Fire stopping in Great Braxted
Work needed on a service penetration in Great Braxted? We assess it, carry out the work and guarantee our workmanship for 12 months.
- Hidden openings found during inspections
- Fire seals cut back for extra cables and never reinstated
- Fire stopping installed outside its tested range
Fire stopping near Great Braxted
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Why act early in Great Braxted
An improvised seal can look finished while offering no tested performance. Correcting it means cutting it out and starting again with the specified product. One visit to deal with every failing joint makes more sense than several trips to a place like Great Braxted. Photos of every joint help us quote for the whole job.
Small jobs and large programmes are priced from the same things: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote and we’ll put a fixed figure on it.
Why clients in Great Braxted choose us
- A Constructionline member, so easy to vet
- Products installed to the manufacturer’s instructions
- Over 20 years of commercial sealing
- CHAS accredited contractor
Read how commercial sealant jobs are priced or our accreditations.
Fire stopping in Great Braxted
We are commercial sealant applicators, CHAS accredited and a Constructionline member, with CSCS-carded applicators on site. We don’t hold a third-party fire-stopping installer certificate, and we won’t pretend otherwise. What we offer is careful installation of the specified sealant to its tested detail, with a 12-month guarantee on our workmanship. If you have non-fire-rated filler around services and seals disturbed by maintenance and left open, we can put it right, whatever the surface. Looking for mastic applicators who cover Great Braxted? Mastic Doctor has worked for contractors, FMs and building owners since 2005.
Rural conversions around Great Braxted can put new fire-resisting partitions inside older structures. Where a pipe or cable passes through a fire-resisting wall, the seal must match the tested detail: product, substrate, gap and depth.
We stand behind the joints we seal: 12 months, guaranteed. It covers how we prepared and applied the sealant, and we come back if anything isn’t right.
- Where
- Great Braxted (CM8)
- Region
- Essex
- Guarantee
- 12 months on every job
- Price
- A fixed quote before we start
- Phone
- 01277 525 020
- Updated
- 3 November 2026
Great Braxted: questions and answers
Is Great Braxted too small for you to travel to?
Not at all: smaller places are covered as well as towns. Our area covers London and the South East counties. We plan jobs in smaller places so return trips are kept to a minimum.
Will you design a fire-stopping scheme for our building in Great Braxted?
No, that sits with the designer, fire engineer or building control. We install what’s specified, to the product’s tested detail.
Who decides which product is used?
A specification, where there is one, decides it. If there isn’t one, it comes down to the joint: its movement, its surfaces and what it has to cope with.
Can one quote cover more than one building?
Yes. A group of buildings can go on one quote, with one point of contact across South East England, Greater London and Scotland.
Will you come and look before quoting?
That depends on the size and complexity of the job. Simple work can often be priced from photos, while larger or less clear jobs get a site visit first.
Will you just go over the old sealant?
No. We cut the old material out and clean the joint back before sealing, since fresh sealant will not bond reliably to aged material.
Does the weather affect the work?
It can, when the joints are outside. Wet joints and cold, damp or frosty conditions stop the sealant bonding properly, so external work may be moved if conditions aren’t right. Indoors, the weather is rarely a problem.
Fire-rated sealing for Great Braxted buildings
Great Braxted lies roughly 40 miles out from central London. Offices around the capital are refitted often, and the cabling that follows can breach fire-resisting walls, and the gaps need sealing with the specified product. In England, Approved Document B covers fire stopping of openings and penetrations. From 2 September 2029, BS 476 references are being taken out of Approved Document B, leaving BS EN 13501-2 classification as the route, subject to the Government’s transitional arrangements. Our part stays the same: the specified product, installed to its tested detail.
Older community buildings such as Church of All Saints that have been rewired or given new heating can have service gaps through walls worth checking against the specification.
Great Braxted is about 3 miles east of Witham, in Essex. Across the CM8 postcode area, the process is the same: details in, fixed quote out, then sealing and a 12-month guarantee. Great Braxted is one of 644 places in Essex on our list for service penetrations. We also cover London, around 40 miles from Great Braxted.
Commercial sites across CM8 are covered for service penetrations. If your site is on Bung Row and Tiptree Road or close by, send details and we will quote for service penetrations. Sites close to Great Braxted are covered too, including Beacon Hill (1 mile south-west), Great Totham (2 miles south), Wickham Bishops (2 miles south-west), Broad Street Green (3 miles south) and Langford (3 miles south-west). Nearby towns on our patch include Colchester (11 miles north-east), Chelmsford (10 miles south-west), Braintree (8 miles north-west), Maldon (5 miles south), Rayleigh (15 miles south) and Witham (3 miles west).
Landmarks near Great Braxted
In Great Braxted, that means premises near The Green Man pub and Whet Mead. The nearest railway station is Witham station, roughly 2.6 miles west. A little further out are Anchor Press Museum (2.7 miles north-east). Green spaces nearby include Shut Heath Wood.
Do you need fire stopping in Great Braxted?
Head-of-wall joints and wall-to-wall junctions are frequent weak points. Deflection and building movement can open these gaps. Linear joint details set a width range and movement capability, and the seal has to sit within them.
Most enquiries start with something like this:
- Service penetrations left open after M&E works
- Head-of-wall gaps with no fire seal
- Fire-rated sealant that has cracked or shrunk back
- Hidden openings found during inspections
Around Great Braxted, we install fire-rated and intumescent sealant to the product’s tested detail wherever it is the specified product.
Questions to ask before you book
- Health and safety accreditation such as CHAS
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
- Their plan for phasing and protecting the area
- Is the sealant right for the movement and the substrate?
Should maintenance staff do it?
For most general trades, sealant is a sideline. A specialist prepares properly, controls joint depth and picks a product with the right movement class.
Site maintenance staff can often handle a short internal joint. Where it goes wrong is preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
For managing agents and facilities managers
We take on planned maintenance as well as one-off repairs: resealing failed joints building by building, on a schedule that suits your budget. Sites in Great Braxted can sit alongside others in a wider programme across Essex.
Whether you’re a managing agent, a property factor or an owner’s representative: send the details, accept a fixed quote, and we carry out and guarantee the work. We can agree access arrangements and keyholder contacts beforehand.
How a job runs
We bring the products specified for the job, along with primers and backing rod. Any old material is cut back to clean, sound faces, primer goes on where the manufacturer specifies it, and the sealant is tooled off neatly. Rural sites near Great Braxted may need directions, gate codes or a contact on site. Send that with the details and we’ll confirm the plan with the quote.
- We read the specification, drawings or penetration schedule you send and raise any questions before we price.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- We fit the backing the detail asks for, to the stated depth.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
Getting the site ready
- Move anything stored against the joints
- Confirm the product named in the specification
- Explain the parking and delivery arrangements
Ask for a quote
If there’s a specification, drawings or a tender package, send it with your enquiry, and we will price against exactly what is specified. Smaller jobs need nothing more than photos and a few notes.
Advice
When it isn’t the sealant
We check first that sealant really is the fix. It won’t put right:
- Openings that need collars, wraps, batts or boards rather than sealant
- Gaps in walls that were never built as compartment walls
- Fire risk assessments, a job for a competent assessor
If in doubt, ring 01277 525 020 or email us and we will say what we think before you book.
What we seal
- Cable penetrations
- Service gaps in risers
- Small duct penetrations where the tested detail allows
- Pipe penetrations
- Linear gaps at wall heads
- Joints between fire-resisting walls and floors