Fire-rated sealing and fire stopping in Chapel Row, West Berkshire
Fire-rated and intumescent sealing of service penetrations and linear gaps across Chapel Row, carried out by CSCS-carded applicators. Fully insured and CHAS accredited.
- Unsealed penetrations discovered above suspended ceilings
- Seals disturbed by maintenance and left open
- Open linear gaps along the top of fire-resisting walls
Fire stopping for businesses in Chapel Row
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Questions about Chapel Row
How does the removal of BS 476 from Approved Document B affect fire-rated sealing in Chapel Row?
From 2 September 2029, Approved Document B drops its BS 476 references in favour of BS EN 13501-2 classification, with transitional arrangements. Our part doesn’t change: the specified product, to its tested detail.
Can you work at a site such as Fronds Park Business Park, by Chapel Row?
Yes, sites like Fronds Park Business Park are within our area, along with the rest of Chapel Row. A few photographs and the unit address let us price the work.
How much does the work cost?
There isn’t a price list, as every site differs. Send photographs or drawings and we’ll price it at a fixed figure.
Can you follow the specification on our project?
Yes. Send it with your enquiry, and the quote will be based on it, flagging anything that needs clarifying.
How long before the joints can be used?
The product and site conditions decide that. Some take light use quickly, others need longer to cure, and we confirm it before leaving site.
Can one quote cover more than one building?
Yes. A group of buildings can go on one quote, with one point of contact.
Do you offer coloured sealant?
Often, yes. Sealants are made in a wide range of standard colours, and matching to RAL references or nearby finishes is commonly requested. We confirm what’s available for the specified product when we quote.
Fire stopping in Chapel Row, done properly
On a fit-out or refurbishment, we follow the services contractors floor by floor. To price a package, give us a call on 01277 525 020 or email the details over with the schedule or marked-up drawings alongside the manufacturer’s details. Tell us what records you need and we’ll confirm with the quote. We work on cable penetrations, service gaps in risers and linear gaps at wall heads, and the usual reasons a site gets in touch are penetration schedules that need working through and builders’ foam or ordinary silicone in compartment walls. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, in Chapel Row it comes down to the same thing: failed joints cut out, faces prepared and the right sealant laid to the right depth.
Barn and farm-building conversions near places like Chapel Row often combine new partitions with old walls. A penetration seal only performs as tested if product, substrate, service, gap and depth all match the detail.
Guaranteed is the last step of every job. Our workmanship is backed for 12 months, and we explain exactly what that covers when we quote.
- Where
- Chapel Row (RG7)
- Region
- West Berkshire
- Guarantee
- 12 months on every job
- Price
- A fixed quote before we start
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
Fire-rated sealing for Chapel Row buildings
Fire stopping of openings and penetrations in England falls under Approved Document B. Its BS 476 references are being withdrawn from 2 September 2029, with BS EN 13501-2 classification taking over, subject to transitional arrangements. What we install is set by the specification, and it goes in to the tested detail. Chapel Row is about 47 miles from central London. Business park offices in the commuter belt are refitted as tenants change, and each fit-out adds services through compartment walls; the gaps need the specified seal.
For a building at a site such as Fronds Park Business Park (2.1 miles south-east of Chapel Row), a check of penetration seals after each fit-out is good practice. For a building such as Douai Abbey Church, new heating or data runs are the usual reason penetrations need sealing. Wherever services are added at a hospital such as West Berkshire Community Hospital (5 miles west of Chapel Row) the compartment line has to be made good with the specified product.
Chapel Row is about 4 miles east of Thatcham, in West Berkshire. Looking for fire stopping in Chapel Row? We can help, as we do across West Berkshire. We work across 140 places in West Berkshire, from busy centres to rural villages. For work in that direction, see our Reading page.
We cover the RG7 postcode districts for service penetrations. If your site is on Hatch Close, Paradise Lane and Hatch Lane or close by, we can quote for service penetrations. We also cover Upper Woolhampton (1 mile south-east), Midgham Green (1 mile south-west), Beenham (1 mile east), Tutts Clump (1 mile north-east) and Beenham Stocks (2 miles east) for service penetrations. A short drive away, we cover Newbury (6 miles west), Thatcham (4 miles west), Burghfield Common (5 miles east), Speenhamland (6 miles west), Hungerford (15 miles west) and Fords Farm (7 miles east).
