Dalabrog fire stopping
Planning work on a service penetration in Dalabrog? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Improvised or mixed-product fire seals
- Snag lists that include open service penetrations
- Openings left by services added after handover
Need fire stopping in Dalabrog?
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Signs you need fire stopping in Dalabrog
Linear gaps fail where a fire-resisting wall meets a slab, soffit or another wall. Deflection and building movement can open these gaps. Linear joint details set a width range and movement capability, and the seal has to sit within them.
It’s worth sending us details if you spot any of the following:
- Head-of-wall gaps with no fire seal
- Fire-stopping items raised at inspection or handover
- Openings left by services added after handover
- Seals disturbed by maintenance and left open
Hotels such as Borrodale Hotel, 0.5 miles west of Dalabrog, rely on fire-resisting walls between bedrooms and corridors, and refits that add services leave penetrations to seal where fire-rated sealant is specified.
What your quote should include
- Health and safety accreditation such as CHAS
- Who will actually carry out the work
- The named product and why it was chosen
- What site paperwork they can supply
How we handle fire stopping in Dalabrog
Our applicators are CSCS-carded, and we are CHAS accredited and a Constructionline member. We don’t hold a third-party fire-stopping installer certificate and we’d rather say that up front. We install the specified fire-rated sealant to its tested detail, and our workmanship carries a 12-month guarantee. The enquiries we see most involve old intumescent sealant that has split away and fire seals cut back for extra cables and never reinstated, across service gaps in risers, joints between fire-resisting walls and floors and pipe penetrations. Whether you call it commercial sealant work, mastic application or joint sealing, the work in Dalabrog is the same: the right product in a properly prepared joint.
Hotels and care homes around smaller places like Dalabrog often have services added during refurbishment. We fit the specified fire-rated sealant as its published detail shows and raise it if another product is needed.
We sign every job off with a 12-month guarantee. It’s a plain promise: if our work fails within that year, we put it right.
- Location
- Dalabrog (HS8)
- Wider area
- Na h-Eileanan Siar
- Guarantee
- A 12-month guarantee
- Quotes
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Updated
- 3 November 2026
What sealant work can’t fix
Sealant solves a lot, but not everything, and we’d rather tell you before you spend money. It won’t fix:
- Large openings beyond what any sealant detail covers
- Issuing fire ratings or certificates for seals
- Designing or specifying fire stopping, which sits with the designer or fire engineer
If you’re not sure, just call the office on 01277 525 020 or email a schedule or drawings and we will give you a straight answer.
Where we work in Dalabrog
- Joints between fire-resisting walls and floors
- Small duct penetrations where the tested detail allows
- Service gaps in risers
- Pipe penetrations
- Linear gaps at wall heads
- Cable penetrations
Also near Dalabrog
More services for Dalabrog
Compartment walls and floors in Dalabrog
Scottish guidance (non-domestic Technical Handbook, clause 2.1.14) asks that penetrations match at least the fire resistance period of the element they pass through, and products should be tested for their end use. Our part is installing the specified fire-rated sealant to its tested detail. Being on an island, Dalabrog means planning around ferry times as well as the weather. We need the specification and a count of penetrations before we sail.
Halls and meeting rooms at places like Daliburgh Parish Church sometimes gain new services, and any compartment wall crossed needs the specified seal.
Dalabrog (Gaelic: Daliburgh) is in Na h-Eileanan Siar. Any commercial site in Dalabrog is covered, whether it’s a single job or part of a planned programme. 87 places across Na h-Eileanan Siar fall within our area, including Dalabrog.
Work on service penetrations is covered throughout HS8. Nearby places we also cover include Loch Baghasdail (2 miles east), Lochboisdale (2 miles south-east), Rubha Ban (6 miles south), Eòlaigearraidh (9 miles south) and Cuidhir (12 miles south). Remote and island addresses take more planning, from travel and ferries to the weather, so give the site location in your enquiry.
Around Dalabrog
A little further out are Calvay Castle (3.9 miles south-east). For a walk, there’s Loch Hallan and Layaval.
When to bring in a specialist
Paperwork matters too. Many sites expect CSCS cards, RAMS and proof of insurance, and we’ll confirm the paperwork you need with the quote.
The visible bead is only part of the job. Backing rod, primer where specified and a joint designed to move with the building are where general trades tend to cut corners.
Your questions answered
What do Scotland’s building standards say about service penetrations in Dalabrog?
Scotland’s non-domestic Technical Handbook covers it in clause 2.1.14: penetrations keep at least the element’s fire resistance duration, with products tested for their end use. Design sits with the designer and the verifier; installation to the tested detail is our part.
Can you take on a job in Dalabrog, on the island?
Yes. Islands are part of our area, Dalabrog included. We plan island jobs around the ferry and the forecast, and bring everything the job needs on the first crossing.
Can staff carry on working while you’re here?
Yes, with some planning. We agree a sequence with your contact so just one area at a time is disrupted.
How long does a job like this take?
That varies with the scale of the job, but the work typically takes a single visit for a short list of penetrations, or a phased programme for a whole building. Larger or phased jobs take longer, and we’ll give you a timescale with the quote.
Who decides which product is used?
If the job is specified, we follow the specification. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.
What if there’s asbestos in the old mastic?
Some older mastics, especially in pre-2000 buildings, can contain asbestos. We check the asbestos register before cutting out old sealant in an older building, and work stops until any suspect material has been tested. Removing asbestos is a job for asbestos specialists, not us.
Is it fine to apply new sealant on top of old?
No. Failed sealant is removed and the faces cleaned back to sound, dry material first, since fresh sealant will not bond reliably to aged material.
Our process
Before we leave any area, we remove the tape, clean down and inspect every joint with your site contact. Where the sealant needs time to cure before use, we tell you and sign the area. Tell us who will meet us and how to get in at your building near Dalabrog. That goes into the plan alongside the quote.
- We start with your penetration schedule, drawings or specification.
- We plan the sequence of floors, risers and voids with you.
- Each opening is checked for wall or floor type, service, gap and depth.
- Unsuitable material is removed and the opening cleaned first.
- The specified backing and sealant go in to depth and are finished neatly.
- Anything outside the detail is reported to you rather than sealed.
Getting the site ready
- For older buildings, check the asbestos register before work
- Point out parking and an unloading spot
- Tell staff and tenants when we’ll be in
Get a fixed quote
We quote a fixed sum against the scope you give us, so you know the figure before anyone is on site. To ask for one, ring 01277 525 020 or email the details over.
Read more
Keeping the joints sound
Sealant joints are maintenance items, and their life depends on movement, exposure, cleaning and use. We suggest:
- Treat an open penetration as a priority repair
- Include service cupboards in routine inspections
- Get seals inspected before ceilings and boxing close
- File the specified details where the next contractor can find them
During planned inspections, look at seals in risers, cupboards and voids. Look for cracks, unsealed new cables and gaps that have been enlarged.
Write fire stopping into the scope of any work crossing a compartment wall or floor. Then the seal goes in while the area is open.
What sets the cost
Sealant work doesn’t have a standard rate, because every site is different. What we take into account:
- Whether the work must be split into stages
- The total length or number of joints
- Travel to remote or island sites
- Site requirements such as inductions and permits
A quote for service penetrations depends on quantities, condition and access. Call for a quote.
What to include in your enquiry
There’s no need for a formal survey. A few details are enough to get going:
- The postcode of the building
- The type of building and who uses it
- Approximate linear metres or a joint schedule
- Specification clauses that apply
Pricing a project or setting a maintenance budget? We will quote against your scope and drawings that you can work with. If you have questions first, ring 01277 525 020 or send photos by email.