Fire Stopping in Fox Street
Our CSCS-carded applicators take on fire-rated and intumescent sealing of service penetrations and linear gaps in Fox Street and the surrounding area. Send photos or drawings for a fixed quote.
- Unsealed joints where partitions meet the slab
- Hidden openings found during inspections
- Snag lists that include open service penetrations
Fire stopping in Fox Street
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Honest limits
Some faults sit outside our scope, and we point that out rather than sealing over them:
- Plastic pipes whose detail calls for a collar or wrap
- Fire risk assessments, a job for a competent assessor
- Construction that lacks the fire resistance the seal relies on
Not sure which it is? You can call 01277 525 020 or email drawings and photos and we will tell you honestly before you book.
What we seal
- Service gaps in risers
- Joints between fire-resisting walls and floors
- Cable penetrations
- Linear gaps at wall heads
- Pipe penetrations
- Small duct penetrations where the tested detail allows
Fire stopping in Fox Street
Every service that crosses a compartment wall or floor leaves an opening, and that opening needs sealing to hold back fire and smoke. Our job is fitting fire-rated and intumescent sealant at those service penetrations, and along linear gaps, where it is the specified product. We work to the product’s tested detail for every seal rather than guesswork. We work on joints between fire-resisting walls and floors, cable penetrations and linear gaps at wall heads, and what we are called in for most is expanding foam used as fire stopping and head-of-wall gaps with no fire seal. A specialist sealant contractor works differently from a general builder: on jobs in Fox Street, preparation and product choice get the time they need.
Smaller places such as Fox Street still have buildings with fire-resisting walls and floors: schools, halls, care homes and commercial conversions. Any service penetration through those walls should be closed with the specified product, set out as its test evidence shows.
The 12-month guarantee is for workmanship rather than wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we are clear about what is covered before work starts.
- Location
- Fox Street (CO7)
- Region
- Essex
- Cover
- 12 months on every job
- Quote
- A fixed quote before we start
- Call
- 01277 525 020
- Updated
- 3 November 2026
What we’re called out for in Fox Street
Openings in fire-resisting walls typically appear when services are added or changed. New cabling, rerouted pipework or a data route drilled through a riser leaves an opening that nobody returns to. Over a few years of fit-outs, a wall can collect a lot of these.
Typical triggers for a call:
- Fire sealant pulled out of the opening
- Penetration schedules that need working through
- Unsealed penetrations discovered above suspended ceilings
- Seals disturbed by maintenance and left open
Residences at universities like University of Essex, 2.4 miles to the south of Fox Street, have compartment walls that must be resealed whenever services change.
What your quote should include
- Their approach to joint depth and backing
- Their pre-qualification and accreditations
- Will CSCS-carded applicators be on site?
- How they handle RAMS and site documents
Diagnose, treat, sign off
We bring the products specified for the job, along with primers and backing rod. Any old material is cut back to clean, sound faces, primer goes on where the manufacturer specifies it, and each bead is tooled to a neat concave finish. For a building around Fox Street, tell us how to find it and who will meet us. Send that with the details and we’ll confirm the plan with the quote.
- The specification and schedule come first, so we know which details apply.
- Access, permits and the order of areas are agreed with the site team.
- We compare every service penetration with its tested detail before sealing.
- Unsuitable material is removed and the opening cleaned so the seal starts clean.
- Backing and fire-rated sealant are installed to the detail and tooled.
- We tell you about openings that need a different product.
Getting the site ready
- Warn occupants and staff about the work
- Point out parking and an unloading spot
- Send any specification or drawings in advance
Quotes
Send us photographs, drawings or a joint schedule are often enough for a fixed quote. Where a site visit makes more sense, we’ll arrange one.
Advice
Towns and villages near Fox Street
Other services in Fox Street
Site staff or a sealant specialist?
Redoing a failed joint normally costs more than getting it right at the outset, because the whole bead must be removed and the faces cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
There’s also the paperwork. Many sites expect CSCS cards, RAMS and proof of insurance, and our CSCS-carded applicators are used to working under those rules.
