Fire Stopping in Dengie
Looking for fire stopping in Dengie? It’s simple: send details, get a quote, we seal, guaranteed.
- Unsealed joints where partitions meet the slab
- Openings found when ceilings come down for a refit
- Fire-rated sealant that has cracked or shrunk back
Fire stopping for Dengie sites
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
How a job runs
In a busy building, the work is phased so only one area is out of use at a time. Each area is protected, prepared and sealed, then handed back before the next one starts. If others near Dengie need work, visits can be combined. You will have a fixed quote before work starts.
- First we confirm the product and tested details named in the specification.
- Openings are measured and grouped by detail.
- Improvised fillers and failed sealant are removed.
- Where the detail needs backing, it goes in at the stated depth.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- We walk the completed areas with you and confirm the records agreed at quote stage.
Preparing the site
- Send your site hours and access windows
- Flag any permit to work we will need
- Explain the parking and delivery arrangements
Get a fixed quote
Quotes are fixed against the scope you send, so you know the figure before anyone is on site. To ask for one, phone 01277 525 020 or use the quote form.
Related advice
How we handle fire stopping in Dengie
Facilities managers in Dengie often find open service penetrations when ceilings come down for other work. If a specification already covers those walls and floors, we can reseal to it. Where there isn’t one, the designer or fire engineer needs to set one first. We work on cable penetrations, joints between fire-resisting walls and floors and service gaps in risers, and the failures we are asked to look at most are seals that don’t match their tested detail and openings found when ceilings come down for a refit. Whoever orders the work in Dengie, the brief is usually the same: a clear scope, tidy work and joints that don’t fail again.
Rural conversions around Dengie can put new fire-resisting partitions inside older structures. Where a pipe or cable passes through a fire-resisting wall, the seal must match the tested detail: product, substrate, gap and depth.
Every job we finish is backed by a 12-month workmanship guarantee. If a joint we sealed fails because of how it was installed, we come back and put it right.
- Where
- Dengie (CM0)
- Region
- Essex
- Guarantee
- 12 months on our workmanship
- Price
- A fixed quote before we start
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
More services for Dengie
Should maintenance staff do it?
The visible bead is only part of the job. Backing rod, primer where specified and a joint designed to move with the building are where general trades tend to cut corners.
Putting right a botched joint often costs more than sealing it well at the start, since all of it has to come out and the faces be cleaned back again. That’s why many clients bring in a specialist from the beginning.
Maintenance after handover
Regular inspection catches problems early. Specifically:
- Make fire stopping part of every scope that crosses a fire-resisting wall
- Ask which product is in place before decorating
- Include service cupboards in routine inspections
- Get seals inspected before ceilings and boxing close
Don’t patch a fire-rated seal with anything outside its tested detail. A repair should use the original product, installed the same way.
Ask every contractor who works in risers or voids to report openings they create. It costs little and catches breaches early.
What affects the price in Dengie
Your fixed quote is built from the real scope. It takes account of:
- Removal of failed or old sealant
- Working within restricted access windows
- Site requirements such as inductions and permits
- The product specified
Quantities, awkward access and phased working all shape the price. Site requirements like inductions and permits play a part as well.
What to include in your enquiry
Good information means a firmer quote. Helpful details to send:
- Asbestos survey details if the building is older
- Any specification or named product
- What the building is and how it’s used
- Rough lengths or quantities, or drawings if you have them
A good quote starts with a clear picture: the joints involved, quantities, access and the product called for. Send what you have, and we’ll arrange a site visit if anything is unclear.
Common questions from Dengie clients
Will you plan work around the academic year at somewhere like University of Essex?
Yes. Education sites normally want the work in vacations or in phases during term, and we plan to suit. Let us know which documents your site asks for, and we will confirm them alongside the quote.
How does the removal of BS 476 from Approved Document B affect fire-rated sealing in Dengie?
From 2 September 2029, Approved Document B drops its BS 476 references in favour of BS EN 13501-2 classification, with transitional arrangements. Our part doesn’t change: the specified product, to its tested detail.
How many days will you need on site?
The duration is planned around your programme and the access we are given. We’ll give you an estimate of time on site when we quote.
Which sealant will you use?
The specification comes first, if there is one. Without one, the joint decides: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.
How do we ask for a quote?
The quote form is the simplest route, though you can also ring 01277 525 020 or send photos by email. Include photos or drawings if you have them.
Is the work guaranteed?
Yes. The 12-month guarantee covers our preparation and application, but not damage, misuse or other trades’ work.
Is Dengie in your area?
Yes. Dengie is in our area. To discuss a job, call the office on 01277 525 020 or use the quote form.
Penetration seals near Dengie
At about 43 miles from central London, Dengie is within reach of the capital. Offices around the capital are refitted often, and the cabling that follows can breach fire-resisting walls, and the gaps need sealing with the specified product. For England, the fire stopping of penetrations is dealt with in Approved Document B. Its BS 476 references are being withdrawn from 2 September 2029, with BS EN 13501-2 classification taking over, subject to transitional arrangements. What we install is set by the specification, and it goes in to the tested detail.
Halls and meeting rooms at places like Church of St James sometimes gain new services, and any compartment wall crossed needs the specified seal.
Dengie is about 4 miles north-east of Burnham-on-Crouch, in Essex. Dengie sits inside our coverage, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. Our Essex coverage takes in 644 places, large and small. London is covered too, some 43 miles away.
Postcode districts covered here: CM0. Among the streets we cover are Hall Road and Manor Road, and sites on any of them can send details for a fixed quote. Nearby places we also cover include Asheldham (1 mile west), Tillingham (1 mile north), Southminster (2 miles south-west), Steeple (3 miles west) and Stoneyhills (3 miles south-west) for service penetrations. Further afield, our area takes in Colchester (15 miles north), Clacton-on-Sea (15 miles north-east), Maldon (9 miles north-west), Rayleigh (13 miles south-west), Witham (13 miles north-west) and Rochford (10 miles south-west).
Around Dengie
The closest station to Dengie is Southminster station, roughly 2 miles south-west. Open spaces near Dengie include Dengie SPA.
Do you need fire stopping in Dengie?
On a busy project, programme pressure can mean fire stopping is rushed or left to whichever trade is closest. That is how unsuitable products and improvised details end up in compartment walls and later need putting right.
These are often picked up first by site or facilities staff:
- Fire-stopping items raised at inspection or handover
- Openings left by services added after handover
- Non-fire-rated filler around services
- Fire seals cut back for extra cables and never reinstated
For an estates team at a campus like University of Essex, which lies north-west of Dengie, summer M&E works are normally followed by a round of penetration sealing.
Before you book anyone
- What site paperwork they can supply
- The terms of the workmanship guarantee
- Their public liability cover
- How the joint faces will be prepared and primed
What happens if it’s left?
Open penetrations multiply: every new cable or pipe adds another. A schedule that is dealt with regularly stays manageable. Converted and older buildings near places like Dengie tend to move, and aged sealant cracks. The right product, sized to the joint, copes much better.
Pricing service penetrations depends on quantities, condition and access, and any specification that applies. Ask us for a fixed quote.
Why us?
- Constructionline member
- Fully insured
- 12-month guarantee on workmanship
- Failed material removed, not covered up