Fordham fire stopping
Fire stopping in Fordham, backed by over 20 years in commercial sealing. Fully insured, with a 12-month guarantee.
- Seals disturbed by maintenance and left open
- Fire-rated sealant that has cracked or shrunk back
- Fire stopping installed outside its tested range
Need fire stopping in Fordham?
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
For managing agents and facilities managers
FMs need a contractor who is easy to get on site. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we will confirm with the quote.
As a CHAS accredited contractor and Constructionline member, we’re straightforward to vet for your supplier list. Our insurance certificate can be sent along with the quote.
How we handle fire stopping in Fordham
Penetration seals are fire tested to BS EN 1366-3 and linear joint seals to BS EN 1366-4 and the results are classified to BS EN 13501-2. That classification, such as EI 60 or EI 120, belongs to the product in its tested arrangement. So our job is to reproduce that arrangement faithfully. If you have fire seals cut back for extra cables and never reinstated and open linear gaps along the top of fire-resisting walls, we can help, on small duct penetrations where the tested detail allows, joints between fire-resisting walls and floors and service gaps in risers alike. Most enquiries from Fordham start with one failed joint and grow into a wider look at the building: we look at the rest while we are there and tell you what we find.
Barn and farm-building conversions near places like Fordham often combine new partitions with old walls. A penetration seal only performs as tested if product, substrate, service, gap and depth all match the detail.
Our 12-month guarantee is about workmanship, not wear and tear. Sealant wears with time, and movement, weather, cleaning and use decide how fast, so we spell out the cover before we begin.
- Place
- Fordham (CO6)
- Wider area
- Essex
- Cover
- A 12-month guarantee
- Quotes
- A fixed quote before we start
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
When to bring in a specialist
Paperwork matters too. Many sites expect CSCS cards, RAMS and proof of insurance, and our CSCS-carded applicators are used to working under those rules.
The visible bead is only part of the job. Backing rod, primer where specified and a joint designed to move with the building are where general trades tend to cut corners.
Looking after the joints
After handover, these steps help:
- Keep general-purpose fillers away from compartment walls
- Check with the data sheet before painting over fire sealant
- Agree the fire-stopping specification before services go in
- Record which product was used where
Keep the product data and installation details with the building’s fire safety information. Anyone resealing later needs to know which product and detail were used.
Make reporting new openings part of every permit to work in service areas. It costs little and catches breaches early.
Signs you need fire stopping in Fordham
When a seal departs from its tested detail, the evidence no longer covers it. Gaps beyond the tested size, shallow sealant, no backing where it was needed, or products from different systems mixed together are what we find most often.
Typical triggers for a call:
- Openings found when ceilings come down for a refit
- Fire stopping installed outside its tested range
- Fire seals cut back for extra cables and never reinstated
- Penetration schedules that need working through
Shop fits on retail sites such as Stane Retail Park, 2.5 miles to the south-east of Fordham, can bring new services through fire-resisting walls between units, to be sealed with the specified product.
Before you book anyone
- What level of public liability insurance do they hold?
- How long is the guarantee, and what does it include?
- Which product they’ll use, and why it suits the joint
- Their approach to joint depth and backing
Nearby places to Fordham
Also in Fordham
Fire stopping around Fordham: points for this area
Approved Document B is the English guidance that covers fire stopping around openings and penetrations. From 2 September 2029, BS 476 references are being taken out of Approved Document B, leaving BS EN 13501-2 classification as the route, subject to the Government’s transitional arrangements. We install whatever has been specified, to the product’s tested detail. Fordham lies roughly 48 miles out from central London. Office refits around the commuter belt bring new cabling through fire-resisting walls; the gaps need the specified seal.
In a building such as Church of All Saints, any service penetration through a fire-resisting wall should be sealed to the specified detail. Wherever services are added at a hospital such as Severalls Hospital, 3.9 miles east of Fordham, the compartment line has to be made good with the specified product.
