Fire-rated sealing and fire stopping in Great Sampford, Essex
Fire-rated and intumescent sealing of service penetrations and linear gaps in Great Sampford. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.
- Openings found when ceilings come down for a refit
- Openings left by services added after handover
- Fire sealant pulled out of the opening
Fire stopping for Great Sampford sites
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
How the job changes by surface
Masonry and concrete
Block walls and concrete floors are common substrates for penetration seals. Dust and debris are cleared from the opening, so the sealant and any backing sit properly.
Linear joints
Joints at the top of partitions may need to move as the slab above deflects. We use the product and backing the detail names for that movement.
Fire stopping in Great Sampford
No fire sealant works on its own: its test evidence covers one product in one kind of wall or floor, with set services, gaps, depths and backing. We match each opening to that detail before any sealant goes in. We work on joints between fire-resisting walls and floors, pipe penetrations and service gaps in risers, and what we’re called in for most is fire seals cut back for extra cables and never reinstated and hidden openings found during inspections. Facilities teams, main contractors and managing agents in Great Sampford tend to want the same three things: a clear scope, tidy work and joints that don’t fail again.
For a smaller site near Great Sampford, we plan to do all the penetrations in one go, so send the specification and photographs first. We install to the specification and the manufacturer’s guidance, leaving design and sign-off with the designer and building control.
Every job is signed off with a 12-month guarantee. It’s a plain promise: if our work fails within that year, we put it right.
- Location
- Great Sampford (CB10)
- Region
- Essex
- Guarantee
- 12 months on our workmanship
- Quote
- Quoted before any work starts
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
Work for main contractors and building owners
For main contractors, we work as the sealant subcontractor on new-build and refurbishment projects. Programme, specification and site rules come first, and our applicators hold CSCS cards.
Hospitality, education, healthcare, office and retail clients come to us directly as well. We plan around the way the building is used, so guests, pupils, patients or staff are disturbed as little as possible.
Cost factors for service penetrations
Quotes vary with the job. Expect it to depend on:
- Travel to remote or island sites
- Working within restricted access windows
- Removal of failed or old sealant
- The total length or number of joints
What a job costs comes down to how many linear metres there are, how much old material needs removing and the access. Call for a fixed quote when you are ready.
What to include in your enquiry
A good diagnosis starts with the right details. Tell us:
- Clear photographs of the problem areas
- Whether an asbestos survey exists
- Any specification or named product
- Access details, including height
Tell us about the building, the joints and when you need the work done, and a fixed quote will follow. The easiest way is to call 01277 525 020 or email drawings and photos.
FAQs: Great Sampford
What happens to BS 476 references for fire stopping in Great Sampford?
From 2 September 2029, Approved Document B drops its BS 476 references in favour of BS EN 13501-2 classification, with transitional arrangements. The designer or fire engineer sets the specification, and we install the product to the manufacturer’s tested detail.
Is a smaller place like Great Sampford outside your area?
No. Small places get the same service as large ones. Our area covers London and the South East counties. We plan jobs in smaller places so return trips are kept to a minimum.
Will you quote for a small job?
Whatever the size, the process is the same: send details, get a fixed quote, we seal, guaranteed.
Does the weather affect the work?
It can, when the joints are outside. Sealant won’t bond properly to a wet or frosty joint, so external work may be moved if conditions aren’t right. Indoors, the weather is rarely a problem.
Do you offer coloured sealant?
It depends on the product specified. Some ranges offer many colours, others very few, so we’ll confirm the colours available for the specified product with the quote.
Do you need to see the site first?
Many jobs can be quoted from photographs, drawings or a joint schedule. If the job needs a look first, we will arrange a visit.
How long do sealant joints last?
There isn’t a single answer, since movement, weather, cleaning and use all affect it. Regular inspection is the best way to catch problems early.
Places near Great Sampford
Also in Great Sampford
Fire stopping in Great Sampford: the local picture
At about 40 miles from central London, Great Sampford is within reach of the capital. Offices around the capital are refitted often, and the cabling that follows can breach fire-resisting walls; the gaps need the specified seal. Fire stopping of openings and penetrations in England falls under Approved Document B. The national BS 476 classes are due to drop out of it from 2 September 2029, leaving the European BS EN 13501-2 route, subject to transitional arrangements. What we install is set by the specification, and it goes in to the tested detail.
For a building such as Church of St Michael, new heating or data runs are the usual reason penetrations need sealing.
Great Sampford is in Essex. We send applicators to Great Sampford for service penetrations, handled exactly as we handle every other area. Across Essex, 644 places are covered, Great Sampford among them. Our London page has more on work in that area.
We cover the CB10 postcode districts. Streets here include Sparepenny Lane South, Parsonage Farm Lane and Willetts Field. Close to Great Sampford, our area also takes in Wimbish Green (3 miles west), Bardfield End Green (3 miles south), Tye Green (3 miles west), Thaxted (3 miles south-west) and Howlett End (4 miles west). Further afield, our area takes in Braintree (10 miles south-east), Saffron Walden (7 miles west), Halstead (11 miles east), Great Dunmow (8 miles south), Stansted Mountfitchet (11 miles south-west) and Great Notley (11 miles south-east).
Around Great Sampford
In Great Sampford, that means premises near Red Lion Inn, among other places. Nearby you’ll also find Castle Camps (4.5 miles north). Open spaces near Great Sampford include West Wood.
On site: what to expect
We follow your site rules from the start: sign-in, induction and whatever permit system the building uses. With the paperwork done, we take the joints in the sequence agreed with you. Rural sites near Great Sampford may need directions, gate codes or a contact on site. Add it to your enquiry and we’ll build it into the plan.
- We ask for the product and detail your designer has specified.
- Openings are measured and grouped by detail.
- Improvised fillers and failed sealant are removed.
- Where the detail needs backing, it goes in at the stated depth.
- We gun the sealant in to the specified depth around each service and tool it.
- We walk the completed areas with you and confirm the records agreed at quote stage.
Getting the site ready
- Send your site hours and access windows
- Let building users know which areas are affected
- Arrange parking or a loading space
Getting a fixed quote
We quote a fixed sum against the scope you give us, so you know the figure before anyone is on site. To start the process, ring 01277 525 020 or email the details over.
Read more
When something else is needed
Not every problem is a sealant problem, and we’d rather tell you before you spend money. It won’t fix:
- Issuing fire ratings or certificates for seals
- Reviewing a building’s overall fire safety
- Gaps in walls that were never built as compartment walls
If you are not sure, just call 01277 525 020 or email us and we will give you a straight answer before you book.
Where we work in Great Sampford
- Linear gaps at wall heads
- Cable penetrations
- Pipe penetrations
- Small duct penetrations where the tested detail allows
- Service gaps in risers
- Joints between fire-resisting walls and floors
Do you need fire stopping in Great Sampford?
On a busy project, programme pressure can mean fire stopping is rushed or left to whichever trade is closest. That is how unsuitable products and improvised details end up in compartment walls, which then have to be put right.
Look out for the following:
- Openings found when ceilings come down for a refit
- Fire-stopping items raised at inspection or handover
- Non-fire-rated filler around services
- Head-of-wall gaps with no fire seal
Holiday works at schools like Great Sampford Community Primary School often leave service openings to seal before pupils return.
Questions to ask before you book
- How long is the guarantee, and what does it include?
- Their public liability cover
- Do they follow the manufacturer’s priming guidance?
- How the existing material will be dealt with