give you a straight answer.
Surfaces we seal
- Joints between fire-resisting walls and floors
- Small duct penetrations where the tested detail allows
- Cable penetrations
- Pipe penetrations
- Linear gaps at wall heads
- Service gaps in risers
Surface by surface
Plastic pipes
Waste and drainage pipes through floors are a frequent case. Whether sealant alone is acceptable depends entirely on the tested detail, and we won’t substitute it for a specified collar.
Masonry and concrete
Openings through concrete vary from tidy cores to rough break-outs. The gap is measured at the widest point so we know it sits within the tested range, and any that don’t are flagged.
Penetration seals near Hatfield Peverel
At about 35 miles from central London, Hatfield Peverel is within reach of the capital. Offices around the capital are refitted often, and the cabling that follows can breach fire-resisting walls, and the gaps need sealing with the specified product. Fire stopping of openings and penetrations in England falls under Approved Document B. From 2 September 2029, BS 476 references are being taken out of Approved Document B, leaving BS EN 13501-2 classification as the route, subject to the Government’s transitional arrangements. We install whatever has been specified, to the product’s tested detail.
Large healthcare estates like Priory Hospital, 5.1 miles south-west of Hatfield Peverel, change their services often, so penetration seals are worth checking after M&E work. Older community buildings such as Parish Church of St Andrew that have been rewired or given new heating can have service gaps through walls worth checking against the specification.
Hatfield Peverel is about 2 miles south-west of Witham, in Essex. We cover commercial sites throughout Hatfield Peverel. 644 places across Essex fall within our area, Hatfield Peverel among them. For work in that direction, see our London page.
We take on service penetrations across the CM3 postcode area. If your site is on The Street, Station Road and Church Road or close by, we can quote for service penetrations. Close to Hatfield Peverel, our area also takes in Mowden (1 mile south-west), Boreham (2 miles south-west), Little Baddow (3 miles south), Danbury (4 miles south) and Springfield (4 miles south-west). Further afield, our area takes in Colchester (15 miles north-east), Chelmsford (5 miles south-west), Basildon (15 miles south-west), Braintree (8 miles north), Maldon (5 miles south-east) and Billericay (13 miles south-west).
Near you in Hatfield Peverel
In Hatfield Peverel, that means premises near The Swan Inn and Maltings Academy, among other places. Hatfield Peverel has its own railway station: Hatfield Peverel station. A little further out are Priory Hospital (5.1 miles south-west). The countryside around Hatfield Peverel includes Danbury Ridge Nature Reserves.