What’s near Chapel Row
We work on buildings around The Bladebone Inn. The closest station to Chapel Row is Midgham station, roughly 1.7 miles south of the centre. Nearby you’ll also find West Berkshire Community Hospital (5 miles west) and Yattendon Castle (3.5 miles north). Green spaces nearby include Hosehill Lake and Nature Discovery Centre.
When something else is needed
Some faults sit outside our scope, and we say so rather than covering them up:
- Openings that need collars, wraps, batts or boards rather than sealant
- Construction that lacks the fire resistance the seal relies on
- Writing the fire-stopping specification
If in doubt, phone 01277 525 020 or send photos by email and we will say what we think before you book.
Joints and surfaces we work on
- Pipe penetrations
- Linear gaps at wall heads
- Joints between fire-resisting walls and floors
- Cable penetrations
- Small duct penetrations where the tested detail allows
- Service gaps in risers
Why it’s worth doing now in Chapel Row
Open service penetrations matter on ordinary days, not just in a fire: they also carry noise, draughts and smells between rooms. The specified fire seal closes the gap for all of these. Older rural buildings around Chapel Row move with the seasons, and rigid or tired sealant can’t keep up. A sealant with the right movement capability, correctly sized, lasts far better.
The specified product makes a difference, as does the preparation each joint needs, from cutting out to priming and backing rod. Access, phasing and site rules also count.
Why appoint us
- Work to your specification and the manufacturer’s guidance
- CSCS-carded applicators
- Over 20 years of commercial sealing
- Workmanship guaranteed for 12 months
See our cost guide or our accreditations.
For managing agents and facilities managers
Planned maintenance programmes are welcome: resealing failed joints building by building, on a schedule that suits your budget. Chapel Row can form part of a wider programme.
When you manage a building on behalf of an owner, you need clear quotes and clear reporting. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative.
What sets the cost
Each job is priced on its own details. The things that drive the figure:
- Any access equipment needed
- Working within restricted access windows
- Quantities, in metres or numbers
- Which sealant the job calls for
Access often affects the price as much as the sealing: joints within easy reach take less time than ones that need access equipment. Mention the access as part of your enquiry.
Details that help us quote
There’s no need for a formal survey. A few details are enough to get going:
- Photos of the joints, close up and from further back
- Rough lengths or quantities, or drawings if you have them
- Specification clauses that apply
- How the joints are reached, and at what height
Photos, drawings or a schedule of the joints and a fixed quote comes back to you. Where a site visit makes more sense, we will arrange one.
From enquiry to sign-off
Before we leave any area, the masking comes off, the area is cleaned and every joint is checked, ready for your sign-off. If an area should be left alone while the sealant cures, we say how long and put signs out. For a building around Chapel Row, tell us how to find it and who will meet us. Add it to your enquiry and we will build it into the plan.
- We read the specification, drawings or penetration schedule you send.
- On site, each opening is checked against the tested detail it is meant to follow.
- Unsuitable fillers and loose debris are taken out of each opening.
- Mineral wool or other backing goes in wherever the detail asks.
- We apply the specified sealant to the depth and around the services as the detail shows.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
Before we start on site
- Clear stock, furniture or equipment away from the joints
- Tell us which areas need to stay in use
- Point out parking and an unloading spot
Ask for a quote
Every quote starts with the facts: the joints involved, quantities, access and the product called for. Share whatever details you have and we will fill any gaps with a visit.
Advice
Keeping the joints sound
Your facilities or cleaning team can help the joints last. Share these points with them:
- Flag new cables with no seal around them
- Look above ceilings when tiles are lifted for other jobs
- Ask the designer to confirm details early on refits
- Make fire stopping part of every scope that crosses a fire-resisting wall
After every round of M&E works, check that the openings created have been sealed. Building it into each contractor’s sign-off keeps the walls intact.
On fit-outs, get the fire-stopping specification agreed before the services go in. The designer can then choose details that suit the services planned, and installation follows the programme.