Fordham is about 5 miles north-west of Colchester, in Essex. Across the CO6 postcode area, the process is the same: send details, get a fixed quote, we seal, and the work is guaranteed. Our Essex coverage takes in 644 places, large and small. There’s a separate page for London, roughly 48 miles from Fordham.
Anyone looking for fire stopping in CO6 gets the same process as the rest of our area: send details, get a quote, we seal, guaranteed. Streets here include Church Road, Herring's Way and Sunnyside Road. We also cover Fordham Heath (1 mile south), Gallows Green (1 mile south), Wormingford (2 miles north), West Bergholt (2 miles east) and Little Horkesley (3 miles north-east) for service penetrations. Further afield, our area takes in Colchester (5 miles south-east), Braintree (11 miles west), Maldon (14 miles south), Witham (11 miles south-west), Camulodunum (4 miles south-east) and Halstead (7 miles west).
Around Fordham
We work on buildings around The Three Horseshoes Public House and the streets around them. For rail, the closest station is Chappel & Wakes Colne station, roughly 1.9 miles west of the centre. Other landmarks nearby include Severalls Hospital (3.9 miles east) and Mount Bures (2.9 miles north-west). Green spaces nearby include Sergeants Orchard.
Our process
Inspect, seal, sign off: that’s the shape of every visit. First comes an inspection and agreement on scope, then the work is carried out to the specified product and detail, and the job ends with a walk round and sign-off. For a building around Fordham, tell us how to find it and who will meet us. Send that with the details and we will confirm the plan with the quote.
- The specification and schedule come first, so we know which details apply.
- We plan the sequence of floors, risers and voids with you.
- Each opening is checked for wall or floor type, service, gap and depth.
- Foam, ordinary sealant and debris come out so the seal starts clean.
- Backing and fire-rated sealant are installed to the detail and tooled.
- We tell you about openings that need a different product.
Preparing the site
- Tell us what induction or permit system the site runs
- Share your working hours and any access restrictions
- Send asbestos survey details if the building is pre-2000
Request a quote
A good quote starts with a clear picture: what’s there, how much of it, how we reach it and what’s specified. Send what you have, and we will arrange a site visit if anything is unclear.
Read more
Quoting for work in Fordham
The price varies from site to site. Expect it to depend on:
- The product specified
- Whether old sealant has to be cut out first
- Phasing around occupants
- Distance, for remote addresses
The product called for affects the cost, as does the preparation each joint needs, such as cutting out, priming or new backing rod. Access, phasing and site requirements come into it too.
Sending details for a quote
However big the job, the same details help:
- Asbestos survey details if the building is older
- Anything awkward about access or site hours
- Rough lengths or quantities, or drawings if you have them
- Any specification or named product
To get a fixed quote, call 01277 525 020 or send photos by email, telling us the site location and the nature of the job. You can also send details through our quote form.
Common questions from Fordham clients
How does the move away from BS 476 affect penetration seals in Fordham?
Approved Document B loses its BS 476 references from 2 September 2029, and BS EN 13501-2 becomes the route, subject to transitional arrangements. Whichever applies, we install the specified product to its tested detail; the specification is for the designer to set.
Can you work at a site such as Stane Retail Park, by Fordham?
Yes. We cover Fordham and the area around it, including industrial estates, business parks and retail parks such as Stane Retail Park. Photos and a short description are enough for a first look.
What hours do you work?
We’re in the office from 8am until 5pm, Monday to Friday. Let us know your site hours and access windows, and the work will be planned around them.
How soon can the area be used again?
The product and site conditions decide that. Some take light use quickly, others need longer to cure, and we confirm it before leaving site.
How do we ask for a quote?
You can use the quote form on this site; alternatively, call 01277 525 020 or email the details over. Include photographs or drawings if you have them.
Can you follow the specification on our project?
Yes. The specification and the manufacturer’s installation guidance are what we work to.
How long does a typical visit take?
That varies with the scale of the job, though a typical visit normally takes a single visit for a short list of penetrations, or a phased programme for a whole building. Larger or phased jobs take longer, and we’ll give you a timescale with the quote.