Leave it or put it right?
An improvised seal can look finished while offering no tested performance. Correcting it means cutting it out and starting again with the specified product, and doing it once, properly, is cheaper. For buildings around smaller places like Fox Street, water damage can go unnoticed for longer, especially where a building isn’t used daily, so a failed joint can leak for a while before anyone sees it. Resealing early avoids that.
A quote for service penetrations depends on how many there are, their condition and the access. Ask us for a fixed quote.
What you get with us
- CHAS accredited contractor
- Work carried out by CSCS-carded applicators
- Over 20 years of commercial sealing
- Failed material removed, not covered up
Take a look at how commercial sealant jobs are priced and our accreditations.
Surface by surface
Masonry and concrete
Block walls and concrete floors are common substrates for penetration seals. Dust and debris are cleared from the opening.
Small ducts
Some fire-rated sealant details cover small ducts. Larger or fire-rated ductwork usually needs a different solution set by the designer.
Questions we’re asked in Fox Street
Could you schedule work at a campus like University of Essex for the vacation?
Yes. Education sites typically want the work in vacations or in phases during term, and we plan to suit. Let us know which documents your site asks for, and we’ll confirm them alongside the quote.
Do you take on work at healthcare sites like Colchester General Hospital?
Yes, healthcare and care buildings are part of our work. Before anything starts, the estates team agrees permits, inductions and infection-control measures with us.
Can you fire stop behind the services contractors?
Yes. Send the schedule or marked-up drawings and the specified product details for a fixed quote. We can follow the services contractor floor by floor.
How soon can the area be used again?
The product and site conditions decide that. Some products skin over quickly but need longer to cure fully, and we confirm it before leaving site.
Are you members of a third-party fire-stopping installer scheme?
No, and we’d rather be clear about that. Third-party schemes aren’t a legal requirement, but many clients and main contractors ask for them, so check your contract first. Where it isn’t required, we install the specified sealant to the maker’s details.
What do you charge?
It depends on the job: quantities, access, the product and any phasing. Call for a quote.
Do you guarantee your work?
Yes. The 12-month guarantee covers our preparation and application, though not damage or work by other trades.
Fire stopping around Fox Street: points for this area
Fox Street has four care or nursing homes no more than 2 miles away. Care settings depend on compartmentation, so service penetrations made during maintenance or refurbishment need sealing with the specified product. Central London is about 53 miles from Fox Street. Business park offices in the commuter belt are refitted as tenants change, and each fit-out adds services through compartment walls.
Office fit-outs on sites such as Crown Business Centre (to the north-west of Fox Street) add cabling and pipework through fire-resisting walls, and fire-rated sealant goes in where the specification calls for it. For a unit at a centre such as Hunwicke Shopping Centre (1.8 miles south of Fox Street), penetration seals are worth checking after each shop fit.
Fox Street is about 3 miles north-east of Colchester, in Essex. Looking for fire stopping in Fox Street? We can help, as we do across Essex. 644 places across Essex fall within our area, Fox Street among them. For work in that direction, see our London page.
Anyone looking for fire stopping in CO7 gets the same process as the rest of our area: send details, get a quote, we seal, guaranteed. For a building on Colchester Road, Crown Lane South and Fox Wood Chase or nearby, we can quote for service penetrations. Close to Fox Street, our area also takes in Ardleigh (2 miles north-east), Ardleigh Heath (2 miles north-east), Langham (3 miles north), Lamb Corner (3 miles north-east) and Hornestreet (3 miles north). Nearby towns on our patch include Colchester (3 miles south-west), Clacton-on-Sea (11 miles south-east), Harwich (13 miles east), Camulodunum (4 miles south-west), Halstead (14 miles west) and Tiptree (11 miles south-west).
What’s near Fox Street
We work on buildings around Gilberd School and Welsh Wood. Fox Street’s nearest station is Hythe station, roughly 2.1 miles south-west of the centre. A little further out are Lion Walk (2.7 miles south-west) and Colchester Castle (2.5 miles south-west). Open spaces near Fox Street include Westhouse Wood.